Skywalker SEK1200 Quick guide

USER MANUAL
Skywalker Holdings LLC
P.O. Box 574, Brigham City, UT 84302
ASSEMBLY, MAINTENANCE, &
MODEL #SEK1200 / SEK1500
WARNING
Read all precautions and instructions in
this manual before using this equipment.
Save this manual for future reference.
Maximum user weight 200 lbs.

Part List...........................................................................................................................................................................3
Part Identification....................................................................................................................................................4
Exploded Drawing....................................................................................................................................................5
Enclosure Net Removal......................................................................................................................................6
Assembly...................................................................................................................................................................7-11
Other Accessories.................................................................................................................................................12
Limited Warranty......................................................................................................................................................13
TABLE OF CONTENTS
IMPORTANT
Trampolines and enclosures are susceptible
to winds. Be sure to secure your trampoline
and enclosure. Wind damage is not covered
in the warranty of your trampoline.
WARNING
CHOKING HAZARD- Small
parts not for children
under 3 years.
WARNING
Adult assembly required.
2
STOP EVERYTHING YOU'RE DOING AND REGISTER YOUR TRAMPOLINE
Find our warranty registration online by typing in: www.skywalkertrampolines.com/registration/
You'll need to have the following information handy:
• Name • Email address
• Address • Trampoline model number
• Phone number • Trampoline serial number
• Date of purchase • Retailer the trampoline was purchased from
HEY WE'VE GOT SOMETHING REALLY IMPORTANT TO SAY
And that is... check us out online! We've got assembly videos (for those of you who prefer movies over books), FAQs
(so you know you're not the only one who messed up), fascinating blog posts (did you know jumping burns more
calories than running?), and most importantly... find us on social media! Because we want to be your friend. We'd love
to hear from you, friend.
Website: skywalkertrampolines.com
Facebook: facebook.com/skywalkertrampolines
YouTube: youtube.com/c/SkywalkerTrampolines
Pinterest: pinterest.com/swtrampolines
Twitter: twitter.com/swtrampolines
Instagram: instagram.com/skywalker_trampolines

Key No. Qty. Description
1 1 Enclosure Net
2 6 Straight Tube
3 6 Curved Tube
4 12 Foam
5 6 End Cap
6 6 Self-tapping Screws
7 1 Screw Driver
# 1 User Manual & Safety Placard
# 1 Set of ASTM Labels
PART LIST
ORDERING REPLACEMENT PARTS
We get it... sometimes things happen. But the fun shouldn’t stop just because you need a new bolt or screw! To order
replacement parts, check out our website at: www.skywalkertrampolines.com or call our toll-free Customer Care
Hot-line at 1-866-603-Jump (5867), Monday - Friday, 8 a.m. until 5 p.m. Mountain Time (excluding holidays).
Our customer service team will ask you a few questions in order to get the replacement part sent out as soon as
possible. We’re not trying to complicate your life, we promise.
When calling, make sure to have the following information ready:
• The model # of the product (see the front cover of this manual)
• The key # and description of the part (see the part list above)
• The quantity needed (only you know the answer to that one!)
BEFORE YOU BEGIN
Thanks for choosing Skywalker Trampolines! We’re just as excited as you are to help your family live an active (but
most importantly FUN) lifestyle. This model is one of our favorites, and we’re confident you’ll love it too. To make
things easier for you, we’ve listed important information that you (and your little outdoor adventurers) need to know.
Make sure you brush up on the warnings, instructions, assembly, maintenance, and use of your new product...
because there will be a pop quiz at the end! (Okay, not REALLY, but if you’re still reading this, props to you! You’re
awesome). 3
Note: Pole caps and pole cap bolts are not included in this kit.

