Sheds Direct Ireland T-PS88-AP User manual

Metal Garden Shed
OWNER'S MANUAL
Instructions for Assembly
Requires two people and takes 2-3 hours for lnstallation.
Quick & Easy Assembly
Ridge Reinforced Walls
Available in Various Sizes
T-PS88-AP

BEFORE YOU START
Owner's Manual
Prior to installation, it is important that you contact your local government authority to
determine if building approval is required. Study and understand this owner's manual.
Important information and helpful tips will make your construction easier and more
enjoyable.
Assembly instructions
Instructions are supplied in this manual and contain all appropriate information for your
building model. Review all instructions before you begin. During assembly, follow the
step sequence carefully for correct results .
.
Parts
TOOLS MAY REQUIRED
Use heavy duty gloves when handling steel sheets and flashing
PLAN AHEAD
Watch the weather:
Please be sure the day you select for installation is dry and calm.
DO NOT attempt to assemble your shed in windy weather
because of risk of damage to panels, or personal injury. Be careful
of wet or muddy ground.
Teamwork:
Whenever possible, two or more people should work together to
assemble the building. One person can position parts or panels
while the other is able to handle the fasteners and the tools.
Check to be sure that you have all the necessary parts for the building.
Separate contents of the carton by the part number while reviewing parts list.
Familiarize yourself with the hardware and fasteners for easier use during
construction. These are packaged within the carton. Note that extra fasteners have been
supplied for your convenience.

PLAN AHEAD
Site Selection
lAvoid overhanging trees as much as possible as leaves will make regular cleaning
necessary and broken branches are a potential hazard.
lSmall trees,bushes or fences nearby can be helpful,acting as a wind break.
Site Preparation
The site must be prepared so that the base of the shed is level all round and checking
with a spirit level is required.
The base can be constructed by treated timber or concrete,in order to stop the moisture
getting into the shed.The shed is not designed to be built onto lawn directly.Also the
ground will get muddy during rainy days.
If a concrete pad is made,it is important that this slopes towards the edges to prevent
water ingress.
Time must be allowed for any concrete or cement to dry before building the shed on top.
Bases can also be constructed from bricks,blocks,or mounted on a concrete pad.
The bricks or blocks should be cemented onto firm and level concrete footings and the
frame drilled and screwed to the base.
IMPORTANT NOTES:
lFind someone to help you:it is much easier with someone to hold parts,pass tools
ect.Also some steps require two people to lift structures together.This is not very
heavy work so would suit most able-bodied people.
lAllow plenty of time:rushing often causes errors and the re-doing of incorrect
assemblies.If you have never built a shed before,it can take most of a day to carefully
complete the construction.
lHave the right tools to hand.
lSafety clothing as recommended in the 'Tools' section.
lIdeally lat out the parts and check that all are present before commencing
construction.Lay on cloths or plastic sheets if there is any risk of scratching the parts.
lTighten all nuts carefully,being sure not to miss any.Check the frame is square and
using a spirit level to check that it is upright.

1
1
14R
16L
16R
19L
19R
13
13-1
1060mm
1080mm
1080mm
291mm
291mm
6
21L
21R
7
2051mm
1820mm
1090mm
1
1
2152mm
PART
NO. Qty.
PART
NO. Qty.
12
1
2
2
3L
3R
5
9
20
11
11-2
12L
14L
2228mm
2228mm
12R
692mm
692mm
1030mm
2216mm
2160mm
696mm
2216mm
1105mm
1105mm
1060mm
222
4L
4R
10
17 11
17-2 2
259mm
1820mm
1820mm
2372mm
2358mm
2372mm
P1
P3
P4
P5
2
3
1
2
1820mm
2
1655mm
P2
23 3
2192mm
P10 15
1820mm
22L
22R
1
1
2
B1
90mm
2
B2
165mm
1
1
1
1
1
1
1
1
2
1
1
1
1655mm
1655mm
P7
P8
3
1
2
834mm
P6
834mm
834mm
1
2
2
1
1
1
1

