Smart view VX-8202F User manual

VIDEO MATRIX
(VX-8202F)
2 In 2 Out
(VX-8204F)
2 In 4 Out
(VX-8208F)
2 In 8 Out
USER MANUAL V1.2
VX-8202F / VX-8204F /
VX-8208F
Package Contents-
1 Smart View VX-8202F or VX-8204F or VX-8208F
video matrix
1 user manual
1 power adapter DC 12V
Any thing missed, please contact with your vendor.
Introduction
Through the video matrix VX-8202F, 8204F, 8208F, you can use
2 PCs to display the diverse images on 2,4,8, monitors;
meanwhile, optional means for controlling monitor’s image either
come from PC “A” or PC “B” or just switching off.
Video matrix is ideal for:
Test bench facilities
Data center
Help desks
Video broadcasting:
Presentation
Stock quotes
Timetables
Educational facilities
Features
Intelligent functionality.
With 250 MHz pixel frequency.
Extends the video signal up to 65 meter (213 feet).
Supports the DDC, DDC2, DDC2B. (For video out port 1 and
2)
Can be cascaded.
The output is compatible with standard VGA card.
Free select from PC ○
Aor PC ○ Bor switch off by means of
the front panel switch.
Specifications
Function VX-8202F VX-8204F VX-8208F
Video Input Connector
(HD-15 Female) 2 2 2
Video Output Connector
(HD-15 Female) 2 4 8
Select Switch 2 4 8
A (Green) 2 4 8
Linked LEDs B (Red) 2 4 8
Max. Resolution 1920 x 1440 60 Hz
Pixel Frequency 250 MHz
Cable Distance
(Device to Monitor) 65m (213 feet) Max.
Signal Type VGA, SVGA, XGA, Multisync
Power Adapter (Min.) DC 12V
Housing Metal
Weight 420 g 455 g 680 g
Dimensions (LxWxH) mm 130x75x42 200x75x42
-1-
Technical Specifications
Input/Output Signal
Pin # Signal Pin # Signal
1 Red video 9 NC
2 Green video 10 Ground
3 Blue video 11
ID0 ﹡
4 ID2 ﹡12
ID1 ﹡
5 Ground 13 Horizontal sync
6 Analog ground 14 Vertical sync
7 Analog ground 15
ID3 ﹡
8 Analog ground
﹡For video out port 1 and 2.
FRONT VIEW
1. Select
2. ○
A,○ BLinked
REAR VIEW
1. Input Power Jack
2. ○
A,○ B“Video In” Port
3. “Video Out” Port
*There are 2/4/8 ports for VX-8202F / VX-8204F /
VX-8208F
-2-

Installation
1. Turn off the PCs and monitors.
2. Connect the HD-15 video extension cable between the
VGA card of PCs and the “Video In” ports of video
matrix.
3. Connect the HD-15 video extension cables between the
monitors and the “Video Out” ports of video matrix.
4. Connect the power cord and turn on the video matrix.
5. Turn on the PCs and monitors.
6. Control front panel switch to obtain the image either
come from PC ○
A(Linked LED “○ A” on) or PC ○ B
(Linked LED “○
B” on) or just switching off. (Linked LED
“○
A○ B” off)
Note:
All the “Video Out” ports will connect with the “Video In”
port of ○
Awhile turning on the video matrix.
If you install the DDC monitor for the video matrix, the
rest of monitors must be the same resolution as the DDC
monitor.
Through the functionality of DDC monitor, the “Video In”
port of ○
Awill connect with the “Video Out” port 1 and
the “Video In” port of ○
Bwill connect with the “video out”
port 2.
Available monitors include the VGA, SVGA, XGA,
Multisync, and exclude the CGA, EGA, Mono.
Operation for cascade:
1. The function to display image on more monitors, you
request to attach another video matrix or the standard
video splitter.
2. Connect the HD-15 male/male video extension cable
between the “Video Out” port of the former video matrix
and the “Video In” port of the latter video matrix.
Note:
Even though you are allowed to cascade the video matrix
with varied ports, the image might become unstable if
cascade too many tiers of video matrixes.
-3-
P.S.: The example cascades the 4 and 8 ports video matrix;
however, you can cascade the video matrix with demanded
port.
© C&C TECHNIC TAIWAN CO., LTD. All rights reserved.
Trademarks:
All the companies, brand names, and product names
referred to this manual are the trademarks or registered
trademarks belonging to their respective companies.
-4-