Solt GGSHPD800W User manual

E S S E N T I A L S FOR LIFE
User
Manual
8kg Heat Pump
Clothes Dryer
MODEL
GGSHPD800W
V1.2 0823

2
User Manual
Welcome
Congratulations on purchasing your new Heat Pump Clothes Dryer.
Sôlt is proudly distributed within Australia by Residentia Group Pty Ltd.
Please refer to the warranty card at the rear of this manual for information
regarding your product’s parts and labour warranty, or visit us online at:
→ www.residentiagroup.com.au
At Residentia Group, we are customer obsessed and our Support Team are
there to ensure you get the most out of your appliance. Should you want to
learn more about your unit, and importantly, taking care of the appliance, our
Support Team are here to help.
You can use our online Support Centre at any time by visiting:
→ http://support.residentiagroup.com.au
Or you can contact us via phone by dialling: 1300 11 HELP (4357).
It is important that you read through the following use and care manual
thoroughly to familiarise yourself with the installation and operation
requirements of your appliance to ensure optimum performance.
Again, thank you for choosing an Sôlt appliance and we look forward to being
of service to you.
Kind Regards,
The Residentia Team
Residentia Group
—
Head Office
165 Barkly Avenue
Burnley Victoria
Australia 3121
—
ACN
600 546 656
—
Online
residentia.group
www.Sôlt.house
@Solt.house
—
Postage
PO BOX 5177, Burnley
VIC Australia 3121
—
Telephone
1300 11 4357
—
Email
[email protected]oup

3
User Manual
Sôlt recommends the use of original spare parts.
When contacting our customer service team by calling 1300 11 4357,
or by e-mailing [e-mail], please ensure that
you have the following information at hand.
(found on your appliances’ rating plate).
•Model Number
•Serial Number
Safety Information 0
Your Clothes Dryer 0
Installation Instructions 0
Control Panel 08
Operating Instructions 
Cleaning & Maintenance 3
Technical Specifications 4
Troubleshooting 5
Purchase Details 
Warranty Information 
Contents
Customer Care

4
User Manual
DRYER CARE SYMBOLS
Please pay attention to use the drying machine if the
materials of your clothes can not be dried by it or contain
the symbols as follows:
IMPORTANT!
CAUTION: RISK OF FIRE!
To prevent any damages to your and others’ life or
property, you have to follow the safety notes.
• This product belongs to the category of electrical
appliances, and only for drying textiles which have
been washed with water in the household.
Please pay attention to the safety of power use during
the operation!
• The power source with reliable earthing must be
used. Its earth wire must be buried under the ground
and shall not be connected with the public utilities
such as city water pipe or gas pipe etc. The earth wire
and null wire shall be distinguished and shall not be
connected together.
• The maximum mass of dry textile material is 8
kilograms to be used in the appliance.
• That the tumble dryer is not to be used if industrial
chemicals have been used for cleaning.
• Do not dry unwashed items in the tumble dryer.
• Adequate ventilation has to be provided to avoid
the back flow of gases into the room from appliance
burning other fuels, including open fires
• WARNING: never stop a tumble dryer before the end
of the drying cycle unless all items are quickly removed
and spread out so that the heat is dissipated.
• The exhaust air must not be discharged into a flue
which is used for exhausting fumes from appliance
burning gas or other fuels.
• The appliance must not be install behind a lockable
door, a sliding door or a door with a hinge on the
opposite side to that of the tumble dryer. In such a
way that a full opening of the tumble dryer door is
restricted.
• Keep pets away from this appliance.
• Oil-affected items can ignite spontaneously, especially
when exposed to heat sources such as in a tumble
dryer. The items become warm, causing an oxidation
reaction in the oil. Oxidation creates heat. If the heat
cannot escape, the items can become hot enough to
catch fire. Piling, stacking or storing oil-affected items
can prevent heat from escaping and so can create a
fire hazard.
• If it is unavoidable that fabrics that contain vegetable
or cooking oil or have been contaminated by hair care
products be placed in a tumble dryer they should first
be washed in hot water with extra detergent-this will
reduce, but not eliminate, the hazard.
• The appliance should not be overturned during normal
use or maintenance.
• If the power cable is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
• This appliance is for indoor use only.
Sfety Information