4
Before you begin, take a look at the drawings below to make sure you have all the parts! The numbers in the squares
to the left (key numbers) will help you identify the parts during assembly.
PART IDENTIFICATION
1Enclosure Net (x1) 2Straight Tube (x6) 3Curved Tube (x6)
4Foam (x12) 56
7
Self-tapping Screw
(x6)
End Cap (x6)
Screw Driver (x1)

EXPLODED DRAWING
5
(1)
(2)(4)
(4)
(4)
(4)
(4)
(4)
(6)
(6)
(6)
(6)
(6) (6)
(4)
(4)
(4)
(4)
(4)
(2)
(2)
(2)
(2)
(2)
(5)
(5)
(5)
(5)
(3)
(3)
(3)
(3)
(3)
(3)

ENCLOSURE NET REMOVAL
STEP 2
You’re now ready for the best (or worst depending on if you’re a pessimist) part of all... de-springing your
trampoline. You may want to use gloves for this step! Using the spring tool, hook the end of any spring that’s
attached to the frame. Pull back and stretch the spring until it’s free from the frame, and releases back to its
normal shape. Continue detaching springs until all have been removed, and set the springs aside. Now, all you
need to do is separate the jump mat from your old enclosure net, and you’re ready for assembly!
STEP 1
First thing’s first... you’ll need to remove the end caps from the bottom of the sockets, and pull upwards to take
down the enclosure poles. Helpful tip: When removing the enclosure poles, pull back on the middle of the poles!
Once the enclosure poles are down, unscrew the bolts in the pole caps to remove the enclosure net from the
pole caps. Next, all you’ll need to do is remove the frame pad, and place the frame pad, pole caps, and the
enclosure poles aside.
Socket
End cap
Bolt
Pole cap Frame pad
Enclosure pole
6

7
Warning label
First hole
First V-ring
1 2
3
4
STEP 2
You may want to use gloves for this step! Place the jump mat on clear ground inside the frame. Make sure the
two warning decals align with two T-joints! Using the spring tool, hook the smaller end of a spring into the
V-ring just left of the enclosure door. Stretch the free end of the spring until it reaches the frame hole just left
of the T-joint.
STEP 1
ASSEMBLY
Place the jump mat on the ground. The warning label should be on top, and
the ID label should be on back. Now place the enclosure net on the jump
mat, and make sure the first hole and the first V-ring line up. The first hole is
the hole to the left of the enclosure door zipper. The first V-ring is the V-ring
to the left of the warning label. Now insert the first V-ring into the first hole.
Then, insert the remaining V-rings into their corresponding holes.
Enclosure door
First V-ring
First hole
T-joint
T-joint Warning label
T-joint
Enclosure Net (x1)
1

8
STEP 3
Now, repeat step 2 on the other side of the trampoline. Make sure to count the exact number of V-rings and
frame holes so each one corresponds!
Next, place a spring into the V-ring just left of the nearest T-joint, and stretch the spring until it reaches the
frame hole just left of the T-joint. Now, repeat this step on the remaining T-joints.
STEP 4
Next, place springs into the V-rings just left of all the sockets, and stretch the springs until they reach the
frame holes just left of the sockets. Now, place one spring directly to the left of each spring already placed.
Continuing in a clock-wise direction, attach the remaining springs to the remaining V-rings and frame holes
until all springs have been placed.
T-joint
T-joint
Enclosure door
Socket
Enclosure door
ASSEMBLY

9
STEP 5
Now that you’ve installed the jump mat, place the frame pad on top of the springs. Adjust the frame pad so
that the slits are directly above the T-sockets. Important: Don’t use the trampoline without the frame pad. It’s
designed to protect your little jumpers! Trust us on this one. Next, find the straps that are attached to the
underside of the frame pad, and tie all of the straps in bows. (Because if you tie them in knots, you’ll have a
pretty hard time untying them ever again!)
Socket
Slit of Pad
Frame Pad
Inner strap
Underside of trampoline
Outer strap
STEP 6
If you want, take a snack break because you’re MORE THAN
HALFWAY DONE, and you deserve it. This next step is easy.
Just slide all the straight tubes (2) and curved tubes (3) into
foam (4). If you’re having trouble getting the foam over the
tubes, try adding a small amount of water inside the foam!
Straight
Tube (x6) Curved Tube (x6)
23Foam (x12)
4
(4)
(4)
(2)
(3)

