SMATE SM1UHDSE55 User manual

SMART MATE
ELED UHD
SMART TV
OPERATIONS
MANUAL
For use with models: SM1UHDSE55,
SM1UHDSE49
For support please contact us at
[e-mail]
www.smate.com.au
SMATE
Smart Mate
Experience
reality at its
best!
Entertaining
Australia!

-1-
© SMATE
Table of Contents
Table of Contents ............................................................................................................................................1
Declaration.......................................................................................................................................................2
SAFETY INSTRUCTIONS ................................................................................................................................5
SAFETY INSTRUCTIONS ................................................................................................................................6
IMPORTANT INFORMATION ..........................................................................................................................8
Television Antenna Connection Protection .................................................................................................8
Attaching or Removing the Stand .................................................................................................................9
Identifying Front and Rear Panel ................................................................................................................10
Front View ......................................................................................................................................................10
Rear View Mounting Pattern ........................................................................................................................11
Side Control Buttons.....................................................................................................................................12
Rear View Connections ................................................................................................................................13
Installing Batteries to the Remote Control ................................................................................................15
TV Remote Control ........................................................................................................................................17
Smart TV Operations ....................................................................................................................................21
Traditional TV Operations ............................................................................................................................29
How do I clean the TV? .................................................................................................................................53
Troubleshooting ............................................................................................................................................54
Specifications ................................................................................................................................................58
Support ...........................................................................................................................................................60

-2-
© SMATE
Declaration
Any content and service accessed through this device, while only intended for individual non-
commercial use, shall be the property of the applicable third party and subject to protection by
regulations and laws on copyright, patent, trademark and other intellectual property rights. No
part of such content and service may be modified, duplicated, published, uploaded, distributed,
translated, marketed, or used to make and distribute products derived from it without the prior
permission of the content owner or service provider. You acknowledge and agree explicitly
that you will solely bear the risk associated with the use of this device, and further you will
solely bear any risk related to satisfactory quality, performance and accuracy for any content
and service accessed through this device. To the maximum extent permitted by applicable law,
this device and any third party’s content and service is provided as it is without any guarantee,
express or implied. Manufacturer hereby declare explicitly that Manufacturer shall not be held
liable for any guarantee and conditions, express or implied, related to this device and any
content and service, including but not limited to warranty on marketability, satisfactory quality,
fitness for a particular purpose, accuracy, quiet use and non-violation of any third party’s rights;
to the maximum extent permitted by applicable law, Manufacturer gives no guarantee on the
accuracy, validity, timeliness, legitimacy and completeness of any content or service provided
through this device, or the fitness of such device, content or service for your particular
requirement, or the protection from interruption and error during operation of such device,
content or service; to the maximum extent permitted by applicable law, in any case, including
fault or neglect, Manufacturer shall not be held liable for legal actions or indemnity obligation
arising from any consequence as a result of or related to any information loaded in this device
or use of such device, content or service by you or any third party . Any content and service
provided as it is together with this device shall be the property of the applicable third party,
therefore Manufacturer gives no declaration or warranty on modification, suspension,
cancellation, termination or abortion thereof, and shall not be held liable for legal actions or
indemnity obligation arising thereof. Manufacturer reserves the rights to restrict the use or
access of certain content or service. As the content and service are transmitted through third
party’s network and transmission facilities, Manufacturer undertakes no customer service
thereof or the obligation for such customer service.
This symbol alerts user about the presence of a dangerous voltage not isolated inside the
product which can be sufficiently powerful to constitute a risk of electrocution. Do not open the
back cover. In no case the user is allowed to operate inside the TV set. Only a qualified
technician is entitled to operate. This symbol alerts user about the presence of important
operating instructions and maintenance in the document enclosed in the package.
ATTENTION RISK OF SHOCK ELECTRIC Packaging and electrical goods should be
recycled appropriately, and not treated as household waste. Please dispose of this equipment

