SilverStar Motor-Pro(RGY) Laser User manual

USER MANUAL
Version 1.0
www.yagang.com
Motor-Pro(RGY) Laser

1.Open the box and checking
2. Safety instructions
Congratulations on choosing our products! Please carefully read this instruction manual in its
entirety and keep it well for using reference. This manual contained about the installation and the
relative using information of this products. Please according to this manual's relative speaking when
using this equipment.
This equipment was made of new style, high intensity plastic and cast aluminium. It fully
shows the modem times light characteristic with beauty structure. And it was made according to CE
standard. Fully up the international standard of DMX512 agreement. Master or slave in phase
control. Can be use in large entertainment, theater, performing and playing hall, etc.
When receiving this product please carefully bring and put; and check that whether this
equipment has been damaged or not during transportation. And please also check the following
thing was enclosed:
Signal line ----------------------- one piece Safety string -----------------------one piece
User Manual-----------------------one set CD----------------------------------one piece
USB download controller--------one set D ---------one piece
Every person involved with installation and maintenance of this device have to:
- be qualilfied
- follow the instructions of this manual
eep this device away from rain and moisture!
nplug mains lead before opening the housing!
OR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY
EFORE YOU INITIAL START - UP!
his device has left our premises in absolutely perfect condition. In order to maintain
this condition and to ensure a safe operation, it is absolutely necessary for the user to
follow the safety instructions and warning notes written in this manual.
he manufacturer will not accept liability for any resulting damages caused by the non-
observance of this manual or any unauthorized modification to the device.
Please consider that damages caused by manual modifications to the device are not
subject to warranty.
Never let the power-cord come into contact with other cables! Handle the power-cord
and all connections with the mains with particular caution!
Make sure that the available voltage is not higher than stated on the rear panel.
Always plug in the power plug least. Make sure that the power-switch is set to OFF-
position before you connect the device to the mains. The power-plug has to be
accessable after installing the device.
Make sure that the power-cord is never crimped or damaged by sharp edges. Check the
device and the powercord from time to time.
ownload control plus
CAUTION:
Important:













K
U
F
B
T
B
W
e careful with your operations.
ith a high voltage you can suffer a dangerous electric shock when touching the
wires!
T

3.Attention
4.Warning
1. Must operate according to the user manual. Don't separate the light personally.
Call the technician when the machine breaks down.
2. Please do not see the laser beam directly to avoid any damage.
3. Before connect or disconnect the power, please adjust the luminance of the
laser diode to the least to avoid any damage to the laser diode.
4 . This unit should be keep dry, do not use in the rain or dank and dusty
environment. It can be use in the outdoor with the water-proof cover protector.
5. Set the light immobility and try to avoid strong shake or hit.
6. Prevent dust into the equipment to avoid problems.
7. Please keep that there's no other equipment or decorating materials obstructed
the exhaust fan and the vent-pipe when the equipment was working.
8. Before connect power, check the plug is immobility or not, power line should
be connect well.
9. Please do not open or close the equipment frequently that's to avoid any affect
to the life span of the laser diode, and try the best to avoid the long time
working.
10. Due to the characteristic of the laser diode, after three hours working, it should
be close at least 25 minutes until the laser diode cooling then work again.
11. Don't touch the light or draw the power line when your hand was wet. And do
not pull the electronic power line.
12. Maintain the distance at least 10M above from the equipment to the object.
13. This equipment does not have any parts can repair for the users, please do not
open the equipment.
14. When the laser diode became dim or damaged please contact the dealer timely.
15. To use the original package when transport again and to avoid shake.
Don't look the light directly to prevent make some destroy with eyes..
2 Keepthe space between light equipments and the lighted things morethan 10 meter.
1 、
、

1 -moving head
2 -yoke
3 -carry handles
4- download control socket
5-.MIC
6 -DMX OUT
7 -DMX IN
8 -POWER IN
9 -Sound operation sensitivity.
10 -mode button
11 -save button
12 -up
13 -down
14 -display
5.Description of the device