5
User Manual
• The openings must not be obstructed by a carpet;
• Children of less than 3 years should be kept away
unless continuously supervised. If the appliance
appear high temperature abnormally, please draw
the mail plug immediately.
• The appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety. Children should be
supervised to ensure that they do not play with
the appliance.
• To ensure your and your family’s safety, please
make improvement immediately if any power use
at your home does not meet the above-mentioned
requirement.
ELECTRIC SHOCK HAZARD
1. Do not draw the power cord forcefully to pull out
the mains plug.
2. Please do not plug/draw the mains plug with wet
hands.
3. Do not damage the power cord and the power plug.
INJURY DANGER
1. Do not disassemble and install the dryer under no
instruction or supervision.
2. Do not stack this dryer on washing machine without
stacking kits.(if want stacking on washing machine,
please purchase the Independent parts and it must
be installed by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.)
3. Do not lean on the opened door of the dryer.
4. Do not put any objects on the dryer, such as a candle
or electric cooker.
DAMAGE DANGER
1. Do not dry over the rated capacity.
2. Do not operate the dryer without the filter door and
filter base.
3. Do not dry the clothes before being spun.
4. Do not expose the dryer directly under the sun, and
indoor use only.
5. Do not install the dryer in the humid and
drenching environment.
6. At the cleaning and maintenance, please do
remember to pull out the power plug and do not
directly wash the dryer with water.
EXPLOSION & FIRE DANGER
• Please do not dry the clothes with some flammable
substances such as the coal oil, alcohol or there will be
the explosion.
• The appliance contains an environmentally friendly
but flammable R290 refrigerant. Keep away from open
flame And other sources of ignition.
• The tumble dryer is not to be used if industrial
chemicals have been used for cleaning.
• Do not dry unwashed items in the tumble dryer.
• Items that have been soiled with substances such as
cooking oil, acetone, alcohol, petrol, kerosene, spot
removers, turpentine, waxes and wax removers should
be washed in hot water with an extra amount of
detergent before being dried in the tumble dryer.
• Items such as foam rubber (latex foam), shower caps,
waterproof textiles, rubber backed articles and clothes
or pillows fitted with foam rubber pads should not be
dried in the tumble dryer.
• Fabric softeners, or similar products, should be used as
specified by the fabric softener instructions.
• Oil-affected items can ignite spontaneously, especially
when exposed to heat sources such as in a tumble
dryer.
• The items become warm, causing an oxidation
reaction in the oil. Oxidation creates heat. If the heat
cannot escape, the items can become hot enough to
catch fire. Piling, stacking or storing oil-affected items
can prevent heat from escaping and so create a fire
hazard.
• Remove all objects from pockets such as lighters
and matches.
• If it is unavoidable that fabrics that contain vegetable
or cooking oil or have been contaminated by hair care
products be placed in a tumble dryer they should first
be washed in hot water with extra detergent. This will
reduce, but not eliminate, the hazard.
• WARNING: Never stop a tumble dryer before the end
of the drying cycle unless all items are quickly removed
and spread out so that the heat is dissipated.
• Openings must not be obstructed.
• The lint trap has to be cleaned frequently.
• Lint must not to be allowed to accumulate around
the dryer.
DISPOSAL OF PACKAGING
• The packaging is designed to protect the appliance
from damage during transportation. The packaging
materials are environmentally friendly and should be
recycled. Recycling the packaging can reduce the use
of raw materials in the manufacturing process and the
amount of waste in landfill sites.

6
User Manual
NOTE!
The images in this user manual are for reference only. Your appliance may appear differently.
ACCESSORIES
The following parts are necessary
if you wish to use the drain hose to
drain the water externally. Please
follow the instructions below to do this.
Your Clothes Dryer
INSTALLATION
9
Accessories
Product Description
Note: The actual model you purchased might differ. Please see the product you purchased in kind prevail.
Installation
Connector
Hose holder
Drain hose joint
Pull up the drain
hose joint
Pull up the upper drain hose Connect the external
drain hose to the water
pump
Put the external drain hose
into the floor drain
(be careful not to bend the
external drain hose)
Power cord
Door filter
Water container
Door
Control panel
Air inlet
Maintenance cover
Drum
Top board
The following parts are necessary for this model to avoid the question of the housing drawer
is easy to fill full.
Please wear gloves to install them as per the instruction below.
Power Cord
Top Panel
Water Container
Drying Drum
Door Filter
Maintenance Cover
Air Inlet
Door
Control Panel
INSTALLATION
9
Accessories
Product Description
Note: The actual model you purchased might differ. Please see the product you purchased in kind prevail.
Installation
Connector
Hose holder
Drain hose joint
Pull up the drain
hose joint
Pull up the upper drain hose Connect the external
drain hose to the water
pump
Put the external drain hose
into the floor drain
(be careful not to bend the
external drain hose)
Power cord
Door filter
Water container
Door
Control panel
Air inlet
Maintenance cover
Drum
Top board
The following parts are necessary for this model to avoid the question of the housing drawer
is easy to fill full.
Please wear gloves to install them as per the instruction below.
Hose Holder
Condensing Drain Hose
Connector
1. Pull out the upper
drain hose
2. Put the external drain hose into the
floor drain (be careful not to bend
the external drain hose)
3. Put the hose holder in the washing
basin or any other sink.
xx
Drain Hose
Drain Hose
X
Overflow Hose