-3-
© SMATE
at your applicable collection point for the recycling of electrical & electronic equipment waste.
By ensuring the correct disposal of this product, you will help prevent potentially hazardous to
the environment and to human health, which could otherwise be caused by unsuitable waste
handling of this product. The recycling of materials will help conserve natural resources.
Please do not therefore dispose of your old electrical and electronic equipment with your
household waste. For more detailed information about recycling of this product, please contact
your local city office, your household waste disposal service or the shop where you purchased
the product.
Positioning: If a television is not positioned in a sufficiently stable location, it can be
potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by
taking simple precautions such as:
• Using cabinets or stands recommended by the manufacturer of the television.
• Only using furniture that can safely support the television.
• Ensuring the television is not overhanging the edge of the supporting furniture.
• Not placing the television on tall furniture (for example, cupboards or bookcases) without
anchoring both the furniture and the television to a suitable support.
• Not standing the televisions on cloth or other materials placed between the televisions and
supporting furniture.
• Educating children about the dangers of climbing on furniture to reach the television or its
controls.
Important Safety Precautions: Please read the following safeguards for your TV and retain
for future reference. Always follow all warnings and instructions marked on the television.
1. A note about safety and operating instructions Read and follow all safety and operating
instructions, and retain them safely for future reference.
2. Heed Warnings: Adhere to all warnings on the appliance and in the operating instructions.
3. Cleaning: Unplug the TV from the wall outlet before cleaning. Do not use liquid, abrasive,
or aerosol cleaners. Cleaners can permanently damage the cabinet and screen. Use a lightly
dampened cloth for cleaning.
4. Wall Bracket: Wall brackets are not supplied with this product. After market brackets may
be available to purchase locally. Please refer to the specification page for dimensions.
5. Water and Moisture: Avoid dripping or splashing of liquids onto the product. Objects filled
with liquids, such as vases, should not be placed on the product.
6. Setting: Do not place this TV on an unstable cart, stand or table. Placing the TV on an
unstable base can cause the TV to fall, resulting in serious personal injuries as well as
damage to the TV. Use only a cart, stand, bracket or table recommended by the manufacturer
or salesperson.
7. Ventilation Slots: and openings in the cabinet are provided for ventilation, to ensure
reliable operation of the TV and to protect it from overheating. Do not cover the ventilation
openings in the cabinet and never place the set in a confined space such as built-in cabinet
unless proper ventilation is provided. Leave a minimum 10cm gap all around the unit, the rear
of the TV should be 6cm away from the wall.
8. Power Source: This TV should be operated only from the type of power source indicated
on the marking label. If you are not sure of the type of power supplied to your home, consult
your appliance dealer or local power company.
9. Power-Cord Protection: Power- supply cords should be routed so that they are not likely
to be walked on or pinched by items placed upon or against them, paying particular attention
to cords at plug, wall outlets, and the point where they exit from the TV. MAIN plug is used as
the disconnect device, the disconnect device shall remain readily operable.
10. Lightning: For added protection for this TV during a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it from the wall outlet and disconnect
the antenna or cable system. This will prevent damage to the TV due to lightning or power-line
surge.

-4-
© SMATE
11. Power Lines: An outside antenna system should not be located in the vicinity of overhead
power lines or other electric light or power circuits, or where it can fall into such power lines or
circuits. Where installing an outside antenna system, extreme care should be taken to keep
from touching such power lines or circuits as contact with them might be fatal.
12. Overloading: Do not overload wall outlets and extension cords as this can result in a risk
of fire or electric shock.
13. Object and Liquid Entry: Never push objects of any kind into this TV through openings
as they may touch dangerous voltage points or short-out parts that could result in fire or
electric shock. Never spill liquid of any kind on or into the TV.
14. Outdoor Antenna Grounding: If an outside antenna or cable system is connected to the
TV, be sure the antenna or cable system is grounded so as to provide some protection against
voltage surges and built-up static charges.
15. Servicing: Do not attempt to service this TV yourself as opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all servicing to qualified service
personnel.
16. Damage Requiring Service: Unplug the TV from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
(a) When the power - supply cord or plug is damaged.
(b) If liquid has been spilled, or objects have fallen into the TV.
(c) If the TV has been exposed to rain or water.
(d) If the TV does not operate normally by following the operating instructions. Adjust only
those controls that are covered by the operating instructions as an improper adjustment of
other controls may result in damage and will often require extensive work by a qualified
technician to restore the TV to its normal operation.
(e) If the TV has been dropped or the cabinet has been damaged.
(f) When the TV exhibits a distinct change in performance - this indicates a need for service.
17. Replacement Parts: When replacement parts are required, be sure the service technician
has used replacement parts specified by the manufacturer or have the same characteristics as
the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.
18. Safety Check: Upon completion of any service or repair to the TV, ask the service
technician to perform safety checks to determine that the TV is in safe operating condition.
19. Heat: The product should be situated away from heat s sources such as radiators, heat
registers, stoves, or other products (including amplifiers) that produce heat.

