Sioux Tools 5264 User manual

Form # Z495
Model 5264 & 5266
Date2-02lA
Lever Style NeedleScalerIChipper
7 IMPORTANT
Readthese instructionscarefully beforeinstalling,operating,servicingor repairingthis
tool. Keepthese instructions ina safe accessibleplace.
..
1 SAFETY MESSAGES 1 A WARNING 1 Operator Instructions
PersonalSafetyEquipment
Always ReadInstructionsBefore Includes:
Use
- Safety Glasses YES
1 @ UsingPowerTools
1 SafetyRules
Safety ruleswhen using a 5264 & 5266 Needle ScalerIChipper
Use - Safety Gloves YES
Use - Safety Boots YES
Use
- BreathingMasks
Use
- Ear Protectors YES
- Always wear safety goggles.
- Prolongedexposureto vibration may cause injury.
- Readallinstructions before usingthistool.Alloperatorsmust
befullytrained
in its use and aware of these safety rules.
- Donot exceedthe maximumworkingair pressure.
- Usepersonalprotectionequipmentas recommended.
- Some dust createdby power sanding, sawing, grinding,
drilling, and other construction activities contains
chemicalsknowntocausecancer, birthdefectsandother
reproductiveharm.
- Usecompressedaironlyatthe recommendedconditions.
- If the tool appears to malfunction, remove from use
immediatelyandarrangefor serviceandrepair.Ifitisnot
practicalto removetoolfromservice,thenshutoff theair
supply to the tool and write or have written a warning
noteandattachitto the tool.
- Iftool istobe usedwith a balanceror other suspension
device, ensure that the tool is firmly attached to the
suspension/supportdevice.
- When operating the tool, always keep the body and
particularlythehandsawayfromtheworkingattachment
ixedto the tool.
- Thetool isnot electricallyinsulated.Neverusethe tool if
there is any chance of coming into contact with live
electricity.
- Always when usingthe tool, adopt a firm footing and/or
positionand rip the tool sufficiently only to overcome
any reaction forces that may result from the tool doing
work. Do notovergrip.
- Useonlycorrectsparepartsfor maintenanceandrepair.
Do not improvise or make temporary repairs. Major
servicing and repairs should only be carried out by
personstrainedto do so.
- Do not lock, tape, wire, etc. the 'OnIOff' valve in 'On'
position.The throttletri gertlever, etc. mustalwaysbefree
to return to the '6ft' position when released.
- blwa s shut off the air supply to the tool and pressthe
On/8ff1valve to exhaust the air from the feed hose
beforefitting,removingor adjustingthe
workina attachment fittedto the tool.
(^ AlwaysWear Safety Goggles
@ Wear Hearing Protection
Avoid ProlongedExposure
A T o Vibration
- ~eforeusingthetool, makesurethat a
shut off device has been fitted to the
supply line and the position is known
and easily accessible so that the air
supplyto the tool canbe shutoff inan
emergency.
- Checkhoseandfittingsregulartyfor wear.
- Take care against entanglement of the
movingpartsofthetoolwithclothing,hair,
ties, cleaningrags,rings,jewelry,
watches,
bracelets,etc.This couldcausethe body
orparts of the body to bedrawntowards
and incontactwiththemovingpartsofthe
toolandcould
be very dangerous.
- Itisexpectedthat userswilladoptsafe
working practices and observe all
ores seen Use
Work Stations
PuttingInto Service
Operating
Dismantling and Assembly.
local, regional or country legal requirements when
installing,usingor maintainingthe tool.
- Takecare thatthe exhaustairdoesnotpointtowardsany
other person or material or substance that could be
contaminated byoildroplets.When first lubricatinga tool
or if the tool exhaust has a highoil content, do not allow
theexhaustairtocomenearvery hotsurfaces orflames.
- Neverlay the tooldownuntiltheworking attachmenthas
stoppedmoving.
- When the tool is not in use, shut off the air supply and
pressthrottle triggerhever to drain the supply line. If the
tool is not to be usedfor a oeriod of time. first lubricate.
disconnectfromairsupplyandstoreinadryaverageroom
temperature environment.
- If the tool ispassedfrom one user to a new or inexperi-
enceduser, make sure theseinstructionsare availableto
bepassedwiththe tool.
- Do not remove any manufacturer fitted safety devices
where fitted, i.e., wheel guards, safety trigger, speed
governors,etc.
- Whereverpossible, secureworkpiecewithclamps,avise,
etc. to make it rigidso itdoes not move during the work
operation. Keepgoodbalanceat all times. Do notstretch
or overreach.
- Try to matchthe tool tothe work operation.Do not usea
tool that istoo lightor heavy for the work operation. If in
doubt, seek advice.
- Ingeneral terms, this tool is not suitablefor underwater
useor useinexplosiveenvironments-seek advicefrom
manufacturer.
- Try to makesurethatthe work areaiscleartoenablethe
work task to be performed safely. If practical and
possible, try to clear unnecessary obstructions before
startingwork.
- Always use air hose andcouplingswith minimum work-
ing pressure ratings at least
1 112 times the maximum
working pressureratingof the tool.
Take Air From Top
All PipeAnd Fittings
Should Be 112" Or Larger
,
Compressor
with Sufficient Capacity
To Maintain Recommended 11 11 11
Workina Pressure At 11 11
1 Recommended Air Supply System
Figure 1
PageNo 1