VARSITY Scoreboards VSBX-716 User manual

1
OPERATING INSTRUCTIONS FOR
MODEL VSBX-716
www.varsityscoreboards.com

2
Table of Contents
CONTROLLER DEFINITIONS ............................................................................................................................. 3
COMMUNICATION CABLES ................................................................................................................................ 4
Connecting a Hard Wired Ca le ................................................................................................................... 4
Connecting a Wireless Transmitter ............................................................................................................ 4
GETTING STARTED ............................................................................................................................................... 5
A Note a out the LCD Display: ...................................................................................................................... 5
USING THE OPTIONS MENU .............................................................................................................................. 6
CHANGING GAME MODES: ............................................................................................................................. 6
CHANGING GAME SETTINGS (Overview): ............................................................................................... 6
USING THE LCD CONTROLLER TO SCORE SOCCER ................................................................................ 7
USING THE LCD CONTROLLER TO SCORE BASEBALL ........................................................................... 7
END OF GAME/STARTING A NEW GAME .................................................................................................... 8
ADDITIONAL INFORMATION ............................................................................................................................ 9

3
CONTROLLER DEFINITIONS
Before continuing, take a few moments and familiarize yourself with the following terms as they apply
to the controller. They are referenced frequently throughout this manual.
1. POWER Switch:
The POWER switch is used to turn the controller ON and OFF.
2. LCD Display:
The controller’s LCD displays all scoring information and option settings. Even though your scoreboard may not
be equipped to display all scoring information discussed in this manual, all of this information will appear on the
controller’s LCD.
3. CLOCK Controls:
The CLOCK controls are used to set, start, and stop both the game clock and timeout clock. The horn button is
also located in this section of the controller’s keypad.
4. CONTRAST Knob:
The CONTRAST knob is used to change the brightness of the text in the LCD Display.
5. CLOCK Start/Stop Switch:
The CLOCK Start/Stop Switch is used to start and stop the game clock.
6. HOME SCORE Keypad:
The HOME SCORE keypad is used to enter scoring information for the HOME team.
7 . RESET Key:
The RESET key is used to begin a new game. Using this key will clear out the status of an existing game and
reset the scoreboard to the default startup values. When pressed and held for three seconds, the RESET key
clears all scoring information while saving all option settings. This key is also used in combination with the
OPTION key to enter the option menu.
8. NUMERIC Keypad:
The NUMERIC keypad is used to enter values when setting options and editing scoring information. This section
also contains the RESET and UNDO keys.
9. UNDO Key:
The UNDO key is used to undo the last controller entry.
10. GUEST SCORE Keypad:
The GUEST SCORE keypad is used to enter scoring information for the GUEST team.
11. GAME Keypad:
The GAME keypad is used to enter values related to game play.
12. OPTION Key:
Pressing RESET, quickly followed by the OPTION key enters the option menu.
13. ENTER Key:
The ENTER key is used to accept any entry while in the option menu and to continue the last game scored
when the controller is first turned ON.

4
COMMUNICATION CABLES
Connecting a Hard Wired Cable
1. Using the supplied 20-ft. DIN cable, connect one end to either of the DIN sockets on back of
the controller and the other end to the junction box receptacle.
2. Connect the AC Adapter to the power jack on the back of the controller and into a standard
120V power source.
Connecting a Wireless Transmitter
1. Connect the transmitter to the controller by plugging one end of the transmitter’s attached
interface cable into the transmitter and the other end to either of the controller’s DIN sockets
on back of the controller. Place the transmitter into the supplied clip on back of the controller.
2. Connect the AC Adapter to the power jack on the back of the controller and into a standard
120V power source.
Cable Connection
Wireless Connection

5
GETTING STARTED
Begin by making sure the Game Inserts that came with your scoreboard are in the proper location on
the controller, as in the image below.
A Note about the LCD Display:
The LCD display provides the scorer with any information that the scoreboard will display. The
Up/ Down Arrows on the GAME Keypad are used to scroll the information on the LCD Display. There
are two lines of text. Pressing either arrow will cycle those lines of text.
When the POWER switch is turned ON the controller’s LCD will show the following:
To Continue Last Game Press ENTER, To Start New Game Press RESET
Pressing either ENTER or RESET will enter the controller’s game mode selection list. From here, the
operator can begin scoring the game or enter the option menu where the game may be changed and
keyboard options such as contrast and clock functions may be set.
1. Pressing ENTER will recall information from the last game that was played and display it on
the controller and scoreboard. At this time game play can resume.
2. Pressing RESET will begin a new game. The controller will display the default start up
information with no scores, the default time on the clock, and Period will be 1.
3. To access the option menu press RESET quickly followed by OPTION.
NOTE: Shortly after the controller is turned off a single digit on the scoreboard will begin to flash an
“8” and will continue to do so until power to the scoreboard has been shut off at the scoreboard's
power disconnect switch or circuit breaker. This feature serves as a reminder to turn off the power to
the scoreboard after each use. Failure to turn off the power to the scoreboard after use could
increase the chances of equipment failure.