-5-
© SMATE
SAFETY INSTRUCTIONS
Electrical safety is of upmost importance and all precautions must be adhered to
avoid any unsafe situations. This product has been engineered and manufactured
with the highest priority on safety. However, improper use can result in electric
shock and / or fire. In order to prevent potential danger, please observe the
following instructions when installing, operating and cleaning the product. To
ensure your safety and prolonging the service life of your ELED Television, please
read the following precautions carefully before using the product.
1. Heed all warnings.
2. Follow all instructions.
3. Do not use this apparatus near water.
4. Clean only with dry cloth.
5. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
6. Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.
7. Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade and the third
prong are provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
8. Protect the power cord from being walked on or pinched particularly at the
plugs, convenience receptacles, and the point where they exit from the
apparatus.
9. Only use attachments/accessories specified by the manufacturer.
10. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.
11. Unplug this apparatus during lightning storms or when unused for long periods
of time.
Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally, or has been dropped.

-6-
© SMATE
SAFETY INSTRUCTIONS
This product is designed and manufactured to operate within defined design limits, and misuse
may result in electric shock or fire. To prevent the product from being damaged, the following
rules should be observed for the installation, use and maintenance of the product. Read the
following safety instructions before operating the display. Keep these instructions in a safe
place for future reference.
To avoid the risk of electric shock or
component damage, switch off the power
before connecting other components to
the TV.
Unplug the power cord before cleaning
the TV. Please use the included custom
bezel cleaning cloth for cleaning the bezel
of the TV only. Do not use a liquid or a
spray cleaner for cleaning the product. Do
not use abrasive cleaners.
Always use the accessories
recommended by the manufacturer to
insure compatibility.
When moving the TV from an area of low
temperature to an area of high
temperature, condensation may form on
the housing. Do not turn on the TV
immediately after this to avoid causing fire,
electric shock or component damage.
Do not place the TV on an unstable cart,
stand, or table. If the TV falls, it can injure
a person and cause serious damage to
the appliance. Use only a cart or stand
recommended by the manufacturer or
sold with the TV.
Any heat source should maintain a
distance of at least 5 feet away from the
TV, i.e. radiator, heater, oven, amplifier
etc. Do not install the product too close to
anything that produces smoke or moisture.
Operating the product close to smoke or
moisture may cause fire or electric shock.
Slots and openings in the back and
bottom of the cabinet are provided for
ventilation. To ensure reliable operation of
the TV and to protect it from overheating,
be sure these openings are not blocked or
covered. Do not place the TV in a
bookcase or cabinet unless proper
ventilation is provided.
Never push any object into the ventilation
slots of the TV. Do not place any objects
on the top of the Product. It could short
circuit parts causing a fire or electric
shock. Never spill liquids on the TV.
Do not use the TV in a portrait format (by
rotating 90 degrees) under high
temperature environment (25°C or higher),
since this would retard heat dissipation
and would eventually damage the TV.
The TV should be operated only from the
type of power source indicated on the
label. If you are not sure of the type of
power supplied to your home, consult
your dealer or local power company.
The power cable must be replaced when
using different voltage from that specified
in the User Manual. For more information,
contact your dealer.
The TV is equipped with a three-pronged
grounded plug, a plug with a third
(grounding) pin. This plug will fit only into
a grounded power outlet as a safety
feature. If your outlet does not
accommodate the three-wire plug, have
an electrician install the correct outlet, or
use an adapter to ground the appliance
safely. Do not defeat the safety purpose
of the grounded plug.
Do not overload power strips and
extension cords. Overloading can result in
fire or electric shock.
The wall socket should be installed near
the equipment and should be easily
accessible.
Only the marked power source can be
used for the product. Any power source
other than the specified one may cause
fire or electric shock.

