SereneLife Safly Fun SLGYMBAR100BL User manual

Questions? Issues?
We are here to help!
Phone: [phone]
Email: [email protected]
WARNING!
Read before using
• Read the user manual thoroughly before using.
• Adult supervision required when assembling the product.
• Adult supervision required when children are using the product.
• Take care not to pinch your ngers and hands during assembly.
• Maximum weight of users of this product should not exceed 90 pounds.
• Only one person at a time can use the product.
• Do not allow children to fold the product after use.
• Only adults should fold and put out of reach of children after use.
• Children should not use it without adult supervision.
• Always check the screws before each use.
• Tighten loose screws immediately.
• Do not use if any parts are that are damaged or loose.
• Do not add, use or replace any parts that are not original.
• Do not use the apparatus for anything other than what it is designed for.
• Use of this equipment is at your own risk.
• Be sure to store it away after use to keep out of reach of children.
www.SereneLifeHome.com www.SereneLifeHome.com
ExpandableSaflyFunGymnasticsBar
Adjustable Height Training Monkey Bar for Kids
Safety Warning
Please read this manual carefully prior to using your new product.
Keep this manual in a safe please for easy future reference.
Parts Summary
The Main Support Poles are shipped with the Height Adjuster Poles
pre-inserted. The Height Adjuster Knobs are screwed into the Main
Support Poles.
Assembled Product Image
Attention!
• DO NOT completely tighten the screws
while assembling the product.
• After you conrm that all parts are correctly
in place, tighten all the screws.
• Prior to using each time, check all the screws
to ensure that they are all tightened.
• Screws may become loose with prolonged
usage. lntermitantly check the screws to
ensure that they secure.
After use, the product folds up for compact
storage (right image).

4. Use the screws to secure
the Main Support Poles
to the Bottom Stabilizer Bars
like the diagram.
Assembly
www.SereneLifeHome.com www.SereneLifeHome.com
1. Insert the Height Adjuster
Poles to the Main Top Bar.
Loosen the knob .
Align the screw holes and
hand tighten the screws on
both sides.
2. Next, fold out the Main Support
Poles like the diagram.
3. Layout and align the Main Support
Poles and Bottom Stabilizer Bars
like the diagram.
6. Finally, adjust the bottom of both Main Support Poles to the point of
where it is just barely above the surface.
5. Insert the assembled Horizontal
Bar and Height Adjuster Pole
unit into the top of the Main
Support Poles . Next, tighten
the Height Adjuster Knob
into a screw groove at the
desired height. (see diagram)
Support Pole
Make sure that the bottom of the adjuster is not
touching the oor surface. It should not be higher
than the Bottom Stabilizer Bars.
If adjusted tightly to the oor it may seem
unstable and rocky. The support pole is like a
fulcrum but when in use, the weight should be
on the outer Bottom Stabilizer Bars so as not
to rock.