7
User Manual
Instlltion Instructions
IMPORTANT!
If the power cord is damaged, it must be replaced by Residentia Group or one of it’s authorised service representatives.
Please contact 1300 11 HELP (4357) and ensure the appliance is completely disconnected from the power supply.
TRANSPORT
Move cautiously. Never grasp any salient parts of machine. The door cannot be used as the handle for transport.
If the dryer can't be transported upright the dryer can be tilted at an angle less than 30°.
Risk of injury and damage! Improper handling of the appliance may result in injury.
• The appliance is heavy. Never transport or carry the appliance alone; always with the assistance of another person.
• Remove all obstacles on the transport route and from the installation location, e.g. open doors and clear away
objects lying on the floor.
• Do not use the open door as a handhold.
• Remove all package material before using the appliance.
• Before setting up the tumble dryer, check it for any externally visible damage.
Do not install or use a damaged tumble dryer.
• Do not install the tumble dryer in a room where there is a risk of frost occurring. At temperatures around freezing
point the tumble dryer may not be able to operate properly. There is a risk of damage if the condensed water is
allowed to freeze in the pump and hoses.
INSTALLATION POSITIONING
• Children can become entangled in the packaging film or swallow small parts and suffocate. Do not allow children to
play with the packaging.
• The appliance must not be installed behind a lockable door, a sliding door or a door with a hinge on the opposite
side to that of the tumble dryer, in such a way that a full opening of the tumble dryer door is restricted.
• Do not restrict the floor clearance through deep pile carpets, strips of wood or similar. This might cause heat built-up
which would interfere with the operation of the appliance.
1. It is recommended that, for your convenience, the machine is positioned close to your washing machine.
2. Do not stack this dryer on washing machine without stacking kits. (If you want to stack this dryer on a washing
machine, please purchase the independent parts. Installation shall be done by the manufacturer, its service agent or
similarly qualified persons to avoid any hazards.)
3. The tumble dryer must be installed in a clean place, where dirt does not accumulate. Air must be able to circulate
freely around the appliance. Do not obstruct the front air inlet or the air intake grilles at the back of the machine.
4. To keep vibration and noise to a minimum level when the dryer is in use, it must be placed on a firm and level surface.
5. The feet must never be removed.
LEVEL ADJUSTING
Once in its permanent operating position, check that
the dryer is absolutely level with the aid of a spirit level.
If it is not, adjust the feet by hand or using a tool.
POWER SUPPLY CONNECTION
1. Make sure that the voltage of the power supply is the same as the electric specification.
2. Do not connect the dryer with the power connection board, a universal plug or socket, do not use multi-plug
adapters and extension cables.
11
INSTALLATION
Level Adjusting
Once in its permanent operating position, check that
the dryer is absolutely level with the aid of a spirit level.
If it is not, adjust the feet by hand or using a tool.
Power Supply Connection
4. To keep vibration and noise within minimum level when the dryer is in use, it must
be placed on a firm and level surface.
5. The feet must never be removed.
1.Make sure that the voltage of the power supply is the same as the electric specification.
2.Do not connect the dryer with the power connection board, a universal plug or socket,
do not use multi-plug adapters and extension cables.
11
INSTALLATION
Level Adjusting
Once in its permanent operating position, check that
the dryer is absolutely level with the aid of a spirit level.
If it is not, adjust the feet by hand or using a tool.
Power Supply Connection
4. To keep vibration and noise within minimum level when the dryer is in use, it must
be placed on a firm and level surface.
5. The feet must never be removed.
1.Make sure that the voltage of the power supply is the same as the electric specification.
2.Do not connect the dryer with the power connection board, a universal plug or socket,
do not use multi-plug adapters and extension cables.

8
User Manual
YOUR CONTROL PANEL
1. On/Off
2. Start/Pause
3. Additional Function Buttons
4. LED Display Screen
5. Program control dial
DISPLAY SCREEN SYMBOLS
18
OPERATION
Child lock
Remaining Time indicator/Error message
Clean filters (warning)
Intensity
My Cycle
Display
Delay
Anti-crease
Control Pnel
1
2
4
5
Delay
Child Lock
Time Remaining Indicator / Error Message
Clean Filter Warning
Anti-crease
Intensity
Your Cycle
3