6
USING THE OPTIONS MENU
CHANGING GAME MODES:
Access the option menu by pressing RESET quickly followed by OPTION. Once you have placed
the controller in the Options Menu, the controller’s LCD should display SELECT OPTION on the
top line and <SELECT GAME> on the second line. For this scoreboard, basketball, volleyball, and
wrestling are the available games modes.
•Use either the up or down arrow key to select the game mode you wish to score then press
ENTER.
NOTE: Selecting a sport that your scoreboard model is not intended to score may
cause unpredictable results.
CHANGING GAME SETTINGS (Overview):
Access the option menu by pressing RESET quickly followed by OPTION. Notice the bottom line of
text on the LCD Display. Make sure the controller is in the game mode that you wish to set options
for.
1. At the <SELECT GAME> prompt, press ENTER.
2. Use either the up or down arrow key to select the options that are available.
3. Now, the bottom line on the LCD displays the current game mode. If the settings for the current
game mode are what you want to edit, press ENTER.
4. If you are changing game modes, scroll to the game mode of choice and press ENTER.
The options that are available for the selected game mode are shown on the bottom line of text of the
LCD display.
1. By using the up or down arrows, scroll to the setting you want to change and press ENTER.
2. If the option you are adjusting is time related; such as the game clock, enter the new time with
a four digit entry. Here are two examples;
i. Eight minutes – 0800
ii. Twelve minutes – 1200
3. Other than time related options, to adjust the selected option or to turn on or off the selected
function, use the up and down arrow keys and then press ENTER.
4. To select and set other options follow the steps above until all desired options have been set,
then press OPTION to exit the option menu.

7
USING THE LCD CONTROLLER TO SCORE SOCCER
1. Make sure the Soccer inserts are in the controller. The sport is displayed after the controller is
turned on and the RESET button is pressed. If it is not in Soccer configuration, refer to the
USING THE OPTIONS MENU/CHANGING SPORT CONFIGURATIONS in the using the
options menu...
2. To increase the HOME score by one (1), press the +1 key on the HOME SCORE keypad. To
decrease the HOME score by one (1), press the -1 key on the HOME SCORE keypad.
3. To increase the GUEST score by one (1), press the +1 key on the GUEST SCORE keypad.
To decrease the GUEST score by one (1), press the -1 key on the GUEST SCORE keypad.
4. To register a shot for the HOME team, press the SHOTS key on the HOME SCORE keypad.
5. To register a shot for the GUEST team, press the SHOTS key on the GUEST SCORE keypad.
6. To register a penalty for the HOME team, press the PEN key on the HOME SCORE keypad.
7. To register a penalty for the GUEST team, press the PEN key on the GUEST SCORE keypad.
8. To increase the PERIOD by one (1), press the PERIOD key on the SOCCER keypad.
NOTE: the number of periods may be changed to 1, 2, 3, or 4 by following the procedure below:
1. Enter the options menu by pressing the RESET quickly followed by the OPTION.
2. Use either the up or down arrow key to select <SOCCER PERIODS> then press ENTER.
3. Use the up and down keys to select 1, 2, 3, or 4 periods, and then press ENTER.
4. Press OPTION to exit the options menu.
Even though your scoreboard may not be equipped to display all of the information mentioned, such
as those models that do not display penalties, shots, and goals, this information will appear on the
controller’s LCD display and serves as convenient and accurate way to track these statistics.
USING THE LCD CONTROLLER TO SCORE BASEBALL
1. Make sure the Baseball inserts are in the controller. The sport is displayed after the
controller is turned on and the RESET button is pressed. If it is not in baseball
configuration, refer to the USING THE OPTIONS MENU/CHANGING SPORT
CONFIGURATIONS in the using the options menu.
2. To increase BALL by one press the BALL key.
3. To increase STRIKE by one press the STRIKE key.
4. To increase OUT by one press the OUT key.
5. To clear all balls and strikes for the next batter presses the NEW BAT/AT BAT key. The
controller will ask display the players jersey number or just press the enter key.
6. To increase the INNING by one (1) press the INNING key.
7. To increase the HOME score by one press the + key on the HOME SCORE keypad. To
decrease the HOME score by one press the -1 key on the HOME SCORE keypad.
8. To increase the GUEST score by one press the +1 key on the GUEST SCORE keypad. To
decrease the GUEST score by one press the -1 key on the GUEST SCORE keypad.

8
9. To register a HIT for the HOME team press the HIT key on the HOME SCORE keypad.
10.To register an ERROR for the HOME team press the ERROR key on the HOME SCORE
keypad.
11.To register a HIT for the GUEST team press the HIT key on the GUEST SCORE keypad.
12.To register an ERROR for the GUEST team press the ERROR key on the GUEST SCORE
keypad.
13.To correct a hit/error or inning entry error press the EDIT key quickly followed by the
appropriate key: HIT or ERROR on the appropriate score keypad or the INNING key.
14.At the prompt use the numeric key pad to enter the correct inning or the correct number of
hits or errors the press ENTER. To review the total hits and errors for both teams simply
press either the up or down key while in scoring mode.
15.The total hits and errors screen is automatically updated each time a hit or error is entered
for either team. Even though your scoreboard will not display this information, this function
may still be used as a convenient and accurate way to track these statistics.
END OF GAME/STARTING A NEW GAME
If at the end of a game the scoreboard is to be used to score another game press and hold the
RESET key for three seconds. All scoring information on both the controller’s LCD and the
scoreboard will be cleared, while all option settings will be saved.
After the last game simply turn the controller’s POWER switch OFF. All scoring information and
option settings will be saved and may be retrieved when the controller is turned back on by pressing
ENTER.
Shortly after the controller is turned off the QUARTER digit on the scoreboard will begin to flash
and will continue to do so until power to the scoreboard has been shut off at the scoreboard's power
disconnect switch or circuit breaker.
NOTE: After each use the controller and all accessories should be stored in a secure, dry location.

9
ADDITIONAL INFORMATION
NOTE: AFTER EACH USE POWER TO THE SCOREBOARD MUST BE SHUT OFF AT THE
SCOREBOARD'S POWER DISCONNECT SWITCH OR CIRCUIT BREAKER. FAILURE TO DO SO
WILL RESULT IN UNNECESSARY POWER CONSUMPTION AND MAY SHORTEN THE LIFE OF
THE DISPLAYS AND ELECTRONICS.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his/her own expense.