Skywalker ActivPlay SJG209 Quick guide

USER MANUAL
Skywalker Holdings LLC
P.O. Box 574, Brigham City, UT 84302
ASSEMBLY, MAINTENANCE, &
MODEL # SJG209
WARNING
Read all precautions and instructions in
this manual before using this equipment.
Save this manual for future reference.
Ages:4-8
Maximum occupancy: 2 users
Maximum weight: 162 lbs.

2
TABLE OF CONTENTS
WARNING
CHOKING HAZARD- Small
parts not for children
under 3 years.
WARNING
Adult assembly required.
STOP EVERYTHING YOU'RE DOING AND REGISTER YOUR PRODUCT
Find our warranty registration online by typing in: www.skywalkertrampolines.com/registration/
You'll need to have the following information handy:
• Name • Email address
• Address • Product model number
• Phone number • Product serial number
• Date of purchase • Retailer the product was purchased from
HEY WE'VE GOT SOMETHING REALLY IMPORTANT TO SAY
Check us out online! We've got assembly videos (for those of you who prefer movies over books), FAQs (so you
know you're not the only one who needs help), fascinating blog posts (5 Tips to Keep Your Kids Active) , and most
importantly, find us on social media! Because we want to be your friend. We'd love to see how you are using our
products!
Website: skywalkertrampolines.com
Facebook: facebook.com/skywalkertrampolines
YouTube: youtube.com/c/SkywalkerTrampolines
Pinterest: pinterest.com/swtrampolines
Twitter: twitter.com/swtrampolines
Instagram: instagram.com/skywalker_trampolines
Part List.....................................................................................................................................................................................3
Part Identification..............................................................................................................................................................4-5
Exploded Drawing..............................................................................................................................................................6
Assembly..................................................................................................................................................................................7-18
Installation...............................................................................................................................................................................19
Maintenance & Care Information...........................................................................................................................20
Safety information............................................................................................................................................................21
Instructions for Use.........................................................................................................................................................22
Warning Label Placement............................................................................................................................................23
Playground Surfacing Materials Information................................................................................................24
Limited Warranty.................................................................................................................................................................25-26

3
PART LIST
ORDERING REPLACEMENT PARTS
We get it, sometimes things happen, but the fun shouldn’t stop just because you need a new bolt or screw. To order
replacement parts, check out our website at: www.skywalkertrampolines.com or call our toll-free Customer Care
Hot-line at 1-866-603-Jump (5867), Monday - Thursday 8 a.m. to 5 p.m., Friday 8 a.m. to 3 p.m. (excluding holidays).
Our customer service team will ask you a few questions in order to get the replacement part sent out as soon as
possible. We’re not trying to complicate your life, we promise.
When calling, make sure to have the following information ready:
• The model # of the product (see the front cover of this manual)
• The key # and description of the part (see the part list above)
• The quantity of parts needed (only you know the answer to that one)
BEFORE YOU BEGIN
Thanks for choosing ActivPlay! We’re just as excited as you are to help your family live an active (but most
importantly FUN) lifestyle. This model is one of our favorites, and we’re confident you’ll love it too. We want to make
things easier for you, so we have listed all the important information that you (and your little outdoor adventurers)
need to know. Make sure you brush up on the warnings, instructions, assembly, maintenance, and use of your new
product, because there will be a pop quiz at the end (Okay, not REALLY, but if you’re still reading this, props to you!
You’re awesome.).
Key No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
#
Qty.
1
4
2
2
1
2
1
1
1
1
2
12
32
44
1
2
1
1
2
1
1
Description
Curved Tube Frame
Ball Handle Swing
Gymnast bar
Free Swinging Ring
Curved Tube 1
Upright
Joint
Swinging Tube
Top Frame 1
Top Frame 2
M8X65mm Button Bolt
M8 Locknut
M8X20mm Button Bolt
M8 Arc Washer
Curved Tube 2
Curved Tube Frame 2
Hex Key
Wrench
Anchor
M8 Washer
User’s Manual

4
Before you begin, take a look at the drawings below to make sure you have all the parts. The numbers in the squares
to the left (key numbers) will help you identify the parts during assembly.
PART IDENTIFICATION
1 2 3
456
78
Gymnast Bar
(x2)
Free Swinging
Ring (x2)
Curved Tube 1 (x1) Upright (x2)
Joint (x1) Swinging Tube
(x1) 9Top Frame 1 (x1)
10 Top Frame 2 (x1) 11 M8X65mm Button
Bolt (x2) 12 M8 Locknut (x12)
(11 pre-installed)
Curved Tube
Frame (x1)
Ball Handle Swing
(x4)

