Sheds Direct Ireland SD-XN119-AP User manual

Metal Garden Shed
OWNER'S MANUAL
Instructions for Assembly
Requires two people and takes 2-3 hours for lnstallation.
Quick & Easy Assembly
Ridge Reinforced Walls
Available in Various Sizes
SD-XN119-AP

BEFORE YOU START
Owner's Manual
Prior to installation, it is important that you contact your local government authority to
determine if building approval is required. Study and understand this owner's manual.
Important information and helpful tips will make your construction easier and more
enjoyable.
Assembly instructions
Instructions are supplied in this manual and contain all appropriate information for your
building model. Review all instructions before you begin. During assembly, follow the
step sequence carefully for correct results
Parts
Check to be sure that you have all the necessary parts for the building.
Separate contents of the carton by the part number while reviewing parts list.
Familiarize yourself with the hardware and fasteners for easier use during
construction. These are packaged within the carton. Note that extra fasteners have been
supplied for your convenience.
TOOLS MAY REQUIRED
Use heavy duty gloves when handling steel sheets and flashing
PLAN AHEAD
Watch the weather:
Please be sure the day you select for installation is dry and calm.
DO NOT attempt to assemble your shed in windy weather
because of risk of damage to panels, or personal injury. Be careful
of wet or muddy ground.
Teamwork:
Whenever possible, two or more people should work together to
assemble the building. One person can position parts or panels
while the other is able to handle the fasteners and the tools.

PLAN AHEAD
Site Selection
lAvoid overhanging trees as much as possible as leaves will make regular cleaning
necessary and broken branches are a potential hazard.
lSmall trees,bushes or fences nearby can be helpful,acting as a wind break.
Site Preparation
The site must be prepared so that the base of the shed is level all round and checking
with a spirit level is required.
The base can be constructed by treated timber or concrete,in order to stop the moisture
getting into the shed.The shed is not designed to be built onto lawn directly.Also the
ground will get muddy during rainy days.
If a concrete pad is made,it is important that this slopes towards the edges to prevent
water ingress.
Time must be allowed for any concrete or cement to dry before building the shed on top.
Bases can also be constructed from bricks,blocks,or mounted on a concrete pad.
The bricks or blocks should be cemented onto firm and level concrete footings and the
greenhouse frame drilled and screwed to the base.
IMPORTANT NOTES:
lFind someone to help you:it is much easier with someone to hold parts,pass tools
ect.Also some steps require two people to lift structures together.This is not very
heavy work so would suit most able-bodied people.
lAllow plenty of time:rushing often causes errors and the re-doing of incorrect
assemblies.If you have never built a shed before,it can take most of a day to carefully
complete the construction.
lHave the right tools to hand.
lSafety clothing as recommended in the 'Tools' section.
lIdeally lat out the parts and check that all are present before commencing
construction.Lay on cloths or plastic sheets if there is any risk of scratching the parts.
lTighten all nuts carefully,being sure not to miss any.Check the frame is square and
using a spirit level to check that it is upright.

PART
NO. Qty.
P1
P2
P3
P5
P6
2
2
12
2
2
1820mm
1427mm
1427mm
P8 6
1427mm
1
PART
NO. Qty.
4
2
1
1
1
1
1
1
1
4
1
1
2
2
2
2
3L
3R
4L
4R
5
6
7L
9
11L
11R
12
1586mm
1372mm
798mm
798mm
1820mm
1820mm
1246mm
1304mm
1574mm
1302mm
1302mm
1590.5mm
1590.5mm
356mm
7R 1
1308mm
1308mm
4
2
2
2
2
1
4
2
2
2
2
13
14L
14R
15L
15R
16
17
19
21
21L
21R
1820mm
363mm
363mm
189mm
189mm
1719mm
1399mm
1304mm
1411mm
22
1526mm
4
1
16-1
1719mm
1820mm
1820mm
1
1
660mm
660mm
2
1302mm
15-1
15-2
24-1
24-2
15
1
20
662mm
23
1312mm
2