9
User Manual
Operting Instructions
BEFORE FIRST USE
Leave it to stand for 2 hours after transporting.
Before first use, please use some soft fabric to clean the inside drum.
1. Put some clean rags into the drum
2. Plug the power, press On/Off
3. Select the Refresh Program, press Start/Pause button
4. After finishing this program, please refer to the “Maintenance and Cleaning” section to clean the door filter.
Note: During drying, the compressor and the water will generate some noise which is completely normal.
BEFORE DRYING
1. Before drying, thoroughly spin the laundry in washing machine. High spin speed shortens the drying time and
saves energy.
2. For uniform drying result, sort the laundry according to fabric type and select the appropriate drying program.
3. Before drying, please close zips, hooks and eyelets, button, tie fabric belts, etc.
4. Remove all objects from pockets such as lighters and matches.
5. Sew in or remove under wiring from bras.
6. Close duvet covers and pillow cases to prevent small items from being rolled up inside them.
7. Leave jackets open and undo any long zips so that textiles dry evenly.
8. Do not over dry the clothes, because over dried clothes can easily get creases.
9. Do not dry the articles containing rubber or similar elastic materials.
10. Keep the area around the tumble dryer clean. Coal dust or flour may cause an explosion.
11. The door shall be opened only after the program of the tumble dryer is finished to avoid being scalded by hot
steam or over heated drying machine.
12. Clean the lint filter and empty water container after each use to avoid extension of drying time and increase
of energy consumption.
13. Do not dry clothes after dry-clean process.
APPROXIMATE WEIGHTS OF DRY CLOTHES
Note: Do not put more clothing in the dryer than the rated capacity.
Do not dry dripping wet laundry, it may damage the laundry.
14
OPERATION
Do not put more load than rated.
• Do not dry dripping wet laundry. The dryer might get damaged
•
Note!
The reference weight of dry clothes (weight per item)
Sweater
(mixed 800g)
Jacket
( 800g ) cotton
Jeans
(800g)
Bath Towel
( 900g )cotton
Single bedsheet
( 600g )cotton
T-Shirt
( 180g )cotton
Work clothes
( 1120g)
Underwear
( 70g )cotton
Pyjamas
( 200g)
Socks
( 50g )mixed-weave
Shirt
( 300g )cotton
Only dry laundry suitable for tumble drying. Regard the laundry care labels:
Suitable for tumble drying
Normal drying process: Drying in the tumbler is possible under normal load and
temperature 80°.
Mild drying process: Caution is appropriate when tumble drying. Select mild
process with reduced thermal action.
Do not tumble dry: Articles unsuitable for drying in the tumbler.

