Shop fox SHOP FOX W1680 User manual

Model W1680 Machine Specifications, Page 1 of 3
MODEL W1680
1 HP 17" FLOOR MODEL DRILL PRESS
Product Dimensions
Weight.......................................................................................................... 270 lbs.
Width (side-to-side) x Depth (front-to-back) x Height........................................ 14 x 24 x 64 in.
Footprint (Length x Width)......................................................................... 22-1/2 x 11 in.
Shipping Dimensions
Type.................................................................................................... Cardboard Box
Content........................................................................................................ Machine
Weight.......................................................................................................... 185 lbs.
Length x Width x Height........................................................................... 21 x 56 x 11 in.
Electrical
Power Requirement.................................................................... 110V, Single-Phase, 60 Hz
Prewired Voltage................................................................................................. 110V
Full-Load Current Rating......................................................................................... 10A
Minimum Circuit Size............................................................................................. 15A
Connection Type......................................................................................... Cord & Plug
Power Cord Included.............................................................................................. Yes
Power Cord Length.......................................................................................... 8-1/2 ft.
Power Cord Gauge............................................................................................ 16 AWG
Plug Included....................................................................................................... Yes
Included Plug Type............................................................................................... 5-15
Switch Type............................................................. Toggle Safety Switch w/Removable Key
Motors
Main
Type......................................................................... TEFC Capacitor-Start Induction
Horsepower................................................................................................. 1 HP
Phase.............................................................................................. Single-Phase
Amps.......................................................................................................... 10A
Speed.................................................................................................. 1725 RPM
Power Transfer ................................................................................... V-Belt Drive
Bearings............................................................... Shielded & Permanently Lubricated
Main Specifications
Construction
Table............................................................................. Precision-Ground Cast Iron
Spindle Housing....................................................................................... Cast Iron
Column..................................................................................................... Steel
Head.................................................................................................... Cast Iron
Base.................................................................................................... Cast Iron
Paint..................................................................................................... Enamel

Model W1680 Machine Specifications, Page 2 of 3
Head Information
Head Swivel........................................................................................... 360 deg.
Other Related Information
Base Length............................................................................................... 18 in.
Base Width................................................................................................ 11 in.
Quill Diameter........................................................................................ 2.040 in.
Depth Stop Type......................................................... Threaded Rod with Positive Stop
Column Diameter..................................................................................... 3.150 in.
Mobile Base............................................................................................. D2057A
Has Work Light.............................................................................................. Yes
Light Socket Type............................................................................. 110V, Std Bulb
Maximum Bulb Wattage.................................................................................. 60 W
Spindle Information
Spindle Taper.............................................................................................. MT#3
Spindle Travel........................................................................................ 3-1/4 in.
Distance From Spindle To Column................................................................. 8-1/2 in.
Distance From Spindle To Table.................................................................. 31-1/2 in.
Distance From Spindle To Base................................................................... 31-1/2 in.
Table Information
Table Diameter........................................................................................... 14 in.
Table Thickness....................................................................................... 1-1/2 in.
Floor To Table Height........................................................................ 24 – 45-1/2 in.
Vertical Table Movement......................................................... Crank Handle Operation
Table Swing............................................................................................ 360 deg.
Max Table Tilt (Left/Right)........................................................................... 90 deg.
Table Swivel Around Center........................................................................ 360 deg.
Table Swivel Around Column....................................................................... 360 deg.
Maximum Movement Of Work Table............................................................. 21-1/2 in.
Number of T Slots............................................................................................. 6
T Slot Width............................................................................................. 1/2 in.
T Slot Length............................................................................................... 6 in.
Operation Information
Type......................................................................................................... Floor
Swing....................................................................................................... 17 in.
Drilling Capacity (Mild Steel).................................................................. 1 in. in Steel
Number of Spindle Speeds.................................................................................. 12
Range of Spindle Speeds..................................................................... 150 – 3050 RPM
Drill Chuck Type............................................................................... JT3 Key Chuck
Drill Chuck Size................................................................................. 1/16 – 5/8 in.
Other
Country Of Origin ............................................................................................... China
Warranty ....................................................................................................... 2 Years
Approximate Assembly & Setup Time ................................................................. 45 Minutes
Serial Number Location .......................................................................... ID Label on Head
ISO 9001 Factory ................................................................................................... No
CSA Certified ....................................................................................................... No

Model W1680 Machine Specifications, Page 3 of 3
Features
Threaded Depth Stop
Crank Handle Operated Rack and Pinion Vertical Table Movement
Includes Built-in Light
Table and Base are Cast Iron
1HP Motor
12 Speeds
Huge 4-3/4" Spindle Travel
Cushioned Grip Quill Handles
1/16"-5/8" Drill Chuck