TYPICAL+MEASUREMENT+PROCEDURE+++
!
When! working! with! VinciLab! as! a! standalone! device! VinciLab!is! controlled! by! its! touch!
screen!and!Coach!is!running!on!VinciLab.!!!
!
Turn!VinciLab!on!by!pressing!its!power!button.!Wait!until!the!Home!Screen!appears.!!
•Ensure!VinciLab!has!sufficient!battery!power!or!is!connected!to!a!power!supply.!!
•On!the!Home!Screen!tap! !to!open!the!Coach!Application.!
•Connect!sensor(s)!to!the!sensor!input(s)!of!VinciLab.!!!
!
•Create!a!new!Coach!Result:!! ! Or!open!an!existing!Coach!Activity/Result:!!
Tap! !or! tap! !and! select! New.! When!
you! want! to! use! only! the! internal! Sound!
sensor!select!New+(Sound+Only).+!!!
A!new!Result!opens.!!
-Coach!automatically!detects!and!identifies!
the! connected! sensor(s).! When! a!
connected! sensor! is! identified!then! its!
name! appears! in! the! Activity! Screen! and!
its! live! readings! on! the! Sensors! Screen.!
When!a!sensor!is!not(identified!then!it!has!
to! be! manually! selected! from! the!
Sensor!Library.!
To!select!a!sensor!from!the!
Sensor! Library! go! to! Sensors+ Screen,! tap!
!and! select! Sensor+ Settings,! tap! a!
sensor! input! tab! to! which! the! sensor! is!
connected,! tap! Choose!(or! None)+ and!
select!a!sensor!from!the!list.!
Tap! !or! tap! !and! select! Open!or+Open+
CMA+Project….!Browse!to!select!the!desired!
Activity/Result.!Confirm!with! .!
The!Activity/Result!opens.!!
-Coach! automatically! detects! and! identifies!
the! connected! sensor(s).! If! the! identified!
sensor! is! different!from! the! sensor! defined!
in! the!Activity/Result!then!the!sensor!listed!
on! the! Activity! Screen! is! displayed! in! red.!
The!sensor!digital!display!shows!information!
about! the! sensor! defined! in! the! Activity!
(red)! and! the! sensor! identified! by! VinciLab.!
Connect!the!defined!sensor!or!change!it!into!
the! detected! sensor! by! touching! Exchange.!
This! feature! is! not! available! for! sensors,!
which!cannot!be!identified.!!
•Tap! !to!check!the!live!readings!of!the!sensors.!The!live!data!are!not!stored!in!VinciLab’s!
memory.!
•You! are! ready! to! start! a! measurement.! The! measurement! will! be! executed! according! to!
the!given!measurement!settings.!Tap! !to!check!or!change!these!settings.!!
•Tap! !to!start!collecting!data.!!!
oIn!most!cases,!Coach!directly!starts!the!measurement.!!
oIf!triggering!is!enabled!then!the!measurement!is!started!automatically!when!the!trigger!
conditions!are!met.!
oFor! a!Manual!measurement! tap! !to! collect! a!single!measurement.!When! keyboard!
input!is!requested!then!the!value!of!one!or!more!quantities!has!to!be!typed!in.!
•The!measurement!stops!when!the!specified!measurement!time!(time-based)!or!specified!
number!of!samples!(manual)!has!been!reached.!Tap! !to!interrupt!the!measurement.!!
•To!save!your!Result!go!to! ,!tap! !or!tap! !and!select!Save!or!Save+As….!!
When!tapping! !and!starting!a!new!data!collection,!existing!data!is!overwritten!by!!
the!new!data!without!any!warning.!To!avoid!losing!any!data!save!your!Result!first.!
