Smarter SMART MIG-250 User manual

IMPORTANT
Read this Owner's Manual Completely before attempting to use this equipment. Save
this manual and keep it handy for quick reference. Pay particular attention to safety
instructions we have provided for your protection. Contact your distributor if you do not
fully understand this manual.
OPERATORS' MANUAL
HIGH TECH PROFESSIONAL MIG/MAG MACHINE
SMART MIG-250
SMART MIG-350
RoHS
C O M P L A N T
www.smarter-welding.com
CHINA:
USA
BRASIL
ADD.:Chengxi Industrial Zone, Wenling City,
Zhejiang Province, China
PC.:317525
URL:www.smarter-welding.com
Sales Department
Tel:[phone] 86191296
Fax:[phone] 86901116
E_mail:[email protected]
Wenling Wanshun Electromechanics
Manufacture Co.,Ltd.
12195 Harley Club Drive
Ashland, VA 23005
Tel:[phone]
Fax:[phone]
E-mail:[e-mail]
URL:www.usesmartertools.com
RUA DR OLIMPIO CARR RIBEIRO 26 ,
VILA CALIFORNIA C.E.P 04775-120 S PAULO SP BRASIL
URL:www.smarter-welding.com
www.smarterbrasil.com.br
Tel:[phone].3433-0076.3433-1890
GSM:96831-0180. (51)8156-2026
E-mail:[email protected]

CONTENT
TERMS OF PRODUCT GUARANTEE SMARTER 12
8
10

U1=400V
U1=400V
U1=230V

INSTALLATION/OPERATING
4 rolls motor

HIGH TECH PROFESSIONAL MIG/MAG MACHINE
12
TERMS OF PRODUCT GUARANTEE SMARTER
All products are guaranteed for SMARTER 12 months. The warranty is for manufacturing
defects detected upon receipt of the products.
The warranty is for manufacturing defects detected upon receipt of the products.
SMARTER reserves the right to alter the characteristics lawful general, technical, and
aesthetic improvements to its products at any time without concern the obligation to make
the same products in stock or have sold it.
Depending on the severity and extent of the problem SMARTER may choose to repair the
equipment or replace the defective product for new equipment.
The exchange of defective equipment manufacturing, have assured their warranty for
replacement or maintenance free, only at Authorized Technical Service and inside of the
guarantee deadlines.
To repair done where the machine is installed, will be charged a travel fee.
The SMARTER product warranty does not cover the following situations:
- Wear on the finish, parts and / or parts damaged by heavy use or exposure to adverse
conditions and unforeseen (rain, extreme humidity, high temperatures, freezing
temperatures).
- Damage caused during transport and assembly of the product, if they have not been
implemented by the company or professional designated by the company SMARTER.
- Misuse, undue effort or use different from that proposed by the company for each
product. Defects caused by attrition or institutional use for products that are not explicitly
indicated for this purpose.
- Problems caused by not fitting in accordance with the instructions in the manual, or
related to adaptations or alterations to the product.
- Mistreatment, neglect, cleaning or maintenance contrary to the instructions passed by the
company.
- Damage caused by repairs hired by the consumer and not by the SMARTER Authorized
Technical Service.
- Damage caused by accidents, falls, short circuits, lightning, improper connection to
power sources, flood and other natural phenomena, pest attacks or natural, are not
covered by warranty

HIGH TECH PROFESSIONAL MIG/MAG MACHINE
13
Buyer
Address
Telephone
E mail
Distributor
Purchasing Date
Product
Mobile
Identification requirement
Stamp and
Signature