PART
NO. Qty.
G2 4
2
GF
GD
GB
GC
GE
4
4
4
2
GS 4
F1
F2
F3
S3
PART
NO. Qty.
D1 2
8
S2 300
1810X660mm
F4 30
585
8
65
408

9
22
22
3L
3R
5
P3
P3
P3
9
P3
P3
P3
23
23
22
22
P3
P3
P3
P1
P1
P3
13
13
13
13
6
7L
P3
P3
4R
4L
11L
11R
11L
11R
16-1
16
15L
14L
14R
15R
15R
14R
14L
15L
12
12
21L
21R
21R
21L
P8
P8
P8
P8
P8
P8
20
19
19
P2
P2
15-1
15
24-1
GC
15-2
15
24-2
GC
GC
GC
17
17
GE
GE
17
17
P5
P6
P6
P5
21
21
9
9
1
1
1
1
2
2
7R
D1
D1

1
PART
NO. Qty.
4
2
PART
NO. Qty.
2
F1
x2
1
1
F1
2
2
2
2
1
1
1
1
F1
F1
-7-

PART
NO. Qty.
1
1
3L
3R
1
1
3L
3R
F1
F1
PART
NO. Qty.
1
5
5
F1 F1
1、Wen diagonal measurements are
equal,the frame is square.
2、The Floor Frame must be
BOTH square AND level or the
holes will not line up properly.
-8-

PART
NO. Qty.
P2 1
P1 1
F1
S3
PART
NO. Qty.
22 1
P1
P2
5
-9-
PART
NO. Qty.
1
13
F2
S3
F1
S3
13
5
22
S3 F1
5

PART
NO. Qty.
PART
NO. Qty.
1
13
P3 2
F1
S3
F1
S3
PART
NO. Qty.
22 1
23
S3 F1
5
-10-
P3 P3
13
23 1
22
5

PART
NO. Qty.
F1
S3
5
PART
NO. Qty.
1
13
F1
S3
13
5
PART
NO. Qty.
22 1
S3 F1
22
-11-
P3 2
P3
P3
23 1
23
5

F1
S3
PART
NO. Qty.
1
13
5
F1
S3
PART
NO. Qty.
22 1
S3 F1 F2
S3
-12-
PART
NO. Qty.
P2 1
P1 1
P2
P1
5
13
22 5

PART
NO. Qty.
4
9
F1
x2
9
9
9
9
9
9
S3
F1
PART
NO. Qty.
1
1
4L
4R
4L
4R
F1
S3
F2
S3
-13-
5

x2
GF
GF
PART
NO. Qty.
GF 4
F1 F1 F1 F1
-14-
PART
NO. Qty. PART NO. Qty.
2
2
21L
21R
2
2
14L
14R
2
2
15L
15R
2
12
21L
21R
14L 14R
15R
15L 12
12
14R
21L
x2
F2
S3
F2
S3
F2
PART
NO. Qty.
1
1
6
7L
7R 1
G2 4
G2 x2
7L&7R
5
7L
7R
6
F4
S3

PART
NO. Qty.
2
21
F1
PART
NO. Qty.
2
2
11L
11R
11R
11L
F2
2
P1
P1
F1
S3
x2
-15-
21
21
F1
S3
PART
NO. Qty.
P3 8
P3
P3
P3 P3
P3
P3
P3
P3

PART
NO. Qty.
1
16
1
16-1
F2
16
16-1
F2
12
F2
12
11L
11R
11R
11L
Ⅱ
Ⅱ
F2
F2
Ⅱ
-16-
16
16-1

PART
NO. Qty.
P5
P6
1
1
PART
NO. Qty.
P8 6
F1
S3
P5
P6
F1
S3
F1
S3
P8
P8
P8
P8
P8
P8
PART
NO. Qty.
P5
P6
1
1P6
P5
-17-

x2
F1
F1
GS
GS
F1
GE
17 17
PART
NO. Qty.
2
19
19
20
F1
S3
17
17 17
17
PART
NO. Qty.
4
17
GE 2
GE
GE
-18-
1
20
19
PART
NO. Qty.
1
1
15-1
PART
NO. Qty.
GS 4
1
1
15-2
24-1
24-2

-19-
PART
NO. Qty.
GC 4
GC
GC
GC
GC
17
GC
S3
S3
Ⅱ
Ⅱ
Ⅱ
F1 F1
15-1
15
24-1
15-2
15
24-2
2
15
2
GB
F2
PART
NO. Qty.
GD 4
D1 D1
GD S3 F2
GB
x2
PART
NO. Qty.
2
D1
34
Disassemble NO.34

F3
7L&7R G2
D1 D1
-20-
x2
F1