SOLGAARD SOLARBANK User manual

USER MANUAL
Store the sun. Power your phone. Blast your tunes.
Francais/Español/Deutsch/Nederlands @ www.solgaard.co/manual

Solarbank Package Contains:
POWER BUTTON
(RESET BUTTON)
SOLAR PANELSPEAKERS
INDICATOR LEDS
2.4A HIGH SPEED USB PORT
1.0A STANDARD SPEED
USB PORT
MICRO USB PORT
AUX CABLE INPUT
2.0A Micro USB CableSolarbank by Solgaard AUX Cable

Fully charge by connecng Micro USB port to a
USB wall charger with the included cable.
1. POWERBANK FUNCTION
Full Charge: approx 6hrs Full Charge: approx 10hrs
High Speed Charger Normal Charger
a
a
c
c
b
b
d
Press the Power buon to check baery level.
d
From full - Solarbank holds 6 full charges for a brand new smartphone.
The upper large USB port will charge at 1a output, the
lower USB port will charge at high speed 2.4a output.
1A USB port 2.4A High Speed USB port
= Full baery. = Time to charge up!

2. SOLAR POWER FUNCTION
We suggest to charge fully via USB, then solar keeps your powerbank topped up.
2 hours of good light per day and a 50% smartphone top up = endless power.
To charge Solarbank from 0-100% takes around 30 hours of ideal sunlight.
The solar power generates power in sunlight best. However it can also
generate power in daylight with non-direct sunlight.
In ideal sunlight it will generate approximately 450mAh per hour.
LEDs indicate how much power you are harvesng from the sun.
25% in 1 hour
100% in 4 hours
To solar charge your smartphone:

3. SPEAKERS FUNCTION
In Bluetooth search mode the device will automacally connect to a recognized
device or it will stay in search mode unl you pair a new device.
We’ve made Solarbank as simple as possible for use. The single buon funcon
makes it very easy. Also, because of the massive baery, it means you’ll get over 100
hours of playback me via Bluetooth even if you don’t get any solar power. Any solar
power will give you even more music me!
Pairing by Bluetooth
AUX Mode
TURN ON/TURN OFF
BLUETOOTH SEARCH MODE
Connect AUX cable to disable Bluetooth mode and enter AUX mode.
Hold the power buon down for 2 seconds.
LED lights blinking.
Over 100 Hours of Playback

If none of the above is working, press and hold the on/off buon for 3 seconds to
reset the Solarbank. You will need to tell your phone to ‘forget this device’ in order to
re-establish a connecon between your device and your Solarbank.
If you are having trouble connecng, it’s possible your friend has already
connected. If this is the case, turn bluetooth off on the other device, turn
bluetooth on with the desired device. Power the Solarbank down by
holding power buon for 2 seconds. Then aer it is off, turn back on by
pressing the power buon down for 2 seconds again. If it does not
connect automacally, go to the Bluetooth sengs on the desired device,
and connect by manually pressing to connect to ‘Solarbank by Solgaard’.
TROUBLESHOOTING CONNECTION ISSUES
Factory reset

This device complies with Part 15 of the FCC rules and Industry Canada license-exempt
RSS standard(s). Operaon is subject to the following two condions: (1) this device may
not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operaon.
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modificaons or change to this equipment. Such modificaons or change
could void the user’s authority to operate the equipment.
This radio transmier (idenfy the device by cerficaon number or model number if
Category II) has been approved by Industry Canada to operate with the antenna types
listed below with the maximum permissible gain indicated. Antenna types not included in
this list, having a gain greater than the maximum gain indicated for that type, are strictly
prohibited for use with this device.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protecon against harmful interference in a residenal installaon.
CAUTION:

This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instrucons, may cause harmful interference to radio
communicaons. However, there is no guarantee that interference will not occur in a
parcular installaon. If this equipment does cause harmful interference to radio or
television recepon, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separaon between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement.
To maintain compliance with FCC’s RF exposure guidelines, this equipment should be installed
and operated with a minimum distance of 20cm between the radiator and your body.