Seorim Technology SVG-3111 Installation instructions

1Channel Video Server SVG-3111 Full Manual
1
1CHANNEL VIDEO SERVER
MODEL: SVG-3111 Wireless
Full Manual (English)
Version 1.0

1Channel Video Server SVG-3111 Full Manual
2
Warning
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the
user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may
be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the
literature accompanying the product.

1Channel Video Server SVG-3111 Full Manual
3
Warning
This equipment has been tested and found to comply with the limits for a Class B Digital Device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment can radiate radio frequency
energy therefore, if it is not installed and used in accordance with the instruction, it may cause
harmful interference to radio communication. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment causes harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution
Any changes or modifications in construction of this device which are not expressly approved by the
party responsible for compliance could void the user’s authority to operate the equipment.

1Channel Video Server SVG-3111 Full Manual
4
Precautions
1. HEED WARNINGS
Adhere to all warnings on the appliance and in the operating instructions.
2. POWER SOURCES
Operate this equipment only from the type of power source indicated on the label. If you are not
sure of the type of power being used, consult your dealer or local power company.
3. OVERLOADING
Do not overload wall units and extension cords, as this can result in a risk of fire or electric shock.
Frayed power cords, damaged or cracked wire insulation, and broken plugs are dangerous.
Periodically examine the cord and replace it if appearance indicates damage or deteriorated
insulation.
4. POWER PLUG PROTECTION
Route the power supply cords so they cannot be walked on or pinched by items placed upon or
against them.
5. VENTILATION
Do not block the slots or openings of the video server and do not place the equipment on a bed,
soft rug, or other similar surface.
6. ATTACHMENTS
Do not use attachments other than those specifically recommended by the equipment
manufacturer as they may cause hazards.
7. TO PREVENT SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR
MOISTURE
If you spill liquid on the unit, consult authorized service personnel. Moisture can damage internal
parts. Do not use this equipment near sources of water.
8. ACCESSORIES
Use only with a manufacturer recommended card, stand, tripod, bracket or table. The equipment
may fall, causing serious injury to a child or adult and serious damage to the appliance.
9. CLEANING THE OUTSIDE SURFACES
Unplug this equipment from the wall outlet before cleaning. Use a damp cloth for cleaning.
10. REQUIRING SERVICE
Unplug the equipment from the wall outlet and request qualified service personnel.
11. SAFETY CHECK
Upon completion of any service or repairs to this equipment, ask the service technician to
perform safety checks to determine that the equipment is in safe operating condition.

1Channel Video Server SVG-3111 Full Manual
5
12. IMPORTANT NOTE TO THE INSTALLER
This installation should be made by a qualified service person and should conform to all local
codes. In order to provide this product with protection against risk of unintentional operation by
employees, customers, janitors and cleaners working on the premises, and from falling objects,
building vibrations and similar causes, it is recommended this product be enclosed in the tamper-
resistant lock box. Make sure that the lock box is well ventilated or maintained with an air cooling
system.

1Channel Video Server SVG-3111 Full Manual
6
Table of Contents
1. Introduction of SVG-3111 Wireless................................................................................8
1.1. Product Overview...................................................................................................8
1.2. Basic Function........................................................................................................8
1.3. Features.................................................................................................................10
1.4. Packing Contents .................................................................................................11
1.5. System Requirements..........................................................................................11
1.6. System Configuration ..........................................................................................12
1.7. Physical Description ............................................................................................13
1.7.1. Front View....................................................................................................13
1.7.2. Rear View.....................................................................................................14
2. Basic Setup of SVG-3111 ..............................................................................................15
2.1. Installation.............................................................................................................15
2.2. Network Setting of a PC.......................................................................................16
2.2.1. Verifying the network setup status of a user PC ....................................16
2.2.2. Operation of the Web Viewer (URL 192.168.1.10) ...................................19
3. Configuration of Network Environment.......................................................................22
3.1. Check-up Network Environment and Installation Type....................................22
3.2. Installation without a Router ...............................................................................24
3.2.1. Basic Network Setup..................................................................................24
3.2.2. DNS Setup....................................................................................................26
3.2.3. Ports Setup..................................................................................................27
3.3. Installation with a Router.....................................................................................28
3.3.1. Network Setup with a Router.....................................................................28
3.3.2 Check the configuration of a ROUTER, SVG-3111 and PC.....................29
4. Display Mode ..................................................................................................................30
4.1. Initial Log-in Screen .............................................................................................30
4.1.1. Installation of the Web Viewer...................................................................30
4.1.2. Initial Log-in Screen of SVG-3111.............................................................31
4.2. Live Page ...............................................................................................................33
4.2.1. Screen Mode................................................................................................33
5. Admin Setting Mode.......................................................................................................34
5.1. General Setting .....................................................................................................34
5.2. Encoder Setting ....................................................................................................35
5.3. Event Setting.........................................................................................................37
5.4. Network Setting ....................................................................................................41