5
13 14
M8X20mm Button
Bolt (x32)
16 17
19 20
18
Curved Tube
Frame 2 (x2) Hex Key (x1)
Anchor (x2) M8 Washer
(x1)
Wrench (x1)
M8 Arc Washer (x44)
(11 pre-installed)
Curved Tube 2
(x1)
15

6
EXPLODED DRAWING
(1) (11)
(12)
(12) (12)
(13) (13)
(14)
(14)
(15) (14)
(14)
(14) (14)
(2)
(14) (14)
(14)
(14)
(14)
(14)
(14)
(14)
(14)
(14)
(14)
(14)
(14) (14)
(14)
(13) (13)
(13) (13)
(13)
(13)
(13)
(12) (12)
(12)
(20)
(2) (4)
(3)
(9)
(2)
(6)
(6)
(19)
(16)
(7)
(8)
(2)
(12)
(12)
(12)
(14)
(10)
(14) (14)
(14) (14)
(13)
(3) (4)
(16)
(5)
(13)
(19)
(13)
(13)
(13)

7
ASSEMBLY
STEP 1
STEP 2
Register your Hanging Jungle Line. For info on warranty registration, see page 2.
In order to attach the Hanging Jungle Line to your jungle gym, you may need to adjust the position of your hang-
ing bridge and monkey bars. When facing your jungle gym, the hanging bridge will need to sit in the middle of the
side facing you and the monkey bars will need to sit in the middle of the side to the right of you. See the image
below for an example.
READ THIS BEFORE YOU BEGIN
• We’ve provided some tools to help with assembly, but you’re more than welcome to use your own
• The assembly steps refer to parts by their descriptions and key numbers (see the part list on page 3)
• The assembly steps are written in a specific order, and if you don’t follow them exactly, you may end up having to
start all over again
• Most importantly, this may not be the easiest thing you’ve ever done, but it will be worth it. Trust us.
STEP 3
To begin, connect the Curved Tube
Frame (1) to the Curved Tube 2 (15) as
shown below with the two M8X65mm
Button Bolts (11), two M8 Arc Washers,
using (14) the M8 Locknut (12) on the
bottom bolt.
Curved Tube
Frame (x1)
1Curved
Tube 2
(x1)
15 M8 Arc Wa-
sher (x2)
14
M8X65mm
Button Bolt (x2)
11 M8 Lock-
nut (x1)
12
(11)
(11)
(14)
(12)
(15)
(1)
(14)
Bridge in front
Monkey Bars to
the right

8
ASSEMBLY
Joint
(x1)
7
STEP 4
M8X20mm
Button Bolt (x4)
13 M8 Arc Wa-
sher (x4)
14
Now, attach the Curved Tube 2 (15) from the previous
step to the smaller side of the Top Frame 1 (9).
The round holes in the Top Frame 1 (9) should be facing
up.
Use four M8x20mm Button Bolts (13) and four M8 Arc
Washers (14) to secure.
STEP 5
6
Connect a shorter side of the Joint (7) to the free end of
the Top Frame 1 (9) with four M8X20mm Button Bolts (13)
and four M8 Arc Washers (14) as shown. Make sure the
round hole in the middle of the joint is facing up.
smaller side
(9) (9)
(15)
(15)
(13)
(13)
(14)
(14)
(9)
(9)
(9) (9)
(15)
Top Frame
1 (x1)
9
M8X20mm
Button Bolt (x4)
13 M8 Arc Wa-
sher (x4)
14
(7)
(7)
(13)
(14) (7)
(14)
(13)
Round hole
shorter side
shorter side
Round hole

9
STEP 6
STEP 7
M8X20mm
Button Bolt (x4)
M8 Arc Wash-
er (x4)
13 14
Now connect the Top Frame 2 (10) to the Joint (7)
on the remaining short side with four M8X20mm
Button Bolts (13) and four M8 Arc Washers (14) as
shown. The round holes in the Top Frame 2 (10)
should be facing up.
Attach the Curved Tube 1 (5) to the free side of the
Top Frame 2 (10) with four M8x20mm Button Bolts
(13) and four M8 Arc Washers (14) as shown.
M8X20mm
Button Bolt (x4)
M8 Arc Wash-
er (x4)
13 14
(5)
(5)
(10)
(5)
(10)
(13)
(13)
(14)
(14)
(13)
(13)
(14)
(10)
(14)
(7)
(7)
(7)
(10)
(10)
Shorter side
Top Frame
2 (x1)
10
Round hole
Round hole
(10)
Curved
Tube1 (x1)
5

