Shoremaster On-Deck Slide Instruction Manual

Phone: [phone]
Fax: [phone]
www.shoremaster.com
On-Deck Slide:
Instructions and Safety Tips
CAUTION - PUT SAFETY FIRST
Before attempting to install or use this slide, study and fully understand the proper operating
procedures and safety precautions outlined in this owner's manual.
NOT COMPLYING WITH THE PROCEDURES AND PRECAUTIONS OUTLINED IN THIS
MANUAL WILL INVALIDATE THE WARRANTY AND MAY RESULT IN PERSONAL INJURY OR
DEATH.
If you have any questions about assembly, installation, use or suitability of this product, contact
an authorized dealer or ShoreMaster directly at 1-800-328-8945.
1.
2.
3.
1

3/22/2007 SLIDE ON DECK EXP.idw
Slide - On Deck Parts List P/N: 430006230 (Yellow) 430009800 (Tan)
DESCRIPTIONPART NUMBERQTYITEM
PIVOT WELDMENT SLIDE23000653011
POLY SLIDELINDSLIDE
12
LADDER BASE DECK MOUNT2300658013
LADDER WELDMENT SLIDE ON-DECK
23000804014
.250 X 6.0 PLATE DECK MOUNT0050065701
5
BOLT BAG SLIDE ON DECKWSBB0000216
BOLT 3/8 - 16 X 1.250 SSMS380114B
26.1
Washer Flat 3/8" Stainless SteelS380WASHR46.2
WASHER LOCK .25" SSS380LWSHR
26.3
NUT 3/8 - 16 BRASSB380RGNUT26.4
BOLT 1/4 X 1.25 SSMS140114B26.5
WASHER FLAT 1/4 SSS140WASHR
46.6
WASHER LOCK .25" SSS140LWSHR26.7
1-4 -20 NUT BRASSB140RGNUT
26.8
Screw 1/4-20 x 3/4 self threading pan SS50001741666.9
BLUE CAP 21 - 1.9 DIAMETERBLUECAP21
26.10
#1 BLUE CAPBLUECAP20
26.11
5
6.9
2
6.11
6.1
6.2
6.3
6.4
3
4
6.10
6.8
6.7
6.6
6.5
1
SLIDE - ON DECK

DETAIL ADETAIL A
A
STEP 1
Attach the Poly Slide to the Slide Ladder with two Bolts 1/4 x
1.25, four Washer Flat 1/4, two Washers Lock 1/4 and two Nuts
Brass - as shown in Detail "A."
Slide one Blue Cap 21 on each side of the Slide Pivot - as
shown in Detail "A."
STEP 2
Due to the varying dock systems that the Slide could be
attached to, mounting hardware is not supplied, but
needs to be determined and provided by the installer.
Secure all of the decking sections, that the slide connects
to, to the dock frame.
Lay the Deck Mount Plate flush with the end of the dock
and make a mark on the dock at each corner hole.
Move the plate and drill a 7/16" hole at each mark - as
shown.
Secure Deck Mount Plate to dock with 3/8" diameter
hardware in four places.
CAUTION
The Deck Mount Plate must be flush with the Edge of
the dock and secured with four connection bolts and
locking hardware(lock nuts, lock washers, etc.), not
provided. Failure to do so could results in serious injury
or death.
Bolt Holes are sized for 3/8
diameter Bolts. Four bolts are
needed to connect the Deck
Mount Plate to the Dock
Deck Mount Plate
Blue Cap 21
Bolt 1/4 x 1.25
Washer Flat 1/4
Washer Flat 1/4
Nut 1/4 Brass
Slide Pivot
Poly Slide
Slide Ladder
3

DETAIL ADETAIL A
DETAIL BDETAIL B
A
B
111"
STEP 3
Slide one Blue Cap 20 on each end of the Slide Ladder Base - as shown in
Detail "A."
Measure 111" from the Deck mount Plate and make a mark on the dock - as
shown in Detail "B."
Lay the Slide Ladder Base flush with the mark and in line with the Deck Mount
Plate. Make a mark on the dock at each hole. Move the base and drill a 7/16"
hole at each mark - as shown.
Secure Slide Ladder Base to dock with 3/8" diameter hardware in four places.
Slide Ladder Base
Deck Mount Plate
Slide Ladder Mount
Blue Cap 20
STEP 4
Attach the Slide Ladder to the Slide Ladder Base with two
Bolts 3/8 x 1.25, four Washers Flat 3/8, two Washers Lock
3/8, and two Nuts 3/8 Brass - as shown in Detail "A."
Attach the Poly Slide to the Deck Mount Plate with six Pan
Screws 1/4 x .75 - as shown in Detail "B"
CAUTION
Secure with four connection bolts and
locking hardware(lock nuts, lock washers,
etc.), not provided. Failure to do so could
results in serious injury or death.
Poly Slide
Deck Mount Plate
Pan Screw
1/4 x .75
4