SolarMax INM Series Datasheet

1© SolarMax LED, Inc. 2022. All rights reserved.
Spec Sheet is subject to change without notice.
Rev. date: 2022-11-03
[e-mail]
T: 951-300-0788 ■ F: 909-595-7388
3080 12th St., Riverside, CA 92507
www.solarmaxled.com
INM Series LED HIGH MAST LIGHTING
INSTALLATION INSTRUCTION GUIDE
IMPORTANT SAFEGUARDS
Read these instructions completely and carefully before proceeding
with installation or service maintenance of this product:
• To avoid the possibility of electric shock, turn o power supply before installation/servicing.
• Inspect this properly packaged product for any damage that may have occurred during transit.
• Verify product application complies with manufacturer design recommendations.
• Verify the availability of necessary tools and incidental material.
• Verify applicable code requirements. Field assembly and installation are subject to acceptance by local inspection authority.
• Appropriate safety equipment to be determined by end user, per applicable safety standards and precautions.
• SolarMax LED is not responsible for any damages caused by parts/components that are not supplied by SolarMax LED.
1
STEP 1
Fixture body adjustable angle: -5°, 0°, +5°
1
STEP 2
Fits outside diameter (OD) from 1-5/8” to 2-3/8” round pole
2
STEP 4
Diagram of step angle
4
STEP 3
Tools and accessories
3
Adjustable Angle Installation
1-5/8” Round Pole
2-3/8” Round Pole
Hoop
Lamp Pole Fixing Bracket
Screw
Hoop
Outer Hex Bolt
Flat Gasket
Spring Washer
Wrench
Cross Screwdriver
Torque Wrench

2© SolarMax LED, Inc. 2022. All rights reserved.
Spec Sheet is subject to change without notice.
Rev. date: 2022-11-03
[e-mail]
T: 951-300-0788 ■ F: 909-595-7388
3080 12th St., Riverside, CA 92507
www.solarmaxled.com
INM Series LED HIGH MAST LIGHTING
INSTALLATION INSTRUCTION GUIDE
1
STEP 1
When installing OD
1-5/8” or 2-3/8” lamp
pole, take down the
xing bracket o the
round pole rst.
1
STEP 2
Loosen the four
(4) hoop screws
without removing
them.
2
STEP 4
Lock the hoop screws and complete the installation
(torque of 6-8N.m).
4
STEP 3
Connect the wires between the pole and xture
(according to diagram). Then insert the xture into the
lamp pole, and adjust to a proper angle based on the
project requirement.
3
Adjustable Angle Installation for OD 1-5/8” or OD 2-3/8” Round Pole
1-5/8” Round Pole
2-3/8” Round Pole
Line
Neutral
Ground
Black/Brown
Blue/White
Green/Yellow Green
1
1
2
2
3