6.1 Connection to the mains
Verify the power supply settings before applying power!
If you wish to change the power supply settings,see the chapterAppendix.
Connect the fixture to the mains with the enclosed power cable and plug.
The earth has to be connected!
The occupation ofthe connection-cables is as follows:
Pin
Cable (EU) International
Brown
Lightblue
ellow/Green
Y
Black
White
Green
Live
Neutral
Earth
L
N
Cable (US)
6.2 DMX-512 connection/connection between fixtures
Onlyuse a stereo shieldedcable and 3-pin XLR-plugs andconnectors in orderto connect the
controller with the fixture orone fixture with another.
DMX-OUTPUT DMX-input
1
2
3
-Ground
-Signal(-)
-Signal(+)
1 1
2
3
-Ground
-Signal(-)
-Signal(+)
Occupation of the XLR-connection:
XLR mounting-socket: XLR mounting-plug:
Caution: At the last fixture, the DMX-cable has to be terminated with a terminator. Solder a
120 resistorbetween Signal (-)and Signal (+)into a3-pinXLR-plugand plug it inthe
DMX-output of the last fixture.
Ω
5Pins canon( )plug
Pin 1: GND(SCREEN)
Pin 2: Signal(-)
Pin 3: Signal(+)
Pin 4: N/C
Pin 5: N/C
3
Pin 1: GND(SCREEN)
Pin 2: Signal(-)
Pin 3: Signal(+)
Pins canon(socket)
5Pins canon(socket)
Pin 1: GND(SCREEN)
Pin 2: Signal(-)
Pin 3: Signal(+)
Pin 4: N/C
Pin 5: N/C
3plug
Pin 1: GND(SCREEN)
Pin 2: Signal(-)
Pin 3: Signal(+)
Pins canon( )
The transform of the controller line of 3 pins and 5 pins (plug and socket)

LED
Mode Function Condition
YES--negative direction
Function Table:
YES--negative direction
7. Control Board Operation
Vertical movement in positive
or negative direction
Address code set
Reset YES--reset
Working mode DMX512 mode
Automatic
Control board operation way:
1.Select working mode bypressing MODE.
2.
3.Press UP and DOWN to select working condition. Press ENTER to confirm the selection.
Music mode

CHANNEL
VALUE
FUNCTION
255 Reset
0~254
3 Speed 1
254 grade speed (fast to slow)
0~255
2 TILT
TILT 0~280 °
0~255
1 PAN
PAN 0~530 °
The product has 16 operate channels(international standard DMX512 signal),The details
as follow
：
8. DMX512 operate
4
Control Mode
0-63
64~127
128~191
192~255
MusicActive,5-13channels out of effect
StandAlone, 5-13channels out of effect
Manual (MusicActive)
Manual (Automatic)
Close
Green
Yellow
Full multi color
Stochastic single color
Stochastic multiplecolor
Fluent
Red
0~255
6Pattern
64 patterns(0~255)/4=(0~63)
43grade speed(0~255)/6=(0~42)
42 grade size(1~255)/6=(0~42)
0~19 reduce
20~42blow up
20 original size
12 grade speed(0~255)/23=(0~11)
No rolling
Horizontal roll
Vertical roll
Horizontal & vertical roll
No move
Horizontal move
Vertical move
Horizontal & vertical move
8
horizontal &
vertical roll
10
Horizontal &
vertical move
11
Horizontal &
vertical stretch
No
Horizontal
V
stretch
stretch
ertical stretch
Horizontal & vertical stretch
7 Speed
13
Slow-draw
speed
16
Size
192~255
192~255
128~191
0~255
1~255
0~63
64~127
128~191
0~255
0-63
64~127
0-63
64~127
192~255
128~191
12
Small To Lar
g
e &
Lar
g
e To Small
No
Zoom from one point to large
Zoom from large to one point
Zoom
0~85
86~169
170~255
No Rotation & No Point-Draw
Rotation
Point-Draw(Only Point)
Rotaion & Point-Draw
9
Rotation &
Point-Draw
192~255
128~191
0-63
64~127
14
Scan Speed
0~255
255 grade speed (fast to slow)
15
Change Color Speed
0~255 12 grade speed(0~255)/23=(0~11)(fast to slow)

9.Specification
Maintain












Volta
g
e: AC 220V~240V, 50/60Hz
Total power: 105W
Signal input power: -5~+5V
X/Y axes beam scanning optical angle: 0~+/-30
Input signal bandwidth: 0~1000Hz
Condition temperature: -10 C~35 C
Laser light power: Class 3
Class 3
Fuse: 250V 3A, 5 20mm
Net weight: 30 kg
Dimension:
°
°°
Φ×
Maintenance should be performed every 15-day period, by using a sponge which is
dipped with alcohol, rather than wet cloth or other chemical liquid, to clean the mirror.
Warning: Power must be disconnected before maintenance or repair. Do not look at the
light source directly.
NOTE: Don't seperate laser machine from laser power and repaire them by yourself
otherwise no good repair service will be supplied.
Green 532nm>100m W
47 x 36 x 71cm
Red 635nm>250m W
ATTENTION: DISCONNECT INPUT POWER BEFORE MAINTAIN.
DON'T LOOK STRAIGHTLY AT THE LIGHT SOURCES.
7

8