10
User Manual
QUICK START
CAUTION!
• Prior to using the dryer, ensure that it is correctly installed.
AFTER WASHING
The appliance will sound an alert and the display with show "00:00" after the drying cycle is complete.
NOTE!
The images in this user manual are for reference only. Your appliance may appear differently.
DRYING START
The drum will rotate after the program starts. The cycle phase LED in the display will light up and the remaining
program time will be displayed.
DRYING END
1. The drum will stop rotating after the program ends. The display will show "0:00", also the cycle phase
LED showing "End" and related LED will illuminate. The dryer will start Anti-Crease function if user doesn't
remove the load.
2. Please press On/Off button after unloading the tumble dryer to cut off power and pull out the plug.
OPERATION
12
After Drying
Drying
Buzzer beep and " :00"on display.0
1 2 3 4 5
open the door and
take out laundry
pull out the
container
pour out
condensate water
clean the filter power off
Quick Start
Before using, make sure the tumble dryer is installed correctly.
Note!
1
plug in
2
load
3
close the door
start
on select program select function
or default
• If the socket with a switch is used, please press the switch to turn off the power
directly.
Note!
Before Drying
Plug in Load laundry Close the door
OPERATION
12
After Drying
Drying
Buzzer beep and " :00"on display.0
1 2 3 4 5
open the door and
take out laundry
pull out the
container
pour out
condensate water
clean the filter power off
Quick Start
Before using, make sure the tumble dryer is installed correctly.
Note!
1
plug in
2
load
3
close the door
start
on select program select function
or default
• If the socket with a switch is used, please press the switch to turn off the power
directly.
Note!
Before Drying
OPERATION
12
After Drying
Drying
Buzzer beep and " :00"on display.0
1 2 3 4 5
open the door and
take out laundry
pull out the
container
pour out
condensate water
clean the filter power off
Quick Start
Before using, make sure the tumble dryer is installed correctly.
Note!
1
plug in
2
load
3
close the door
start
on select program select function
or default
• If the socket with a switch is used, please press the switch to turn off the power
directly.
Note!
Before Drying
OPERATION
12
After Drying
Drying
Buzzer beep and " :00"on display.0
1 2 3 4 5
open the door and
take out laundry
pull out the
container
pour out
condensate water
clean the filter power off
Quick Start
Before using, make sure the tumble dryer is installed correctly.
Note!
1
plug in
2
load
3
close the door
start
on select program select function
or default
• If the socket with a switch is used, please press the switch to turn off the power
directly.
Note!
Before Drying
Press On Select desired
program Select any
desired additional
programs
Press Start
OPERATION
12
After Drying
Drying
Buzzer beep and " :00"on display.0
1 2 3 4 5
open the door and
take out laundry
pull out the
container
pour out
condensate water
clean the filter power off
Quick Start
Before using, make sure the tumble dryer is installed correctly.
Note!
1
plug in
2
load
3
close the door
start
on select program select function
or default
• If the socket with a switch is used, please press the switch to turn off the power
directly.
Note!
Before Drying
OPERATION
12
After Drying
Drying
Buzzer beep and " :00"on display.0
1 2 3 4 5
open the door and
take out laundry
pull out the
container
pour out
condensate water
clean the filter power off
Quick Start
Before using, make sure the tumble dryer is installed correctly.
Note!
1
plug in
2
load
3
close the door
start
on select program select function
or default
• If the socket with a switch is used, please press the switch to turn off the power
directly.
Note!
Before Drying
OPERATION
12
After Drying
Drying
Buzzer beep and " :00"on display.0
1 2 3 4 5
open the door and
take out laundry
pull out the
container
pour out
condensate water
clean the filter power off
Quick Start
Before using, make sure the tumble dryer is installed correctly.
Note!
1
plug in
2
load
3
close the door
start
on select program select function
or default
• If the socket with a switch is used, please press the switch to turn off the power
directly.
Note!
Before Drying
Open the door
and take out
the laundry
Pull out the
container Pour out the
condensate
water
Clean the lter Power o
OPERATION
12
After Drying
Drying
Buzzer beep and " :00"on display.0
1 2 3 4 5
open the door and
take out laundry
pull out the
container
pour out
condensate water
clean the filter power off
Quick Start
Before using, make sure the tumble dryer is installed correctly.
Note!
1
plug in
2
load
3
close the door
start
on select program select function
or default
• If the socket with a switch is used, please press the switch to turn off the power
directly.
Note!
Before Drying
OPERATION
12
After Drying
Drying
Buzzer beep and " :00"on display.0
1 2 3 4 5
open the door and
take out laundry
pull out the
container
pour out
condensate water
clean the filter power off
Quick Start
Before using, make sure the tumble dryer is installed correctly.
Note!
1
plug in
2
load
3
close the door
start
on select program select function
or default
• If the socket with a switch is used, please press the switch to turn off the power
directly.
Note!
Before Drying
OPERATION
12
After Drying
Drying
Buzzer beep and " :00"on display.0
1 2 3 4 5
open the door and
take out laundry
pull out the
container
pour out
condensate water
clean the filter power off
Quick Start
Before using, make sure the tumble dryer is installed correctly.
Note!
1
plug in
2
load
3
close the door
start
on select program select function
or default
• If the socket with a switch is used, please press the switch to turn off the power
directly.
Note!
Before Drying
OPERATION
12
After Drying
Drying
Buzzer beep and " :00"on display.0
1 2 3 4 5
open the door and
take out laundry
pull out the
container
pour out
condensate water
clean the filter power off
Quick Start
Before using, make sure the tumble dryer is installed correctly.
Note!
1
plug in
2
load
3
close the door
start
on select program select function
or default
• If the socket with a switch is used, please press the switch to turn off the power
directly.
Note!
Before Drying
OPERATION
12
After Drying
Drying
Buzzer beep and " :00"on display.0
1 2 3 4 5
open the door and
take out laundry
pull out the
container
pour out
condensate water
clean the filter power off
Quick Start
Before using, make sure the tumble dryer is installed correctly.
Note!
1
plug in
2
load
3
close the door
start
on select program select function
or default
• If the socket with a switch is used, please press the switch to turn off the power
directly.
Note!
Before Drying
Operting Instructions (Continued)

11
User Manual
USING THE ADDITIONAL FUNCTIONS
DELAY FUNCTION
This function is used for delaying the start of the drying program up to 24 hours. When the delayed program starts,
the time starts to countdown on the display and the delay icon blinks.
1. Load your laundry and make sure the machine door is closed.
2. Press the On/Off button,then use the program selector knob to select the desired program.
3. You can additionally select the Anti-Crease or Signal functions according to your need.
4. Press the Delay button.
5. Repeatedly to press the Delay button to select the desired delay time.
6. Then press the Start/Pause button and the dryer will be in standby and the delay time will start counting down.
The drying procedure will be automatically performed when the delay time is over.
7. If you press the Start/Pause button again, the delay function will be paused.
8. If you want to cancel the “Delay” function, please press the On/Off button.
TIME
When the Time program is selected, the Time button can be used to adjust the drying time in 10 minute increments.
ANTICREASE FUNCTION
At the end of the drying cycle, the anti-crease operation time is automatically set to 30 minutes or 120 minutes if you
select it. Press the Anti-crease button to select the time. If you do not want to use this function simply remove your
laundry at the end of the cycle.
This function prevents the laundry from creases. The laundry can be removed during the anti-crease phase.
Except Cool, Wool and Refresh, all the other programs have this function.
INTENSITY
You can adjust the dryness level of the laundry by pressing the Intensity button.
1. The intensity function can be activated only before the program starts.
2. Except the Cotton Iron, Delicate, Wool and Time program, all the other programs can be adjusted with the Intensity
function.
YOUR CYCLE
Used to define and save your favourite program, so you can use it frequently with the press of a button.
1. Select the desired program and other drying functions.
2. Press and hold the Time for 3 seconds until the beep sounds and the desired program settings have been saved.
3. Next time you dry, turn the program selector to the Your Cycle position, then you can start your favourite program.
If you want to change the Your Cycle settings, repeat the steps (1) and (2).
CHILD LOCK
This machine incorporates a special child safety lock, which can prevent children from carelessly pressing buttons and
doing damage to themselves or the appliance.
1. When the drying cycle is running, press the Anti-Crease button at the same time for 3 seconds to start
the child lock function.
2. When child lock function is set, the display will show Child lock icon and all button are deactivated,
except the On/Off button.
3. To deactivate the child lock function, the Anti-Crease button shall be pressed at the same time for 3 seconds.

