SIBER PREMIUM DF EVO User manual

Installation Manual
SIBER DF

1 DELIVERY 3
1.1 CONTENTS OF THE DELIVERY 3
1.2 OPTIONAL ACCESSORIES FOR SIBER DF EVO 4
2 APPLICATION 5
3 MODEL 6
3.1 TECHNICAL SPECIFICATIONS 6
3.2. CHARACTERISTIC CURVES 7
3.3 CONNECTIONS AND DIMENSIONS 9
3.4 EXPLODED VIEW OF THE UNIT 10
4 OPERATION 11
4.1 DESCRIPTION 11
4.2 BY-PASS CONDITIONS 11
4.3 ANTI-ICE SECURITY 11
5 INSTALLATION 12
5.1 GENERALALITIES 12
5.2 POSITION OF THE UNIT 12
5.3 CEILING MOUNTING 13
5.4 WALL MOUNTING 15
6 NOZZLE ORIENTATION 17
7 CONNECTION OF THE CONDENSATE DRAIN 19
8 CHANGE OF FILTERS 20
9 ELECTRICAL CONNECTION (Only for the PREMIUM rangeof Siber DF EVO ) 21
9.1 MAINS CONNECTION 21
10 MONITOR YOUR HOME -PROBES / WIRELESS CONTROLS 23
11 SMART CONNECTIVITY 24
11.1 MODBUS - RS485 24
11.2 KNX -EVO CONNECT 24
11.3 BRIDGE ETHERNET -SIBER EVO APP 25
12. MAINTENANCE 26
12.1 FILTER MAINTENANCE (FOR THE USER) 26
12.2 MAINTENANCE OF THE HEAT EXCHANGE (FOR THE INSTALLER) 27
12.3 EXPLODED VIEW AND DESCRIPTION 29
CERTIFICATE OF GUARANTEE 30
SUMMARY

I 3
1 DELIVERY
1.1 CONTENTS OF THE DELIVERY
Before starting the installation of the Dual Flow VMC Unit with Thermal Energy Recovery, you should check whether it has been
delivered complete and intact.
The delivery content of the VMC DF SIBER DF EVO 1/2 unit consists of the following items:
1. VMC DF unit with Thermal Energy Recovery SIBER DF EVO 1/2/ SIBER DF EVO 1/2 Enthalpic
2. Installation Manual
3. Eco design label
4. Installation guides
5. Bag with silentblocks and screws
* If the Unit has been delivered with any visible defects, such as dents or scratches, or if all the items and accessories listed above are
not included, please contact your supplier.
SIBER DF
Unit supplied without regulating control [see section 1.2 for optional accessories]
The use of this Unit is not authorised for persons, including minors, with reduced intellectual capacities, limited physical
capacities, or lack of experience and necessary knowledge, unless they are under the supervision of, or have been
instructed by a person responsible for their safety, in the use of the Unit.
In any case, children should be monitored to ensure that they do not play with the Unit.

I 4
SIBER DF / INSTALLATION MANUAL
DESCRIPTION IMAGE CODE
G4 FILTER COARSE 65% DFFG4
F7 FILTER ePM1 55% DFFF7
G4 + F7 FILTER COARSE 65% - ePM1 55% DFFG4F7
CARBON FILTER DFFCA
F9 FILTER ePM1 80% DFFF9
G4 + F9 FILTER COARSE 65% - ePM1 80% DFFG4F9
Wireless 4-position pushbutton control DFPULS4B
Wireless smart multi-control DFEVOCTRL
Wireless smart humidity sensor DFEVOHR
Wireless smart CO2 sensor DFEVOCO2
RF -Ethernet communication gateway DFEVORFETH
RF -RS485 Communication Gateway DFEVORFRS485
Connect Modbus master KNX converter DFEVOCONNECT
Siber EVO APP
Smart monitoring of equipment and indoor air
quality
Connectivity via
Ethernet gateway
(DFEVORFETH)
1.2 OPTIONAL ACCESSORIES FOR SIBER DF EVO

I 5
2 APPLICATION
The SIBER DF EVO 1/2 is a Double Flow Controlled Mechanical Ventilation Unit with a Thermal Energy Recovery Unit with an efficiency
of up to 95%, a maximum ventilation capacity of 150 m3/h for the SIBER DF EVO 1 and a maximum capacity of 200 m3/h for the SIBER DF
EVO 2; with low energy consumption fans for both units.
Characteristics of the SIBER DF EVO 1/2 unit:
• Continuous regulation of air flows by means of the control panel.
• Presence of a filter status indicator on the Unit and the possibility of filter status indication on the position selector.
• New smart anti-icing regulation ensures that the unit continues to operate optimally even at low temperatures. If necessary,
switch on the pre-heating battery(optional accessory).
• Low noise level.
• Equipped as standard with a by-pass valve with automatic operation.
• Constant flow regulation.
• Energy saving.
• High Performance.
The SIBER DF EVO 1/2 is available in 2 versions:
• SIBER DF EVO 1/2
• SIBER DF EVO 1/2 Enthalpic
These installation instructions apply to both the SIBER DF EVO 1/2 and the SIBER DF EVO 1/2 Enthalpic.
The SIBER DF EVO 1/2 can be wall or ceiling mounted, with the standard fixing brackets included. For the correct position of the duct
connections and their dimensions [see section 3.3].
The factory unit will come with the right-hand version, which can be changed in one simple step [see section 3.3].
Important! For the correct efficiency of the ventilation system, it is recommended not to disconnect the unit,
except for maintenance