Seuic AUTOID 7 series User manual

Series

Basic function
Data collection
Wireless communication
1D Scanner
2D Scanner
WIFI
IR
Bluetooth
Catalogue
Appearance introduction
Input method
Charging mode
Use of application center

Basic function

Scanner
RS232
USB1.1
Charge
interface
Hand band install
position
Battery
compartment
High-decibel
speaker
Battery cover
lock
Appearance function
Please fasten
the battery cover
when using

Scan key
Blue function key Orange function
key
Enter
Case switch
Delete key
Power key
Backlight
switch
Definition key
Hard keyboard
introduction
Direction keys
With the blue function key to
adjust the volume and screen
brightness

+ +
Any one of the
side keys
Press the three keys together and then
release. You can restart the machine.
1.Restart :data in RAM is lost, but the install won’t be lost
Hard keyboard introduction
2. Recover the device to default setting:all the programs and data will be cleared except
the data on user’s memory space.
Refer to the guidebook of default setting for details.

The key is an input method switch key, press the orange function key, enter the text input
Before pressing
the orange key
After pressing the
key
After pressing 1
key
After pressing 2
key
3.Use of orange key

Hard keyboard
3、Blue function key usage
The key function is Fn, press blue key and then press 1,run F1.
Use the arrow keys with the left and right key to adjust the volume up and
down keys to adjust the screen
Fn setting ：Click into Set-System, click
Pressing F1 will execute barcode
Scanning can set the hotkey
Blank means no hotkey

Input
1、Input
There are three input
methods,such as keyboard\soft
keyboard\hard keyboard

Battery indicator and charging
1、Indicator
Not full, double click the icon
to display the power
Low power
Charging
2、Charging methods
Full
End plug charging charging time：2-3h
Base charging charging time：2-3h
Portable charger charging time：4-5h

3、Cradle introduction
When the PDA is being charged, PDA’s red light means
charging, green light means full.
When the battery is being charged in cradle compartment,
the middle light will turn the red to green light.
Attention:
1.The three light-emitting diodes in cradle from left to
right are power entry、charging indicator、USB data
connection indicator.
2.When the battery will charge fully, the charging LED
will turn out for a short time.
RS232
USB1.1
Both PDA and battery
charging
Optional BT function

AppCenter
You can set the AppCenter. Default password is " seuic "
Open the AppCenter ( path: Start-Programs- AppCenter )
Enter into
management
setting
Display the opened
software
Enter the
password Modify the
password
Software authority
management Set boot from
the start

Data capture

Settings
Hide the 1D
scanner
Click this will
close the 1D scanner
1D Scanner

Setting barcode type
Suggest not modify
1D Scanner

Set remind mode
Set barcode show
mode
Set run program at startup
1D Scanner

1D Scanner(Red light)

Settings
Hide the 1D
scanner
Click this will
close the 1D scanner
1D Scanner(Red light)

Restore scanner
factory Settings
Setting barcode type
Suggest not modify
1D Scanner(Red light)

Set remind mode
Set barcode show
mode
Set run program at startup
1D Scanner(Red light)