-7-
© SMATE
Do not touch the power cord during
thunderstorms. To avoid electric shock,
avoid handling the power cord during
electrical storms.
Unplug the unit during a lightning storm or
when it will not be used for a long period
of time. This will protect the TV from
damage due to power surges.
Do not attempt to repair or service the
product yourself. Opening or removing the
back cover may expose you to high
voltages, the risk of electric shock, and
other hazards. If repair is required, please
contact your dealer and refer all servicing
to qualified service personnel.
Keep the product away from moisture. Do
not expose this appliance to rain or
moisture. If water penetrates into the
product, unplug the power cord and
contact your dealer. Continuous use in
this case may result in fire or electric
shock.
Do not use the product if any abnormality
occurs. If any smoke or odor becomes
apparent, unplug the power cord and
contact your dealer immediately. Do not
try to repair the product yourself.
Avoid using dropped or damaged
appliances. If the product is dropped and
the housing is damaged, the internal
components may function abnormally.
Unplug the power cord immediately and
contact your dealer for repair. Continued
use of the product may cause fire or
electric shock.
Do not install the product in an area with
heavy dust or high humidity. Operating
the product in environments with heavy
dust or high humidity may cause fire or
electric shock.
Hold the power connector when removing
the power cable. Pulling the power cable
itself may damage the wires inside the
cable and cause fire or electric shocks.
When the product will not be used for an
extended period of time, unplug the power
connector.
To avoid risk of electric shock, do not
touch the connector with wet hands.
Insert batteries in accordance with
instructions while using the remote control.
Incorrect polarities may cause damage
and leakage of the batteries, operator
injury and contamination the remote
control.
If any of the following occurs please
contact the dealer:
oThe power connector fails or frays.
oLiquid sprays or any object drops
into the TV.
oThe Display is exposed to rain or
other moisture.
oThe Display is dropped or damaged
in any way.
oThe performance of the Display
changes substantially.
Operating environment: Temperature: 5°C
~ 35°C, Humidity: 10% to 90% non-
condensing, Altitude: 0~10,000 ft.

-8-
© SMATE
IMPORTANT INFORMATION
Television Antenna Connection Protection
External Television Antenna Grounding
If an outside antenna or cable system is to be connected to the TV, make sure that the
antenna or cable system is electrically grounded to provide some protection against voltage
surges and static charges. Article 810 of the National Electrical Code, ANSI/NFPSA 70,
provides information with regard to proper grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna discharge unit, size of the grounding conductors,
location of antenna discharge unit, connection to grounding electrodes, and requirements of
the grounding electrode.
Lightning Protection
For added protection of the TV during a lightning storm or when it is left unattended or unused
for long periods of time, unplug the TV from the wall outlet and disconnect the antenna or
cable system.
Power Lines
Do not locate the antenna near overhead light or power circuits, or where it could fall into such
power lines or circuits.

-9-
© SMATE
Attaching or Removing the Stand
WARNING: FOR SAFE INSTALLATION OF THE TV, IT’S BEST TO ENGAGE OUR
PROFESSIONAL INSTALLERS. THE ELED FRAME IS DESIGNED VERY THIN AND IT
REQUIRES UTMOST SAFE INSTALLATION PROCEDURE. PLEASE ENSURE THE
PANEL IS NOT IMPACTED, PRESSED ON OR FORCE IS APPLIED WHILST INSTALLING
OR HANDLING OF THE TV. TAKE UTMOST CARE AND PRACTICE SUCH AS A TWO
PERSON LIFT AND INSTALLTION FOR ANY HANDLING OF THE TV. ANY DAMAGE TO
THE PANEL AS A RESULT OF UNSAFE HANDLING IS NOT COVERED UNDER THE
WARRANTY.
To attach the stand, place the display unit flat on a table. Afterwards match the 4 pins on the
neck to the 4 pin holes on the stand.

-10-
© SMATE
Identifying Front and Rear Panel
Front View
INDICATOR LIGHT –The light is red when power is plugged in but the TV is not turned on.
The light turns blue when the TV is turned on. Because of the LED in the panel, the TV
might take 10 –12 seconds to power on.
REMOTE SENSOR –When the remote control is under RF mode, the remote sensor receives
RF signals from the remote control.