12
User Manual
DRYING PROGRAMS TABLE
PROGRAM MAX LOAD RECOMMENDED USE PROPERTIES DELAY TIME
Cotton
Extra
8.0kg
For single or multi layered cotton laundry to be dried
completely for immediate storage. Y NStandard
Iron For single layered cotton to remain damp for ironing.
Delicate - 1.0kg For delicate laundry that is suitable for drying or
laundry advised to be hand washed at a low temp. Y N
Mix - 3.5kg For mixed fabrics from cotton and synthetics. Y N
Synthetics
Extra
3.5kg
For thick or multi-layer synthetic fabrics to be
dried completely
Y N
Standard To dry thin synthetic textiles, which are not ironed,
such as easy care shirts, baby cloths or socks.
Wool - 1.0kg To refresh you wool items and make them more
fresh and fluffy. Y N
Special
Denim 4.0kg To dry jeans or denim clothes that are spun at high
speed in the washing machine.
Y N
Bed Linen 4.0kg To dry bed linen, bed sheets or other large items.
Sports 3.0kg To dry sportswear and thin fabrics from polyester,
which are not ironed.
Shirts 1.0kg
For easy care laundry such as shirts and blouses
equipped with anti-crease functionality to minimise
the ironing effort. Place clothes loosely in the dryer.
Once dried, remove quickly
and hang it on a clothes hanger.
Your
Cycle - - Define and save your favourite program settings. Y -
Time
Warm -
To dry individual items or to finish the drying process
of multi-layer fabrics with different drying behaviour,
such as jackets, pillows or voluminous items.
Min. 10 minutes — Max. 120 minutes.
Y Y
Cool -To air items without heating.
Min. 10 minutes — Max. 120 minutes.
Refresh 1.0kg
To refresh clothes that have beenkept in a closed
environment for a long time or to remove odors.
Min. 10 minutes — Max. 120 minutes.
Operting Instructions (Continued)
NOTE FOR TEST INSTITUTES:
Test programme in accordance with Regulation 392/2012/EU for energy labelling, measured in
accordance with EN 61121 and suitable for drying normal cotton load at rated load capacity.

