Silver Creation BulletHD User manual

Welcome
Thanks for purchasing BulletHD-ADVENTURE Wearable Sports Camcorder.
The world’s first wearable camcorder with 12.0 Mega Pixels camera! With our
customized mounts in box are ideally suited for mounting to yoke in motorbike,
airplanes, golf carts, vehicle, bicycles and many other round and square rail
applications, or any flat surface you can imagine! Aluminum Armored Body -
Even any tough situation and severe weather can’t stop your recording! It’s
also shock, vibration and water resistant.
What’s in the box?
●Camcorder ●Double Socket Arm
●Zinc U-Bolt Mount ●Battery
●Rotating Flat Surface Mount ●Hand Safety Strap
●Adhesive Mount ×2 ●Charger
●Mount Adapter ●USBCable
●Arm ●User Manual
CAMERA OVERVIEW
INITIAL SET UP
1. Make sure the camera is OFF before adding or removing the memory card!
2. Screw out the rear cap (open) located at the back of the camera .
3. Install a Micro SD memory card (max up to 32GB) into the rear slot. To insert the micro SD card,
slide the micro SD card into the card slot on the back of the camera with the card label facing
down. The SD card will click into place once it is inserted past flush with the camera. Use your
fingernail to do this. Then screw in the rear cap till is complete lock.
4. If “no” SD Memory card is inserted into the camera, a Red/Green LED light on top of the c amera
will blink.
5. The Micro SD memory cards must be clean (no images from other sources). If you are using the
Micro SD memory card from other cameras, please make sure to format the SD memory card in your

computer prior to use in the camera. Newcardsaregoodtousestraightfromthepackage.
Charging the battery:
Screw out the rear cap located at the rear of the camera ③ and Plug the USB charger to the
camera. The blue light is on while charging, goes off when the battery is fully charged. On the first
use charge the battery 10 hours before use! You can record up to 125 minutes with one charge.
Power on/off your BulletHD -ADVENTURE
Press and hold the POWER/Shutter button for 2 seconds for power on, the green led will turn on and
the red led will flashes twice, then comes to standby mode.
Take a Video
Turn on the camera and press the Power/Shutter button quick to start video recording. The red led
will blink and you can hear a sound.
Press the same button to stop recording.
To confirm the camera is in video mode, Screw out the rear cap , and the video/photo switch “”
must be to right for video recording standby mode.
Take Snapshot Photos
Screw out the rear cap , switch “” to left for photo standby mode, close the cap.
Turn on camera by pressing POWER/Shooter button for 2 seconds. The green led will be on and the
red led will flash 2 times, then comes to standby mode. Press the shutter button to start taking
photos (red led will blink). Press the shooter button “” again to stop. In this mode the camera will
take sequential photos every 3 seconds until the battery die or the Micro SD card is full.
Remember to place an optional MicroSD card before your recordings!
BulletHD –ADVENTURE is NOT available for Water Sports.

Date & Time Setting
Install the CD driver to your computer! Make sure the MicroSD card is in the Bullet HD, then connect
to PC. Blue light will turn on, then switch on the camera.
Back to your PC screen, there should be a window to show the BulletHD -ADVENTURE is
connected with your PC. Now open the “Date & Time setting Tool” file, double click on “time”. That’s
now synced with your PC! Now you can take a photo or video to test it!
Playback on you computer
Power off the BulletHD -ADVENTURE! Screw the rear cap , connect with your computer via USB
cable from the USB port ,then turn on the device! The driver would be automatically installed.
Or you can take out the MicroSD card and use your own card reader to connect with your computer
too.
The device must be power on while connecting with computer for data
download. Don’t remove the battery!
Watching video at the same time may cause unexpected consequence!
REMARKS: THE SPECIFICATION IS SUBJECT TO CHANGE WITHOUT NOTICE.
Product size: 90 x 30 x 30 mm
Weight: 83g
Operating System:
Compatibility: Win ME, 2000, XP, Vista; Mac OS X 10.6+