1Channel Video Server SVG-3111 Full Manual
7
5.5. Service Setting......................................................................................................41
5.5. Service Setting......................................................................................................42
5.6. Interface Setting....................................................................................................43
5.7. Motion Detect Setting...........................................................................................46
5.8. User Setting..................................................................................................... 47
APPENDIX A. Video Server Connection Diagram............................................... 48
APPENDIX B. Technical Specification of SVG-3111………………………………………50
APPENDIX C. Troubleshooting............................................................................... 51

1Channel Video Server SVG-3111 Full Manual
8
1. Introduction of SVG-3111 Wireless
1.1. Product Overview
• About the Video Server
SVG-3111 is a highly sophisticated network video server with the embedded Linux operating
system. The equipment is capable of receiving analog video and audio input from four channels.
Measuring only 120 X 28 X115mm, SVG-3111 offers a powerful set of features including alarm
management, event handling, motion detection and remote setup and control. They come equipped
with sophisticated firmware and software which make it easier to upgrade.
SVG-3111 uses a high-performance 34bit CPU. The optimal algorithm is used for compressing
and sending video files. Also, the standard Ethernet network sends video real time.
SVG-3111 is highly safe and convenient for use.
1.2. Basic Function
• Real time MPEG-4 video compression
When the analog video is inputted, the file is compressed in the MPEG-4 format. The MPEG-4 is an
optimal compressing engine that compresses video files to reduce the size of memory. More video
files could be saved when saving from remote areas.
• Stable system operation
Along with the Linux operating system, which is optimal for the embedded system, the hardware
watch-dog is used to enhance the system’s safety. The increase in the safety of the system makes
network service stable.
• User Access Control
The SVG-3111 video server performs an access control check to verify whether the user is
authorized. If the user is not registered, the access to the 4 channel video server is blocked. Only
the user with the administrator right can set the default values and carry out the PTZ motions of the
video server. Users without the administrator right (observer) can only monitor.

1Channel Video Server SVG-3111 Full Manual
9
• IP Filtering
SVG-3111 can block the access from a particular IP address through IP filtering. Only the IP
addresses recognized by the user can access the video server.
• Embedded Motion Detection function
SVG-3111 has an embedded sensor system that detects movements. The user can setup the
motion detection mode on the viewer. The observing areas of motion and sensitivity can be
regulated according to the user’s need. The user can also install various types of sensors
additionally (ex. Heat/shock/alarm sensor etc.), being connected with the video server.
• E-mail and FTP transmission
SVG-3111 sends images to the designated E-mail address or FTP Server when an alarm is raised
or movements are detected. Even when the user is not in the course of monitoring, the system
notifies the situation to the user automatically.
• Easy Firmware Update through Network
SVG-3111 users can easily enhance the functions of the system through network Firmware-Update
without having to pay additional expenses.
• Multi Viewer (16 Channel viewer) Software
In order to maximize the performance of the SVG-3111 video server, a Multi Viewer software is
provided free of charge with other accessories. The software should be installed in a user PC. It is
capable of connecting at most 16 analog cameras and has a set of convenient features such as
presetting, emergency recording and so forth. For example, recording starts automatically according
to the preset time and in case of emergency, it starts with a single click. Also, when playing, you can
fast-forward and fast-reverse at a high speed, which is 32 times faster than the normal playing
speed.
.

1Channel Video Server SVG-3111 Full Manual
10
1.3. Features
Built-in Web Server and Network Interface
No PC Needed for Operation – Standalone Unit
Linux Based Operating System
Motion Detection : Adaptive Detection Level Setting
Monitor live video transmitted in real-time
- Remote monitoring up to 120 fps live video
- SIF ( 352 X 288 ) at 120 fps
- Real MPEG-4
- Low network bandwidth required
Simultaneous video and audio transmission
- Two-way audio
- Voices and background sounds can be monitored over a single connection
Supports network environment
- Ethernet or Fast Ethernet interface
Easy software update from anywhere
- Software/Firmware can be updated remotely using the exclusive application program
E-mail transmissions with attached video clips
- Notifications can be transmitted to the assigned e-mail address and FTP server when
motion is detected or the sensor detects an input signal
- Digital sensor TTL input
- Alarm output
- RS485 interface for Pan, Tilt and Zoom control
- Functions can be setup from a distance using the exclusive applications
-

