
Product Features
Connection Diagram
Front Panel
①Fuse Holder
1 fuses inside
② AC Input
AC power input
③AC Power Indicator
When the AC power supply is connected and the output is good, the green light is on
When there is no AC power signal, no indicator light
④DC Power Indicator
When the DC power supply is connected and the output is good, the green light is on
When there is no DC power signal, no indicator light
⑤DC Input
5.5mm x 2.5mm DC 12V DC power input port (can be connected to Silent Angel F2 linear
power supply)
⑥Grounding Port
Connect to grounding box
⑦Clock Output Port 1
The output frequency is 10MHz
⑧Clock Output Port 2
The output frequency is 10MHz
⑨Clock Output Port 3
The output frequency is 25MHz
⑩Clock Output Port 4
The output frequency is 25MHz
Four clock outputs: Four digital clock outputs.
Gold-plated ports: Premium gold-plated housing ports enhance transmission quality.
Two different frequency: Two 10MHz outputs and two 25MHz outputs.
* When both DC and AC power are connected,the DC power input will be used and
the DC power indicator lights up
GX
Grounding Box
Rear Panel
①
② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩
Bottom
AC INPUT LED POWER
ONOFF 1 2 3 4 5 6 7 8
POWER
SOURCE
EXTERNAL
12V DC INPUT
DC PLUG TYPE
5.5 mm x 2.5 mm
GROUND WORD CLOCK
25MHz
CLOCK
SELECTOR
INTERNAL
CLOCK
FUSE TYPE: T1A 250VAC
For continued protection against risk of fire,
replace ONLY with fuse of the specified type
and current ratings.
AC INPUT POWER
SOURCE
EXTERNAL
12V DC INPUT
DC PLUG TYPE
5.5 mm x 2.5 mm
GROUND WORD CLOCK OUTPUT 10MHz WORD CLOCK OUTPUT 25MHz
Z1 Plus
N8 Pro-CLK
AC INPUT FUSE TYPE: T1A 250VAC
POWER
SOURCE
EXTERNAL
12VDC INPUT
DC PLUG TYPE
5.5 x 2.5 mm
GROUND
WORD CLOCK
10MHz CLOCK
SELECTOR
INTERNAL
CLOCK
LED POWER
ON
OFF 1 2 3 4 5 6 7 8
For continued protection against risk of fire,
replace ONLY with fuse of the specified type
and current ratings.
AC Outlet
Power Cord
F2 NX