SIRETTA SNYPER-LTE graphyte User manual

6
5
1
2
4
38
7
2
5
SNYPER-LTE Graphyte with support cradle underneath
PSU with 4 adapter heads
2x USB cables - 0.5m and 1.8m
USB Car Charger
Omni-directional Antennas - General Purpose (Black) and
2600MHz (Silver/Grey)
Directional Antenna
Extension Cable for Directional Antenna
Tripod
1
2
3
4
5
6
SNYPER-LTE Graphyte
Case Contents
7
8
GRAPHYTE
CASE
CONTENTS

SURVEY
NEW SURVEY OPTIONS
1) Select Full, LTE, UMTS or GSM
2) Select number of cycles and time interval
3) Connect charger to extend surveys
4) Press to start survey
5) Leave device to complete surveys
POST SURVEY OPTION 1
1) Select Show Results
2) Press for liveSCAN
Use key to exit
POST SURVEY OPTION 2
1) Select Show Summary
Use key to exit
POST SURVEY OPTION 3
1) Select Save Results
This is only necessary if Auto Save is off
Use key to exit
SAVED RESULTS
STORED SURVEY
1) Select results le you wish to view
2) Selecr Show Results, Show Summary,
or Export Results
Use key to exit
FIRST STEP BEFORE USE
1. BATTERY CHARGE: Charge the unit for 4-6 hours or until the red charge light is extinguished
2. SOFTWARE REVISION: Go to www.siretta.com/software-library to check for latest software
• Click on the “(V3)” tab
• Compare website revision to that in the SNYPER’s “ABOUT” menu(this can be accessed from the “MAIN MENU”)
• Upgrade the software accordingly, following the procedure in the SNYPER-LTE Graphyte manual https://www.siretta.com/products/cellular-network-
analysers/4g-lte-analyser-network/snyper-lte-graphyte-eu/
3. SETTING TIME: Power up the SNYPER. From “MAIN MENU” select “Setup” > “Set Time”. Use the keypad arrows to set date/time so you can timestamp
your surveys. You are now ready to go.
POWER ON TO BRING UP MAIN MENU SELECTIONS
SETUP
Language: ENG/DEU/FRA/ITA/SPA
Display: Screen brightness and text colours
Auto off: Auto switch off and dimming
Documents: Results le types and Auto Save
Sound: On/Off
System: Mode and region of operation
Set Time: Set date and time
Factory Reset: Return to default settings
Use key to exit
ABOUT
Key reference parameters about the device
Use key to exit
PC CONNECT
PC CONNECT
1) Connect USB cable between device and PC
2) Select ON to enable USB connection, begin
results download
3) Copy les required to PC
4) Select OFF to disable connection
Use key to exit
You can then view results les on your PC
For more detailed information,
please visit our website at www.siretta.com
SNYPER-LTE GRAPHYTE QUICK
START GUIDE