10
ASSEMBLY
Curved Tube
Frame 2 (x2)
16
STEP 8 Attach Curved Tube Frame 2 (16) to each free end of
the Joint (7). Secure each tube with four M8x20mm
Button Bolts (13) and four M8 Arc Washers (14) as
shown (a total of eight M8x20mm Bolts and eight
M8 Arc Washers will be used.)
At this point in assembly, the hanging jungle line
should be able to stand on its own.
M8X20mm
Button Bolt (x8)
M8 Arc Wash-
er (x8)
13 14
(16)
(9)
(10)
(16)
(7) (7)
(14)
(13)
(13)
(13)
(13) (13)
(13)
(14)
(14)
(14)
STEP 9
4Ball Handle
Swing (x1)
2M8 Arc Washer
(x1)
M8 Lock-
nut (x1)
14 12
Attach a Ball Handle Swing (2) in the location
shown below by sliding it up through the bottom
of the Top Frame 1 (9) and securing at the top with
a M8 Arc Washer (14) and a M8 Locknut (12) as
shown.
(12)
(12)(14)
(14)
(2) (2) (2)
(9)

11
STEP 10
3M8 Arc Washer
(x2)
M8 Lock-
nut (x2)
14 12
Now attach a Gymnast Bar (3) next to the ball han-
dle swing (2) you just placed on the Top Frame 1 (9).
Use two M8 Arc Washers (14) and two M8 Locknuts
(12) to secure.
(3)
(3)
(3)
(9)
(9)
(9)
Gymnast Bar
(x1)
(12)
(14)
(2)
STEP 11
4Ball Handle
Swing (x1)
2M8 Arc Washer
(x1)
M8 Lock-
nut (x1)
14 12
(12)
(14)
(9)
(9)
(2)
(2)
Attach another Ball Handle Swing (2) to the Top
Frame 1 (9) with a M8 Arc Washer (14) and a M8
Locknut (12) as shown.

12
ASSEMBLY
STEP 12
Free Swinging
Ring (x1)
4M8 Arc Washer
(x1)
M8 Lock-
nut (x1)
14 12
(12)
(14)
(4) (4)
(9)
(9)
Now, attach a Free Swinging Ring (4) to the Top Frame
1 (9) with the M8 Arc Washer (14) and a M8 Locknut
(12) as shown.
(4)
(9)
STEP 13
M8 Washer
(x1)
M8 Lock-
nut (x1)
20 12
Tube Swinging
Ring (x1)
8
Attach the Swinging Tube (8) to the Joint (7) with
the M8 Washer (20) and the M8 Locknut (12) as
shown.
(12)
(20)
(7)
(8)

13
STEP 14
4Ball Handle
Swing (x1)
2M8 Arc Washer
(x1)
M8 Lock-
nut (x1)
14 12
Attach another Ball Handle Swing (2) to the Top
Frame 2 (10) with the M8 Arc Washer (14) and the
M8 Locknut (12) as shown.
(2)
(10)
(12)
(14)
(2)
(10)
(2)
(3)
(10)
(12)
(14)
STEP 15
4
3M8 Arc Washer
(x2)
M8 Lock-
nut (x2)
14 12
Attach a Gymnast Bar (3) to the Top Frame 2 (10)
with two M8 Arc Washers (14) and two M8 Lock-
nuts (12) as shown.
Gymnast Bar
(x1)

14
ASSEMBLY
STEP 16
4Ball Handle
Swing (x1)
2M8 Arc Washer
(x1)
M8 Lock-
nut (x1)
14 12
Now attach the last Ball Handle Swing (2) to the
Top Frame 2 (10) with the M8 Arc Washer (14) and
the M8 Locknut (12) as shown.
(12)
(14)
(2)
17
STEP 17
Free Swinging
Ring (x1)
4M8 Arc Washer
(x1)
M8 Lock-
nut (x1)
14 12
Finally, attach the second Free Swinging Ring (4) to
the Top Frame 2 (10) with the M8 Arc Washer (14) and
the M8 Locknut (12) as shown.
Now, all the hanging pieces are installed.
(12)
(14)
(4)

15
17
STEP 18
Upright (x2)
6
You will need another person for the next two
steps. Attach the two Uprights (6) to the Curved
Tube Frame 2 (16) in the middle of the Hanging
Jungle Line with four M8X20mm Button Bolts (13)
and four M8 Arc Washers (14).
M8X20mm
Button Bolt (x4)
M8 Arc Wash-
er (x4)
13 14
(6)
(6)
(16) (16)
(13)
(13)
(13)
(13)
(5)
(14)
(14)
(14) (14)

16
U Tube
(1) (15)
Inner Cap
Upright
(15)
(5)
(5)
(1) Monkey Bars
1 2
3
Hanging Bridge
ASSEMBLY
STEP 19
You will now need to remove the U Tube from your exisiting Hanging Bridge. After removing, keep the four
M8x65mm Button Bolts, four M8 Arc Washers and two M8 Locknuts from the U tube.
Now, insert the Curved Tube Frame (1) and the Curved Tube 2 (15) of the Hanging Jungle line to the top of
the Hanging Bridge where you just removed the U tube. Use the hardware you reserved to secure.
Now, remove the Inner cap from the Monkey Bars, keeping the two M8X65mm Button Bolts, two M8 Arc
Washers and the M8 locknut from the Monkey Bars. Insert the Curved Tube (5) of the Hanging Jungle Line
into the Monkey Bar. Secure with the reserved M8X65mm Button Bolts, two M8 Arc Washers and the M8
locknut as shown.
17
1
2
3