Technical specifications for BulletHD -ADVENTURE:
Model : Bullet HD -ADVENTURE
Optics:
•170 degree -FISHEYE view at 720p resolutions
•f/2.8, fixed focus glass lens
Video:
•HD Resolution Settings: 720p: 1280x 720, 30fps
•Sensor Type: 1 / 2.5” HD CMOS
•Light Sensitivity: 1.4 V/lux-sec (550nm)
•Video Format: MPEG codec, .AVI file format
•Exposure Control : Auto / center weighted / spot
•White Balance: Auto
Audio:
•Mono, 48 kHz, AAC compression, built-in microphone
Photo:
•Resolution: 4032 x 3024
•Camera: 12.0 Mega Pixels
•Format: JPEG
•Capture mode: Auto snapshot every 3 seconds
Storage:
• Memory: Micro SD card, support Max upto 32GB capacity
(recommendedClass4orabove)
• Avg. Record Time: 10~15min/GB
Mounts & Accessories Description
Zinc U-Bolt Mount
Zinc U-Bolt Mount in box is ideally suited for several versions of
handlebar kits. BulletHD can be quickly and securely mounted.
Designed for rugged outdoor use, ideal accessory for mountain bike,
motorbike, golf carts, and many other round rail applications.
Rotating Flat Surface Mount
Rotating Flat Surface Mount holds BulletHD securely. Solutions provided
for motorcycles, aeroplanes, or any flat surface you can think of. Holds
BulletHD steady all day long, yet you can easily remove the unit for safe
keeping at the end of the day.

Adhesive Mount
Adhesive Mount for Rotating Flat Surface Mount.
Adaptor
The adaptor connects directly to the arm and contains a female 1/4"-20
threaded steel stud that will connect to any standard male thread. Holds
the BulletHD in place even on fast, bumpy trails. Fits on and does not
slip, slide or move.
Arm
This arm contains a male 1/4"-20 threaded steel stud which matches
with the above adaptor. The metal ball allows you to shoot at any
angle, the round base with rubber surface provides support and stability
for your recording too!
Double Socket Arm
Double socket arm allows for almost infinite adjustment and perfect
viewing angles. This will help to protect BulletHD by dampening shock
and vibration. Allows for almost infinite adjustment and perfect viewing
angles.
More options…
360 Mount for Handlebar / Vented Helmet
Fit with any standard 29mm handle bar with a 360 degree rotation! You
can record at any angle with your Bullet HD Wearable Sports Camcorder.
Besides, there is adjustable silicon strap fix with any kind of vented
helmets. With your Bullet HD, allow you to shoot any anger you want to!
Strap Mount for Non-vented Helmet / Goggle
Together with adjustable silicon straps to fix with any kind of non-vented
helmets. You can use this mount with your goggle too! Slide your goggle
strap into the customized mount, Goggle Strap with width below 40mm is
compatible!
Universal Mount
It has a “female” ¼"-20 screw on the bottom to fix with any mounts or
tripods that have their own “male” ¼”-20 screw. Compatible with the
adjustable silicon straps or magic tape.

Camcorder Mount Adapter
This mount holds the BulletHD in place and with a 360 degree rotation.
This mount is compatible with the strap mount and universal mount.
Adjustable Silicon Straps
Comes with 2 pieces of flexible & strong adjustable silicon straps.
Compatible with both strap mount & universal mount, allow you to fix and
quick release in anywhere you can think of. You can join 2 silicon
straps together to mount to any helmet.
Magic Tape
Use with both strap mount & universal mount. Allows you to fix with your own
chest harness or your arms to get a lower view of actions below eyes sign
level. Make it easy to capture videos and photos even more to any surface.
You can DIY in your own way and cut off the extra length if you want to!
Travel Case
This durable case with belt loop & Carabineer let you never forget where to
put with your gear bag. Pack your BulletHD, MicroSD cards, USB cable,
an extra battery, and mounts with you where ever you go or leave at home,
in order not to lose them.
Windshield Mount
With strong and powerful suction pad allows your Bullet HD Wearable
Camcorder to stick with any windshield. Based by a multi position metal
ball, you can shoot at any anger at 720 degree. You can attach to any flat
surface of car body too! Make sure it’s fixed well, you are ready to go!
Flat Surface Mount
With a magic mat allows your Bullet HD Wearable Camcorder to stick with
any flat surface or glass surface. Based by a multi position metal ball, you
can shoot at any anger at 720 degree. Make sure it’s fixed well, you are
ready to go!
Car Charger
Keep recording while charge your camcorder in car!

Warranty:
Your BulletHD -ADVENTURE Wearable Sports Camcorder is covered by a 365 days Limited Warranty
on parts and labor from the date of original purchase, and purchases must be made through an
authorized dealer. The warranty covers defects in workmanship and materials. The warranty does not
apply to units, which have been damaged or abused intentionally or unintentionally. Purchase from
individuals or unauthorized internet sites voids the warranty. The warranty does not apply to units where
the rear cap was incorrect closed.
Tampering with or altering the unit will void the warranty. Any unauthorized service will void the warranty.
Original sales receipt must be produced for any warranty service and a return authorization must be
obtained from our customer service points.
WARNING:
The form and functions of BULLETHD, accessories, logos, and all graphics are the patented, protected
property of Silver Creation International Ltd. Any attempt by anyone other than our authorized dealers to
copy or reproduce any of the above without permission of SCi will be met with legal action. SCi products
are available for purchase only from authorized dealers.