13
User Manual
Clening & Mintennce
CLEANING AND CARE
EMPTYING THE WATER CONTAINER
WARNING!
Empty the water container after each use. Once the water container is filled completely, the program
will be paused and the " " icon will light. After the container is emptied, the dryer can be restarted by
pressing Start/Pause button.
• Do not drink the condensate water.
• Do not use the dryer without the water container.
CLEANING THE DOOR FILTER
Make sure you clean the door filter after each cycle.
1. Open the door.
2. Take out the door filter.
3. Open the filter and remove the fluff on the filter.
You can use running water to help clean it.
4. Dry the filter door thoroughly before reinstalling it.
Note: Take notice of the correct orientation
of the filter before inserting it back.
WARNING!
• The fluff accumulated on the filter will block the air
circulation. Not cleaning the filter regularly will increase
drying time and energy consumption.
• Disconnect the power cord before cleaning!
• Do not operate the dryer without the filter!
CLEANING THE HEAT EXCHANGER
WARNING! Do not touch the heat exchanger with your hand as it may cause injury.
As necessary, approx. once every 3 months, remove the fluff from the heat exchanger using a vacuum
cleaner with a dusting brush attached. Clean the heat exchanger without applying any pressure.
Otherwise the heat exchanger could be damaged. The dryer will not dry if the cooling fins are damaged
or bent.
MAINTENANCE
21
Empty the water container
Clean the filter door
1. Pull out and hold the water container
with two hands.
2. Tilt the water container, pour out the
condensate water into the basin.
3. Install the water container.
Clean the filters
Cleaning and Care
This dryer has a primary door lint filter and a base filter in front of the heat exchanger
for additional protection. Make sure you clean the door filter after each cycle.
The base filter need to be cleaned after each fifth drying programme.
1. Open the door.
2. Take out the filter.
3. Open the filter and remove the fluff on
the filter, You can clean it in water.
4. Dry the filter thoroughly before
installing it back.
door
running
door
• Take notice of the correct orientation
before to insert the door filter.
Note!
Door Filter
• Empty the water container after each use. Once the water container is filled
completely, the programme will be paused and the " " icon will light. After
the container is emptied, the dryer can be restarted by pressing
【Start/Pause】button.
• Do not drink the condensate water.
• Do not use the dryer without the water container.
Warning!
！！
MAINTENANCE
21
Empty the water container
Clean the filter door
1. Pull out and hold the water container
with two hands.
2. Tilt the water container, pour out the
condensate water into the basin.
3. Install the water container.
Clean the filters
Cleaning and Care
This dryer has a primary door lint filter and a base filter in front of the heat exchanger
for additional protection. Make sure you clean the door filter after each cycle.
The base filter need to be cleaned after each fifth drying programme.
1. Open the door.
2. Take out the filter.
3. Open the filter and remove the fluff on
the filter, You can clean it in water.
4. Dry the filter thoroughly before
installing it back.
door
running
door
• Take notice of the correct orientation
before to insert the door filter.
Note!
Door Filter
• Empty the water container after each use. Once the water container is filled
completely, the programme will be paused and the " " icon will light. After
the container is emptied, the dryer can be restarted by pressing
【Start/Pause】button.
• Do not drink the condensate water.
• Do not use the dryer without the water container.
Warning!
！！
Pull out the water
container and keep
level with two hands.
Tilt the water container
to pour out condensate
into the basin.
MAINTENANCE
21
Empty the water container
Clean the filter door
1. Pull out and hold the water container
with two hands.
2. Tilt the water container, pour out the
condensate water into the basin.
3. Install the water container.
Clean the filters
Cleaning and Care
This dryer has a primary door lint filter and a base filter in front of the heat exchanger
for additional protection. Make sure you clean the door filter after each cycle.
The base filter need to be cleaned after each fifth drying programme.
1. Open the door.
2. Take out the filter.
3. Open the filter and remove the fluff on
the filter, You can clean it in water.
4. Dry the filter thoroughly before
installing it back.
door
running
door
• Take notice of the correct orientation
before to insert the door filter.
Note!
Door Filter
• Empty the water container after each use. Once the water container is filled
completely, the programme will be paused and the " " icon will light. After
the container is emptied, the dryer can be restarted by pressing
【Start/Pause】button.
• Do not drink the condensate water.
• Do not use the dryer without the water container.
Warning!
！！
Reinstall the water
container once empty.
MAINTENANCE
21
Empty the water container
Clean the filter door
1. Pull out and hold the water container
with two hands.
2. Tilt the water container, pour out the
condensate water into the basin.
3. Install the water container.
Clean the filters
Cleaning and Care
This dryer has a primary door lint filter and a base filter in front of the heat exchanger
for additional protection. Make sure you clean the door filter after each cycle.
The base filter need to be cleaned after each fifth drying programme.
1. Open the door.
2. Take out the filter.
3. Open the filter and remove the fluff on
the filter, You can clean it in water.
4. Dry the filter thoroughly before
installing it back.
door
running
door
• Take notice of the correct orientation
before to insert the door filter.
Note!
Door Filter
• Empty the water container after each use. Once the water container is filled
completely, the programme will be paused and the " " icon will light. After
the container is emptied, the dryer can be restarted by pressing
【Start/Pause】button.
• Do not drink the condensate water.
• Do not use the dryer without the water container.
Warning!
！！
MAINTENANCE
21
Empty the water container
Clean the filter door
1. Pull out and hold the water container
with two hands.
2. Tilt the water container, pour out the
condensate water into the basin.
3. Install the water container.
Clean the filters
Cleaning and Care
This dryer has a primary door lint filter and a base filter in front of the heat exchanger
for additional protection. Make sure you clean the door filter after each cycle.
The base filter need to be cleaned after each fifth drying programme.
1. Open the door.
2. Take out the filter.
3. Open the filter and remove the fluff on
the filter, You can clean it in water.
4. Dry the filter thoroughly before
installing it back.
door
running
door
• Take notice of the correct orientation
before to insert the door filter.
Note!
Door Filter
• Empty the water container after each use. Once the water container is filled
completely, the programme will be paused and the " " icon will light. After
the container is emptied, the dryer can be restarted by pressing
【Start/Pause】button.
• Do not drink the condensate water.
• Do not use the dryer without the water container.
Warning!
！！
Removing the
door lter.
MAINTENANCE
22
regularly will increase drying time and energy consumption.
• Disconnect the power cord before cleaning!
• Do not operate the dryer without the filter!
• The fluff accumulated on the filter will block the air circulation. Not cleaning the filter
Note!
As necessary, approx. once every 6 months, remove the fluff from the heat
exchanger using a vacuum cleaner with a dusting brush attached.
Clean the heat exchanger without applying any pressure. Otherwise the heat
exchanger could be damaged. The dryer will not dry
if the cooling fins are damaged or bent.
•
•
Clean the heat exchanger
Warning!
！！
Do not touch the heat exchanger with your hand,
which may cause an injury.