10
STEP 7
Insert one straight tube (3) into one curved tube (4), and secure with one
self-tapping screw (6).Important: On the curved tube there is one end that
has two holes. Make sure that end is on top!
Repeat this step to attach the five remaining straight tubes and curved
tubes together.
Self-tapping Screws (x6)
6
(3)
(4)
(6)
Two holes
ASSEMBLY
STEP 8
Insert the pole caps into the strap rings found on the top of the net. Make sure the hexagon holes of the pole
caps are facing the net, and the regular holes are facing you. Next insert one of the enclosure poles into the
pole caps. Make sure the bent side of the enclosure poles are facing towards the center of the trampoline.
Make sure the holes on the poles, pole caps, and strap rings are all aligned. Then insert bolts to secure in place.
Important: Make sure the bolts go into the round holes (not the hexagon holes) or you could break the pole caps!
Hexagon hole
Regular hole
Strap
Bolt
Pole cap

11
STEP 9
Starting from the enclosure door, lift one of the assembled poles and insert the straight tube (9) into the
socket. Repeat this process to assemble the five remaining poles. Helpful tip: When inserting the enclosure
poles, pull back on the middle of the poles!
Then, insert the end caps into the bottom of the sockets.
Socket
Socket
Pull back
Socket
STEP 10
Congratulations on completing your new enclosure! (See... we knew you could do it!) So here comes the real
question... are you satisfied with this completed product? If you are, go ahead and write a review on the
retailer’s site you bought it from. We’d really appreciate it... and if we could, we’d give you a gold star. Are you
completely frustrated and have some choice words for us? Contact us directly! We’re not trying to ruin your
life, we promise. And we’ll do everything we can to make it right again. See contact info on page 2-3.

12
Thanks for purchasing your replacement part from Skywalker Trampolines! Check out some of the other accessories
we offer that will make your trampoline even more enjoyable!
Find us online for more details: www.skywalkertrampolines.com
OTHER ACCESSORIES
SKYWALKER TRAMPOLINES WEATHER COVER ACCESSORY
Protect your trampoline with the Skywalker Trampolines Weather Cover!
This cover fits 12’ or 15’ round trampolines, and the weatherproof vinyl-
coated material will help secure your trampoline during inclement weather.
A heavy-duty cord installed in the cover creates tension around the edge
of the trampoline to secure in place. Straps with clips easily hook onto the
V-rings of your trampoline for an extra measure of security. Drain outlets
on the surface of the weather cover prevent rain or snow buildup. The
Skywalker Trampolines Weather Cover is the perfect accessory to protect
your trampoline!
SKYWALKER TRAMPOLINES WIDE-STEP LADDER
Make your trampoline even more accessible with the Skywalker Trampolines
Wide-Step Ladder! This trampoline ladder is made of weather-resistant
galvanized steel, and easily hooks onto your trampoline for quick installation.
Extra-wide textured rungs prevent slipping, keeping your children safe. This
ladder is the perfect addition to any trampoline!
For an additional option, check out the Skywalker Trampolines 3-Rung Ladder!
SKYWALKER TRAMPOLINES LED LIGHT SLEEVE ACCESSORY
Now you can enjoy your favorite backyard games at night with the Skywalker
Sports LED Light Sleeve Accessory for Trampolines! This light sleeve easily
wraps around a variety of outdoor products including trampolines, patio
furniture, soccer goals, jungle gyms, and more! With an 8-hour battery life and
11 different light modes, you can keep the party going even after the sun goes
down. Light up your backyard with the Skywalker Sports LED Light Accessory
for Trampolines!
SKYWALKER TRAMPOLINES WIND STAKES - 4 PACK
Make your trampoline even more secure with Skywalker Trampolines Wind
Stakes! These four 12.5” long wind stakes are made of weather-resistant
galvanized steel, and will help stabilize your trampoline during strong winds and
storms. These wind stakes are the perfect addition to any trampoline!