1Channel Video Server SVG-3111 Full Manual
11
1.4. Packing Contents
NETWORK VIDEO DECODER Cross LAN Cable CD-ROM with manual and
software
DC Adapter(12V/1A) Power Cable
+Terminal Block 2p
Terminal Block 5p
1.5. System Requirements
Operating System : Microsoft Windows® 2000 or Windows® XP
CPU : Intel® Pentium®Ⅳ1.6Ghz or faster
RAM : 512MB or higher
VGA : AGP, Video RAM 64MB or higher
Web Browser : Internet Explorer version 6.0 or higher
Direct-X : 8.x or higher
INPUT Voltage : DC 12V, 1A
Operating Temperature: 0℃~ 50℃(32~122℉)
Humidity: 20~80% RHG, Non-Condensing

1Channel Video Server SVG-3111 Full Manual
12
1.6. System Configuration

1Channel Video Server SVG-3111 Full Manual
13
1.7. Physical Description
1.7.1. Front View
▪SVG-3111 Wireless
1) POWER : Power Supply status displays (Red LED on)
2) LAN: When data is transmitted and received through the LAN port, the LED blinks.
3) OPER: 1Channel Video Server is in operation (Orange LED blinks)
4) Slot for Wireless LAN card

1Channel Video Server SVG-3111 Full Manual
14
1.7.2. Rear View
1) VIDEO IN : 1Vp-p Composite, 1Channel
2) AUDIO IN : MONO Audio Input, 1Channel
3) AUDIO OUT : MONO Audio Output, 1Channel
4) POWER: DC9V/500mA
5) IN/OUT/RS-485 : RJ-45 Ethernet Connector
6) LAN : 1Vp-p Composite, 1Channel
7) RESET : MONO Audio Input & Output, 1Channel
8) RS-232 : 1Vp-p Composite

1Channel Video Server SVG-3111 Full Manual
15
2. Basic Setup of SVG-3111
2.1. Installation
•If you use Network LAN Card in your PC, you can connect the server directly to a PC with a Cross
LAN Cable provided in the package.
• On the assumption that both the user PC and SVG-3111 are used under static IP, and SVG-3111
is directly connected with the user PC or Local Network, the installation procedure is to be:
Picture 2.1 Rear View
1) Connect the Camera to the SVG-3111 Video Server with a Video Cable. (①of [Pic.2.1])
2) In case of using the Pan/Tilt Camera, connect it with RS-485 Port (②of [Pic.2.1])
3) Connect the SVG-3111 Video Server to a PC with a Cross LAN Cable. (③of [Pic.2.1])
②
③
④
①

1Channel Video Server SVG-3111 Full Manual
16
4) Supply power on the Camera and SVG-3111 ( Be sure to use Exclusive Power Adapter -④of
[Pic.2.1])
5) Wait about 2 minutes after power is on the SVG-3111 Video Server. The light on LINK LED
shows that the system is booted successfully.
2.2. Network Setting of a PC
2.2.1. Verifying the network setup status of a user PC
• To connect the SVG-3111 Video Server to the user PC, the network setting of the user PC
must be verified as in the following:
1) Go to ‘Start’ -> ’Settings’ -> ‘Control Panel’, then select ‘Network and Internet Connection’

1Channel Video Server SVG-3111 Full Manual
17
2) Click Local Area Connection
3) Check the properties of Internet Protocol [TCP/IP]

1Channel Video Server SVG-3111 Full Manual
18
Network Setting of User PC
4) Setup IPAddress, Subnet Mask and Gateway in the user PC with 192.168.1.50,
255.255.255.0 and 192.168.1.1 as it is shown in the picture above.
• Caution
- To activate SVG-3111, the user PC must have the same network setup status as it is preset in the
SVG-3111 Video Server. But when you assign the IP address, please be careful not to use the
default IP written on the back side of the video server (192.168.1.10), since the same default IP
address is allotted to all products.
- Basic network setting values of SVG-3111 are:
▶IP Address : 192.168.1.10
▶ Subnet Mask : 255.255.255.0
▶ Gateway : 192.168.1.1

1Channel Video Server SVG-3111 Full Manual
19
• After network setting of a PC, you can verify the network status as following:
1) Go to ’ Start’ -> ‘Run’ ->input ‘cmd’
2) When a DOS window appears as above, input 'ipconfig'.
3) The display shows the current network setting of a PC.
2.2.2. Operation of the Web Viewer (URL 192.168.1.10)
Start a Web Browser
1) Start a Web Browser and input 192.168.1.10 in URL and click ‘Enter’. Then, a user log-in
page appears. In case, it does not open, reset the video server (click the ‘Reset hole’) to
bring it to the default value, and reboot it.
2) When the ActiveX Code for ‘'vg3xview_viewer' pops up, click ‘yes’, then a message window
shows as below.

1Channel Video Server SVG-3111 Full Manual
20
3) Click ‘Install’.
4) When installation of ‘vg3xview_viewer' is completed, the initial Log-in Page appears.
User Log-in Page