17
STEP 20
4Anchor (x2)
19
Place an anchor (19) through the foot of each foot of the middle support tubes.
Firmly push or hammer the anchors (19) into the ground. Take care that they are
not a tripping hazard.
Do not skip this step, the anchors (19) are used to prevent tipping, overturning,
or lifting of the support legs.
(19) (19)
(19)
(19)

18
STEP 21
Congratulations on completing your Activplay Hanging Jungle Line (See, we knew you could do it!) If you love
the product, we want to hear from you! Please leave us a review on the retailer’s site you purchased this
product from, on our Facebook page, or on any other review site. We’d really appreciate it. If we could, we’d
give you a gold star.
Are you frustrated or have some suggestions? Contact us directly. We promise we’re not trying to ruin your
life. We will do everything we can to make it right. See contact info on page 2-3.
ASSEMBLY

19
INSTALLATION
WARNING!
To reduce the risk of serious injury, read all important precautions and instructions in this manual and all warnings
on the Hanging Jungle Line before assembly and use of this product.
1. It is the responsibility of the owner and supervisors of this Hanging Jungle Line to make sure all users obey the
safety instructions printed in this material.
2. This product is intended for use by children ages 4-8.
3. Use the Hanging Jungle Line only as described in this manual.
4. Always use the Jungle Gym and its accessories under adult supervision.
5. Total weight capacity is 162 lbs.
6. Be sure that Jungle Gym and its accessories are on a level surface, not less than 6 ft (1.8m) from any structure
or obstruction such as a fence, garage, house, overhanging branches, laundry lines, or electrical wires.
7. Do not install over concrete, asphalt, packed earth, grass, carpet, or any other hard surface. The maximum fall
height for the product is 6.5 ft (2 m). A fall onto a hard surface can result in serious injury or death. The Jungle
Gym and its accessories should never be placed on a hard surface such as concrete or asphalt.
8. It is recommended that the Jungle Gym Set be anchored to the ground. Be certain that all anchoring devices are
placed below the level of the playing surface or below ground to prevent tripping. Anchors are sold separately.
9. It is recommended that the Jungle Gym and its accessories be placed on shock absorbing surface. Shredded
bark mulch, wood chips, fine sand or fine gravel are considered to be acceptable shock absorbing surfaces
when installed and maintained at a sufficient depth under and around Jungle Gym and its accessories.
10. Do not let children use equipment until properly assembled and anchored.
11. Always inspect the Jungle Gym and its accessories before use and replace any worn, defective, or missing
parts and tighten any bolts that have become loose. (Users may be hurt if the Jungle Gym is used when it is in
poor condition.)

20
MAINTENANCE & CARE INFORMATION
At the beginning of each play season:
• Tighten all hardware
• Lubricate all metallic moving parts
• Check metal parts for rust. If found, sand and repaint using a nonlead-based paint
• Reinstall any plastic parts, such as swing seats or any other items that were removed for the cold season
Twice a month during play season:
• Tighten all hardware
• Check all protective coverings on bolts, pipes, edges, and corners. Replace if they are loose, cracked, or
missing
• Rake and check depth of loose fill protective surfacing materials to prevent compaction and to maintain
appropriate depth. Replace as necessary
• Spot clean frame when dirt accumulates
Once a month during play season:
• Lubricate all metallic moving parts
• Check all moving parts including swing seats, ropes, cables, and chains for wear, rust, or other deterioration
and replace as needed
At the end of each play season or when the temperature drops below 32°F:
• Remove plastic swing seats and other items as specified by the manufacturer and take indoors or do not use
• Rake and check depth of loose fill protective surfacing materials to prevent compaction and to maintain
appropriate depth. Replace as necessary
• Owners shall be responsible for maintaining the legibility of the warning labels
Disposal Instructions: If discarding, disassemble and dispose of the Jungle Gym Base Station in such a way that no
unreasonable hazards will exist at the time the Jungle Gym Base Station is discarded.
If any these conditions exist, this product should be disassembled or otherwise protected
from being used until the condition is fixed.
Congratulations and high five on successfully assembling your new Skywalker Sports Jungle Gym Base and/or
accessories. Now, the best way to keep your new Skywalker Sports Jungle Gym Base and/or accessories in tip-top
shape, is to follow this checklist periodically: