
In detail
hello@silentdiscoking.com • silentdiscoking.com • @silentdiscoking
a b c
d
a
d
b
e
c
f
Channel button
Changes the channel you’re
transmitting to.
Mini-USB input
Insert mini-USB to charge the
device.
Power button
Switches the receiver on and
off.
Volume button
Use “+” or “-” to adjust audio
input volume.
Aux 3.5mm jack input
Input for headphones or
speakers.
Belt clip
Allows you to attach to your
belt for portability.
Troubleshooting
No Audio?
• Check your audio device is working, connected correctly,
playing music with the volume turned up full.
• Ensure the receivers/headphones are switched on, synced
to correct channel and have the volume turned up.
• Try a different device and audio cable.
No Power?
• Check that the batteries are inserted correctly and hold
charge.
Signal cuts out, interference or reduced
range?
• Set up one channel at a time, the colour of the LED on the
receiver matches the channel on the transmitter.
• Ensure there is no interference caused by other wireless
equipment in the vicinity.
• If using two or more transmitters simultaneously, make
sure each is on different channels (frequencies). You
cannot use two transmitters on the same channel in the
same place as they will cancel each other out.
• Make sure the transmitter is in range of the headphones.
Something not working? Visit silentdiscoking.com/help or call our 24/7 support line 0207 0603 653
e
f