SJC brands tasman Essentials Joey User manual

Packaging and instructions
printed on recycled materials
Save the instructions for future reference.
Assembly of this furniture is best undertaken by two people.
SJC Brands Pty Ltd abn. 58 106 988 578 w.www.tasmaneco.com.au
4-6 Merryvale Rd, Minto, NSW 2566 p.o. box 5878 MINTO DC, NSW 2566
t. 02 9603 5000 f. 02 9603 7000 email. [e-mail]
Assembly Instruction
Care & Cleaning Tips:
For general dusting / cleaning - periodically wipe the cot with a dry soft cloth. To remove
day to day spills or dirt, wipe down with a soft cloth and mild solution of warm soapy
water. Avoid scourers and steel wool as these will damadge the finish. Always dry the
cot after cleaning.
Joey cot

Parts List
Headboard x 2 Side panel x 2 Base x 1
M3 Allen key x 2 M4 Allen key x 1
M6 x 60mm Bolt x 12 Metal cross dowel x 12 M6 Double ended screw x 4
M4 Double ended screw x 4 Wheel x 4
Due to the heavy nature of the cot, it is recommended assembly is undertaken by two people.
Warning
Safety Consideration for your Child.
· Follow the manufacturer’s assembly instructions in detail to ensure the safety features of the cot are not compromised.
· ENSURE THE COT IS NOT PLACED TOO CLOSE TO HEATERS, BLINDS, CURTAINS, WINDOWS OR POWER POINTS.
· DO NOT HANG ANYTHING NEARBY WHERE THERE IS A POTENTIAL DANGER OF THE ITEM FALLING INTO THE COT.
· KEEP ANY MEDICATION, STRING, ELASTIC, SMALL TOYS OR SMALL ITEMS SUCH AS MONEY OUT OF REACH FROM
ANY POSITION IN THE COT. It is advisable to keep all items out of your child’s cot to prevent suffocation or strangulation.
· TO PREVENT FALLS, THE MATTRESS BASE OF THE COT SHOULD BE ADJUSTED TO THE LOWEST POSITION BEFORE
YOUR CHILD CAN SIT UP.
Recommended Mattress Size.
· This cot has been manufactured for use with a mattress which measures 530 mm (wide) x 1030 mm (long) x 60 mm (maximum
thickness). The width and length are specified because it is IMPORTANT that the gaps between the mattress and the sides and
ends of the cot do not exceed 40 mm when the mattress is pushed to one side or end, and 20mm when the mattress is centred.
in the cot.This is to minimise the risk of a child’s climb becoming caught in the gap.The thickness of the mattress had been
specified to ensure that the depth of the cot is greater than 500mm with the mattress base in the lower position to minimise the
risk of a child climbing or falling out of the cot .
Safety Consideration for Cot.
· Re-tighten all connector bolts (at least two months after assembling the cot), as some may loosen as the cot settles. Regulary
check all of the connecting bolts, making sure they are tight.
· Regularly check cot for weakness in panels joints and panels. If any weaknesses are found, report immediately to SJC Brands
via: www.tasmaneco.com.au
· Do not use cot if it has been damaged in any way and always use genuine Tasman Essentials parts. Contact your nearest
Tasman Essentials stockist or original place of purchase for spare parts
2
Mattress x 1

!
Metal cross dowel x 4
M6 x 60mm Bolt x 4
M6 x 15mm Cap screw x 4
3

4
M6 x 60mm Bolt x 8
Attach the sides to headboards secure with M6 x 60mm bolts and metal cross dowels.

5
M4 Bolt x 4
M4 Cap screw x 4
M3 Allen key x 2
M4 Allen key x 1

Guarantee & Warranty
Our goods come with guarantees that cannot be excluded under the Austalian Consumer Law. You are entitled to a replacement or
refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the
goods repaired or replaced if the goods fail to be of acceptable quality and the failure dose not amount to a major failure. The guarantee
.
2 Year Materials and Workmanship Guarantee
If within 2 years of the date of purchase of this product, there is found any defect in materials or workmanship of this product, SJC
Brands Pty Ltd, will replace the product free of charge, subject to the conditions below. The replacement product will be identical to the
originally purchased product wherever possible, though in situations where the identical model is discontinued or out of stock, then
SJC Brands Pty Ltd will replace the product with a model that is functionally equivalent.
This Guarantee is made to the purchaser and/or original owner only. For purposes of this Guarantee, the original owner is considered to
be the person who  rst makes use of the product. Note: In situations where a person purchases this product for the purpose of gifting
to another, the recipient is considered to be the original owner.
Conditions.
The ‘2 Year Materials and Workmanship Guarantee & Warranty will be void and nullied in circumstances where:
1. The item is improperly assembled or adjusted and or not assembled strictly in accordance with the written instructions provided by
the seller in the box containing the item.
2. There is damage to the product and that damage is deemed by SJC Brands Pty Ltd to be caused by incorrect assembly, misuse or by
use or storage outside of the physical or environmental specications of the product.
3. There are modications to the product or to parts of the product that were not authorised in writing by SJC Brands Pty Ltd.
4. The item is transferred, gifted or disposed of by the original owner to another.
The product must be returned to SJC Brands Pty Ltd or to the place of purchase with proof of purchase, including date and purchase price.
SJC Brands Pty Ltd ABN:58 106 988 578
PH: 02 9603 5000 FAX: [phone]
Add: 4-6 Merryvale Rd,Minto NSW 2566
Email: [e-mail]
describedbelowisinaddiontotheguaranteeprovidedbylaw.
WARRANTY CLAIM PROCEDURE:
For warranty claims, please email us via our claims section on our website www.tasmaneco.com.au or visit the store where the
product was purchased.