Shiels AcTIVE Pro Call+ User manual

Notice for Use
Please fully charge before using. The charging time needed is about 2 hours.
Please use the cable provided for charging to avoid damaging the watch.
When measuring, make sure the sensor is close to the skin and hold still.
Product measurement results are only used for reference instead of medical
purposes.
Charging diagram
Align the two contacts of the charger to the charging position on the back of the
watch and connect the other end to the standard USB interface to charge.

APP Installation & Connection
Scan the QR code or enter the APP Store and search for "Vband" in the App Store to
download and install the APP
Scan for iOS Scan for Play Store App
Note: Android supports 5.0 and above, IOS supports 8.0 and above.
Bluetooth hardware 4.0 and above.
Device connection
Connect the watch using Bluetooth, search for the device ‘U68’ in the list. If there
are too many devices to select from, find the MAC address of the watch to be
connected. On successfully connecting the watch to the mobile device, the status on
the V band app under device will show connected and the battery level. (Note:
Before using the Bluetooth function, please confirm whether the mobile’s
Bluetooth is turned on)
For audio connection, turn on the Bluetooth of the watch and search for
‘U68-Audio’in the list of devices and connect.
Please allow all notification permissions such as reading, contact information and
allowing the app to run in background in the phone settings.

Watch function description
Side button: press and hold for 3 seconds to turn on and off; short press any button
on any page to return to the dial; short press to turn off the screen on the dial page.
Swipe up to enter a message notification.
Swipe down to enter the shortcut menu. (Turn on Bluetooth for U68-Audio here)
Swipe left to enter the menu interface.
Slide the dial interface to the right to enter the audio interface.
Press and hold for 3 seconds to select different dial pads.
Features
Change faces
On main screen, touch the screen to browse the faces.

Bluetooth display
Enter the number on the dial interface of the watch or mobile phone to enter the dial.
The watch and mobile phone will be synchronized in real time.
Bluetooth call
This watch supports Bluetooth call.
Address book
Click the sync address book on the APP side, and the watch can import 1000
contacts.
Sports record
Displays the current number of exercise steps, exercise mileage and calorie
consumption.
Intelligent voice
Using Bluetooth connection, you can control the mobile phone using voice.
Heart rate
Measure the current heart rate value and display the measurement result.
blood pressure
Measure the current blood pressure value and display the measurement result.
Blood oxygen
Measure the current blood oxygen value and display the measurement result.
Sleep
It can record and display the total length of sleep, and the length of deep sleep
and light sleep. For more detailed information analysis and data recording, you
can log in to the APP to view. Note: Sleep data starts to detect sleep from 9pm.

Sport mode
The sport mode menu supports a total of six sport modes: walking, running,
yoga, elliptical machine, mountaineering, and swimming. The sport time and
calories are recorded on each mode interface. Click to enter and right to exit.
Bluetooth music
After connecting the mobile phone Bluetooth, click to control the previous song,
next song, play, pause and other operations of the phone.
Message notification
On the V Band app, set notification alerts for the apps required and the read the
content of the message on your watch.
Find phone
When the watch is connected to the APP, tap find the phone, and the phone will
ring.
Set up
Volume adjustment, screen brightness, factory reset, shutdown, version number.
More features
Weather, calculator, alarm clock, stopwatch, remote photography, sedentary
reminder, drinking water reminder, charging reminder, etc.
【APP introduction】
1. User registration: Users can be registered by mobile phone number and email
address, which is convenient for users to record and share sports and health

information content. For unregistered temporary users, they cannot record and
save related information.
2. Connect the watch: In Add Device, search for the device, click and pair the watch.
Note: If you cannot find the name of the watch device, please check whether the
watch is powered on and turned on. If the watch is turned on, but you cannot find
the device, it means that the watch is connected to other mobile phones, then
reset the watch and try pairing the watch to the new mobile phone normally.
3. Step counting function: In the step menu in the APP, the step count, calories,
mileage, and the percentage of completion can be displayed according to the set
target step count, which can be distinguished from jogging, fast running, etc. You
can view the daily history of each week and month.
4. Sleep function: display the daily, weekly, and monthly sleep data in the form of a
graph, and calculate the daily sleep quality and sleep duration, as well as query
historical records.
5. Training function: It can facilitate real-time training, record exercise steps, time,
calories, mileage, and movement track, and can show historical training records.
6. Detection function: The detection menu in the APP includes heart rate, blood
oxygen, and blood pressure detection. At the same time, the test result will be
displayed synchronously in the APP and saved when viewing historical records.
7. Firmware: If there is an update for the APP or watch firmware, the APP will
automatically send an upgrade reminder, or you can manually run the update
from the menu.

Precautions for use
No soaking, diving, or bathing.
This product is an electronic monitoring product, not for medical reference, the
data is for reference only.
Please use factory reset with caution.
Restoring factory settings will result in the loss of all APP content settings and
historical data of the watch.