-11-
© SMATE
Rear View Mounting Pattern
Mounting Specification: 300mm x 300mm using screw size M4. Length of screw should not
exceed 8mm.
Please Note: The 8mm length of screw refers to how deep the screw can go inside the
mounting holes. When you’re buying screws, you should add the original 8mm to the
thickness of your mounting plate in order to get the total screw length.

-12-
© SMATE
Side Control Buttons
1. INPUT –This button switches between all the different sources of the TV. When the
OSD is active, this button acts as the enter button and confirms the menu selection.
2. MENU –This button activates the On Screen Display (OSD). If a sub-menu is active,
pressing this button will exit the OSD.
3. V+ –This button increases the TV’s volume. If a sub-menu is active, pressing this button
will move the select right.
4. V- –This button decreases the TV’s volume. If a sub-menu is active, pressing this button
will move the selection left.
5. P+ –This button changes the TV channel up. If the OSD is active, this button functions
as up for the menu.
6. P- –This button changes the TV channel down. If the OSD is active, this button
functions as down for the menu.
7. POWER –Turn on the TV by pressing the button once. Press the button again to turn off
the TV.

-13-
© SMATE
Rear View Connections
1. MINI AV-OUT
This connection port is used for Mini AV-OUT cable.
2. Rj45 - This connection port is used for Ethernet.
3. HDMI1 ARC–IN –HDMI ARC (Audio Return Channel), for TV digital audio output,
you can connect the same support for the ARC function of the amplifier, the TV
sound to the amplifier. HDMI connects to devices that use HDMI cable, such as Blu-
ray or HD DVD player, or HD cable / satellite set-top box. This connection port
receives pure digital audio and high definition signal through one single cable. This
port can also accept a HDCP video device for video.
4. HDMI2 & HDMI3 - HDMI connects to devices that use HDMI cable, such as Blu-ray
or HD DVD player, or HD cable / satellite set-top box. This connection port receives
pure digital audio and high definition signal through one single cable. This port can
also accept a HDCP video device for video.

-14-
© SMATE
5. VGA-IN - This connection port connects to a PC for video using VGA cable. Be sure
to connect your audio cable to the VGA Stereo input if you want sound out of VGA
video source.
6. PC Audio IN- This connection port is to provide audio to the TV when using a PC or
a DVI video device. The sources use 3.5mm mini-jack audio cable.
7. RF-IN –Connect to Tuner. This connection is for digital or analog cable without the
cable box or over-the-airwave antennas. The tuner is a hybrid tuner that tunes to
both analog and digital channels. This connection uses coaxial RF cable.
8. USB1 –IN –USBS2.0, USB connects to USB flash drives for playing music and
picture. The USB port is also used for updating the TV’s firmware.
9. USB2 –IN –USB2.0, USB connects to USB flash drives for playing music and
picture. The USB port is also used for updating the TV’s firmware.
10. Earphone-Out –Connect to 3.5mm mini-jack audio cable, for sound from TV.
11. SD-CARD-IN –Supports up to 128GB SD card.
12. YPBPR-IN - This connection port is used for mini YPBPR input cable.
13. AV-IN, AV Audio (L) –IN & AV Audio (R)-IN -- Video connects to devices that use
composite video cables such as VCR or DVD player or Wii™. Connect the yellow
for video and the red / white for audio. This port shares the audio jacks with YPBPR.
14. Coaxial Out - This connection port is used for sending out digital audio signals to
digital surround sound receivers. The orange (COAX SPDIF OUT) connector sends
out either bit-stream or PCM digital sound signal to a home theater receiver with
digital coax input.
Please Note:
This TV features a power saving function which will turn off the TV
automatically after 10 minutes of idling on a connection with no signal. This
feature is present on all connection.

-15-
© SMATE
Installing Batteries to the Remote Control
Please insert AAA batteries into the remote control. Make sure the (+) side and the (-) side are installed
correctly. When you are installing the battery, the remote’s backside should be facing up.After
installing the batteries correctly, please re-attach the battery cover.
Please note:
Only use AAA batteries.
Inserting the batteries incorrectly may also result in cracking or leakage that may pose a fire risk or
lead to personal injury.
Dispose the batteries in accordance with local laws and regulations.
Keep the batteries away from children and pets.
If the remote control is not used for a long time, remove the batteries.
Keep the remote control away from moisture, sunlight, and high temperatures.