F4
PART
NO. Qty.
G2 4
2
GD
GB
GC
4
4
GS 2
F1
F2
F3
S3
PART
NO. Qty.
1810X560mm
D1 2
8
S2
500
70
360
360
30

P1
P1
13
13
4L
4R
6
16L
16R
12L
12R
14L
14R
11-2
11
B2
B1
B2
B1
11
22L
21L
22R
21R
GC
GC
GC
GC
17
10
P6
P8
P7
P7
P7
P6
P2
P2
P4
P3
P3
P3
17-2
17-2
1
3R
3L
5
19R
19L
22
22
P5
P5
2
1
7
13-1
13-1 9
P10
20
23
23
23
20
D1
D1
P10
P10
P10
P10 P10
P10
P10
P10
P10
P10
P10
P10
P10
P10

1
PART
NO. Qty.
2
2
1
1
F1 F1
PART
NO. Qty.
1
1
3L
3R
1
1
3L
3R
F1
F1
PART
NO. Qty.
1
5
5
F1 F1
-7-
21

1、When diagonal measurements are
equal,the frame is square.
2、The Floor Frame must be
BOTH square AND level or the
holes will not line up properly.
PART
NO. Qty.
P10 1
P1 1
PART
NO. Qty.
-8-
F1
S3 F1
S3
1
13
P1 P10
13
5
F2
S3
23 1
S3
F1 23
5

S3 F1
-9-
PART
NO. Qty.
1
13-1
P10 2
F1
S3 F1
S3
P10 P10
13-1
PART
NO. Qty.
23 1
23
23
23 F1
PART
NO. Qty.
1
13-1
P10 2
F1
S3 F1
S3
S3
F1
S3
F1
P10
P10
13-1
P10
P10
13-1

-10-
PART
NO. Qty.
23 1
S3
F1
23
23
23 F1
PART
NO. Qty.
P10 1
P1 1
1
13
F1
S3 F1
S3 S3
F1
P1
P10
13
P1
P10
13
F2
S3
PART
NO. Qty.
1
9
S3
F1
9

PART
NO. Qty.
1
20
20
21R&22R
S3
F1
S3
F1
20
-11-
PART
NO. Qty.
21L&21R 1
1
22L&22R x2
x2
B2
F2
F2
21L&21R
22L&22R
2
B1
2
B2
B1
PART
NO. Qty.
1
20
21L&22L

PART
NO. Qty.
1
1
4L
4R
4L
4R
S3
F1
-12-
S3
F2
PART
NO. Qty.
71
61
S3
F1
G2X4
7
G2 47
6
1
1
16R
19R
PART
NO. Qty.
F1
19R
16R

1
1
16L
19L
PART
NO. Qty.
PART
NO. Qty.
P5 2
P5
P5
F1
F1
F1
F1
-13-
16L
19L

F1
F1
PART
NO. Qty.
114R
1
1
12L
14L
12R 1
F1
14R
12R
19R
F1
F1
14L
12L
19L
F1
PART
NO. Qty.
22
222
PART
NO. Qty.
11 2
F1
F1
S3
S3
-14-
F1 S3
11

-15-
PART
NO. Qty.
11-2 1
F1
F2
PART
NO. Qty.
P10 9
P10 P10
P10
P10
P10
F1
S3
S3
F1
P10 P10 P10
P10
PART
NO. Qty.
P4 1
1
P2
P2
P4
P4
P2
F1
S3
11-2

-16-
P3
P3
P3
P2
PART
NO. Qty.
P3 3
1
P2
P3
P3
P6
P8
PART
NO. Qty.
P8 1
1
P6
P8
P6
PART
NO. Qty.
P7 3
1
P6
F1
S3
F1
S3
P7
P6
P7
P7
P7
P7

PART
NO. Qty.
17 11
17-2 2
GC 4
10
17
17-2
17-2
GC
GC GC
GC
F1
F1
F1
F1
S3
PART
NO. Qty.
GS 2
1
10
GS
GS
10
F1
F1
-17-

-18-
2
GB
F2
PART
NO. Qty.
GD 4
D1 D1
GD S3 F2
GB
x2
PART
NO. Qty.
2
D1
34
x2
F1
Remove part 34

F3
31
7G2
F3
31
7G2
D1 D1
-19-

W1
W1
W3
W3
W3
W3
W2
W2
W2
W2
W2
W2
PART
NO. Qty.
2
W1
6
4
W2
W3
2189mm
1543mm
659mm
20
F1
- 20 -