Sister Bay MHMT-A User manual

You will also need a phillips-head screwdriver
( not included )
A
B
(6)
( 10 )
1 - Attach part ( E ) , Right Arm Leg Assembly,
and part ( F ) , Seat Bottom, as shown in
Figure 1 using ( 3 ) of screw ( A ) and
tighten screws using an Allen Wrench.
Figure 1
2 - Attach part ( D ), Left Arm Leg Assembly,
and part ( F ) ,Seat Bottom, as shown in
figure 2 using ( 3 ) of screw ( A ) and
ti gh ten screws using an Allen Wrench .
Figure 2
D
E
Do not use
any hand drill
on this product
1.50
Assembly Instructions
( Left Arm Leg )
Assembly
F
E
( Left Arm Leg )
Assembly
F
( Seat Bottom )
G
( Seat Back )
( Right Arm Leg )
Assembly
D
2.75
ALLEN WRENCH
( included )
F
E
( Right Arm Leg )
Assembly
( Seat Bottom )
A
A
Hardware and Parts
Item No: MHMT-A
HAMPTON ADIRONDACK
Assembly Instructions

3 - 2 Attach the assembly from Figure 2 to part ( G )
Seat Back, (H) lower yolk support as shown in
Detail 3 of Figure 3 using ( 6 ) of screw ( B ) and
tighten screws using a phillips-head screwdriver.
3 - 1 Attach the assembly from Figure 2 and part ( G )
Seat Back, as shown in Detail 1 and Detail 2 of
Figure 3 using ( 4 ) of screw ( C ) and tigh ten screws
using a phillips-head screwdriver.
G
( Detail 1 )
( Detail 2 )
( Detail 3 )
BB
H
(Lower yolk)
Support
B
Figure 3
CARE AND MAINTENANCE
To clean your product, use mild soap and water. For heavy soil build-ups use any non-abrasive household cleaners
or ask your Sales Representative about Sister Bay Furniture Cleaner.
Please contact our Customer Service Department for assembly assistance, questions or replacement parts at 1-866-947-7632
or email [email protected]. Our Customer Service Department is available Monday - Friday from 8:30 a.m. to 4:30 p.m. EST