-16-
© SMATE
Using the Remote Control
To use the remote control, point it towards the remote sensor at the front of the TV.
The remote control has a range of up to approximately five metres (5m) from the TV at an
angle of up to 30 degrees each to the right and left of the sensor.
The remote control will not operate if its path is blocked.
NOTE:
Do not drop, step on or otherwise impact the remote control as this may damage the parts
or lead to a malfunction.
The operating distance may vary according to the brightness of the room.
Do not point bright lights at the remote control sensor.
Do not place objects between the remote control and the remote control sensor.
Do not use this remote control while simultaneously operating a remote control of other
devices.
Remote Control Preparation
Install the batteries in the back of the remote control, ensuring to match up the polarity
markings (+/-).
The batteries should last for around one year. The service life of the batteries will depend
on how often they are used.
If the remote control does not work when operated near the TV, replace the batteries.
NOTE:
Remove the batteries if the remote control is not going to be used for a long time.

-17-
© SMATE
TV Remote Control
This remote control is actually an air mouse, which has combined mouse
function and traditional remote control function.

-18-
© SMATE
It has two operating modes, one is 2.4G, for which you need to insert the USB
receiver provided into the TV USB port; the other is RF mode, which is as per
traditional TV remote control.
1. POWER –Turns the TV on or off (standby).
2. LED light - Toshow the mode: in 2.4G or in RF.
3. -- Fast forward
& INDEX- Press to display index page from Teletext mode.
4. -- Previous Track
& HOLD- Press to hold the current Teletext page.
5. -- Rewind
& TTX - Press to enter or exit from Teletext mode.
6. –Next Track
& SIZE- Press this button to select the Teletext size.
7. INFO -- Shows the display info.
8. TIMESHIFT –Recording in time shift.
9. -- Stop or Play
& REC- Recording function under DTV mode.
10. PVRLIST: List of recording content.
11. MENU: Press to display/close the menu.
12. -- Return button: back to previous page on Smart TV-Android System.
13. VOLUME UP/DOWN BUTTONS: Press to adjust the volume.
14. -- Home button: back to launcher page.
15. -- MUTE button: Press to mute or restore the TV sound.
16. CURSOR BUTTON & OK BUTTON: Direction button for selecting up/down/left/right
& Press to confirm and execute the selection.

-19-
© SMATE
17. NUMBER BUTTONS: Press to enter a channel number.
18. CHANNEL UP/DOWN BUTTONS: Press to select memorized TV programs.
19. SOURCE BUTTON: Press to choose input source.
20. ARROW CURSOR BUTTON: Press to show/close the arrow cursor.
21. EPG BUTTON: Press to show EPG information
& pressing it will take back to DTV mode from smart mode.
22. P.MODE BUTTON: Selects various preset picture settings.
23. S.MODE BUTTON: Selects various preset sound settings.
24. FAV BUTTON: Press for favorite channel
& Press for 3 seconds, to switch modes between 2.4G and RF
25. RETURN BUTTON: Return to the previous channel.
26. Special functions (see the prompt in the OSD)
Remarks:
1. The air mouse is defaulted to 2.4G mode. The LED light is off when it's on 2.4G mode.
When a button is pressed, the LED will light up.FAV button, is to switch the modes
between 2.4G and RF. Pressing FAV button for 3 seconds, will switch to RF mode. When
in RF mode, the LED light is always on. When a button is pressed, the LED light will be
turned off. And when the air mouse is not used for 20 seconds, it goes into standby mode
and the LED light is turned off. Press any button, to wake the air mouse in any mode.
2. Special Buttons instruction:
(1) - 2.4G and RF, switching key, pressing for 3 seconds, will change the
mode.
(2) - back to DTV mode. When in app or internet, mode pressing EPG button
will exit and revert to DTV mode.
(3) - arrow cursor. When this button is pressed, the arrow cursor will appear and
when pressed again, it will disappear.
(4) - home button. Press it to take to smart mode launcher page.