13
Skywalker Holdings, LLC warrants its products to be free from defects in material and workmanship under normal
use and service conditions. The steel frame is warranted for three (3) years after the date of purchase. All other
parts are warranted for one (1) year after the date of purchase. Warranty coverage extends only to the original retail
purchaser from the date of original purchase. This warranty is only valid concerning products used for residential
use. Products used for commercial use, such as schools and daycares, will not be covered.
WHAT IS NOT COVERED?
LIMITED WARRANTY
Weather Damage: The warranty does not cover damage due to the effects or acts of nature, such as
earthquakes, wind, hurricanes, tornadoes, lightening, rain, fire, snow, excessive heat and cold conditions
and/or sun damage. During the winter months the trampoline soft materials will need to be removed and
stored in a dry place out of the snow. If left unprotected in the winter months, some components such as
springs, jump mat, spring pad and enclosure, may become damaged, voiding this warranty.
Fading and Rust: Our products are fully galvanized. Skywalker does not warranty against rust or
corrosion. Some areas may have higher air salt content, higher humidity, heavier rain and heavier snow.
Skywalker does not warranty against fading. We suggests customers use a UV protectant on the frame
pad to extend the life of the product.
Loss or damage to Product Due to: Loss or damage caused during shipping or caused by abuse, misuse,
improper or abnormal usage or authorized repair are not covered by this warranty and may also void the
warranty.
Unauthorized Replacement Parts: The warranty will become void if any defects or damages are
associated with the use of unauthorized replacement parts. All replacement parts must be obtained from
an authorized agent.
Assembly Service: The warranty does not cover acts or omissions provided by a third-party assembly
service. It is the customer’s responsibility to check all boxes and confirm all components are included and
in their proper condition before installation occurs.
INSPECTION AND REPLACEMENT PARTS:
1.
2.
3.
NOTE: All requested information must be provided in order to review your warranty claim.
To order replacement parts for your product please visit www.skywalkertrampolines.com
Skywalker Holdings, LLC, PO Box 574, Brigham City, UT 84302 USA.
Printed in China © 2018 Skywalker Holdings, LLC
Your trampoline SHOULD BE INSPECTED UPON UNPACKING AND SET UP AND THEREAFTER ON A REGULAR BASIS.
WORN, DAMAGED OR BROKEN PARTS SHOULD BE REPLACED IMMEDIATELY AND BEFORE USE.
Call the Skywalker Trampoline Customer Service Department at 1-866-603-5867 to file a warranty claim. Be
prepared to provide the following information: name, shipping address, a copy of your original sales receipt, a brief
description of the problem and cause, trampoline model number and serial number. We may also ask for photos of
the damaged/defective parts.
After reviewing your information and examining your photos, Skywalker Trampolines will make the determination if
this part is covered by this warranty. If so, a replacement part will be sent to you.

NOTE: SKYWALKER HOLDINGS, LLC IS NOT RESPONSIBLE OR LIABLE FOR INDIRECT, SPECIAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THE PRODUCT OR OTHER
DAMAGES WITH RESPECT TO ANY ECONOMIC LOSS, LOSS OF PROPERTY, LOSS OF REVENUE OR PROFITS, LOSS OF
ENJOYMENT OR USE, COST OF REMOVAL, INSTALLATION OR OTHER CONSEQUENTIAL DAMAGES. SOME STATES DO
NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. ACCORDINGLY, THE ABOVE
LIMITATION MAY NOT APPLY TO YOU.
THE WARRANTY EXTENDED HEREUNDER IS IN LIEU OF ALL OTHER WARRANTIES AND ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE IS LIMITED IN ITS SCOPE AND DURATION TO THE TERMS
SET FORTH HEREIN. SOME STATES OR COUNTRIES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY
LASTS. ACCORDINGLY, THE ABOVE LIMITATION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY STATE TO STATE OR COUNTRY TO COUNTRY.
THIS WARRANTY IS VALID ONLY IN THE COUNTRY THE PRODUCT WAS PURCHASED.