Sirio Antenne MS299 User manual

ATTENTION
IF YOU HAVE ANY PROBLEMS OR QUESTIONS, EMAIL OR CALL
CUSTOMER SERVICE BEFORE YOU RETURN THIS PRODUCT TO THE
STORE WHERE IT WAS PURCHASED.
For Customer Service:
USA: Email: /Call: 1-877-897-1222
CANADA: Email:
/Call: 1-866-666-0421
support
@orderhelp.com
[e-mail] /
www.sirio.ca
INSTRUCTION MANUAL ENCLOSED
INSTRUCTION MANUAL ENCLOSED

PATIO FURNITURE SET
PATIO FURNITURE SET INSTRUCTION
MS299
PARTS LIST
Part Description Quantity
PARTS
AR ARMREST (RIGHT) 3
AL ARMREST (LEFT) 3
B CLUB CHAIR SEAT 2
C CLUB CHAIR BACK 2
D LOVESEAT ARM CHAIR SEAT 1
E LOVESEAT ARM CHAIR BACK 1
F COFFEE TABLE FOOT 2
G TABLE TOP WITH GLASS 1
HARDWARE
HALLEN KEY 1
JWASHER(M6) 45
KBOLTS(M6X15MM) 45
L PLASTIC END CAP 45

For Customer Service:
Email:
Call:1-877-897-1222 / 1-866-666-0421
[e-mail]
www.sirio.ca
[email protected]/

[email protected]
[e-mail]

Step 2. Locate club chair seat (part#B) to Left armrest (part#AL) by the pre-
drilled threads. Haft fasten Bolts(K) with Washers(J) by Allen Key(H).
Step 3. Locate club chair back (part#C) to the middle of two armrests by the
pre-drilled threads. Fasten Bolts(K) with Washers(J) by Allen Key(H). Also
fasten all the bolts. And cover all bolts by caps(L). Assemble another club
chair by same steps.

Step 4. Locate loveseat chair seat (part#D) to right armrest (part#AR) by the
pre-drilled threads. Haft fasten Bolts(K) with Washers(J) by Allen Key(H).
Step 5. Locate loveseat chair seat (part#D) to Left armrest (part#AL) by the
pre-drilled threads. Haft fasten Bolts(K) with Washers(J) by Allen Key(H).

Step 6. Locate loveseat chair back (part#E) to the middle of two armrests by
the pre-drilled threads. Fasten Bolts(K) with Washers(J) by Allen Key(H). Also
fasten all the bolts. And cover all bolts by caps(L).
Step 7. Place the table top on a soft surface . Locate table foot to the bottom
of table top(part#G) by the pre-drilled threads. Fasten all bolts(K) with
washers(J) by allen key(H) . And cover all bolts by caps(L) .

Step 8. Flip up the whole table . Put glass top into table top.
Till now you have finished the whole assembly and enjoy your furniture !