14
User Manual
MAINTENANCE
WARNING!
• Disconnect the power cord before cleaning.
• Clean the dryer with a clean damp cloth only.
• Do not use solvents, abrasive cleaners, glass cleaners or all-purpose cleaners.
These could damage plastic surfaces and other parts.
• Please wear gloves when cleaning.
CLEANING YOUR DRYER
• Prepare a clean damp cloth using clean water.
• Clean the door, especially the inside window.
• Clean the sealing around the door opening.
• Clean the humidity sensor inside the drum.
• Take out the filter, clean the sealing and air flow openings.
• Before starting the dryer, dry all parts with a soft cloth.
Cleaning & Maintenance (Continued)
Below outlines the technical specifications for your Sôlt Heat Pump Dryer.
Model GGSHPD800W
Size 595W × 600D × 845H (mm)
Ambient Temperature +5°C ~ +35°C
Rated Input Power 800W
Rated Voltage 220–240V~
Rated Frequency 50Hz
Refrigerant/Amount R290/120g
Net Weight 41kg
Rated Capacity 8.0kg
GWP 3
CO 2- eq 0.00t
Note: The rated capacity is the maximum capacity to be dried at one time. Make sure that the dry clothes which are
loaded into the appliance do not exceed the rated capacity.
Technical Specifications

15
User Manual
OPERATION IN CASE OF EMERGENCY
In the event of an emergency you should:
• Switch off all controls.
• Switch the washing machine off at the power point or at the fuse box.
• Call the Residentia Support Team on 1300 11 HELP (4357).
Some minor faults can be fixed by referring to the instructions given in the Troubleshooting section
below. There is also a self-help section online at https://support.residentiagroup.com.au/
DESCRIPTION SOLUTION
Display is not on
• Check if the power supply works.
• Check if the mains plug is inserted.
• Check the selected program.
• Press the On/Off button.
"FUL" Displays
• Check the water container. If it's full, please pour out the condensate
water and restart the dryer.
• If the container is not full, please restart the dryer.
• If the “FUL“ icon is still lit after you have finished the first two steps, please
contact the after sales service team.
" " Displays • Clean the lint filter.
Dyer does not start
• Connect the dryer to the mains.
• Turn on the tumble dryer.
• Check the door is closed.
• Check the program is set.
• Press the Start/Pause button.
Clothes not properly dry or drying
time is taking too long
• Clean lint filter.
• Empty the water container.
• Check the drain hose.
• Check installation place is appropriate.
• Keep the air inlet clean.
• Use higher drying intensity level program or time program.
There are humming noises • The compressor is operating. These noises are quite normal and do not
indicate a fault.
The dryer switches off at the end of
the program
• This is normal operation. The dryer will switch off automatically for
energy saving
Troubleshooting
18
OPERATION
Child lock
Remaining Time indicator/Error message
Clean filters (warning)
Intensity
My Cycle
Display
Delay
Anti-crease

16
User Manual
ERROR MESSAGES AND SOLUTIONS
WARNING! Never dismantle the dryer.
INDICATION REASON SOLUTION
"E32" displays Humidity sensor error.
Please contact the Residentia Group support
term on 1300 11 HELP (4357).
"E33" displays Temperature sensor error.
"FUL" displays
Water pump failure or water
level sensor failure.
Water Container is full. Empty the water container.
WARNING!
• Only authorised technicians can carry out repairs.
• If the LED displays other prompt and the dryer does not work, please call the Residentia Group support team.
Troubleshooting (continued)

17
User Manual
For future reference, please record the following information which can be found
on the rating plate and the date of purchase which can be found on your sales invoice.
STORE DETAILS
STORE NAME
|
ADDRESS
|
TELEPHONE
|
PURCHASE DATE
|
PRODUCT DETAILS
MODEL NO.
|
SERIAL NO.*
|
Purchase Details
Attach Your Receipt Here

18
User Manual
WARRANTY TERMS AND CONDITIONS
LAUNDRY APPLIANCES
This document sets out the terms and conditions of the
product warranties for Residentia Group Appliances. It is
an important document. Please keep it with your proof of
purchase documents in a safe place for future reference
should you require service for your Appliance.
1. IN THIS WARRANTY
(a) ‘acceptable quality’ as referred to in clause 10 of
this warranty has the same meaning referred to in
the ACL;
(b) ‘ACL’ means Trade Practices Amendment (Australian
Consumer Law) Act (No.2) 2010;
(c) ‘Appliance’ means any Residentia Group product
purchased by you accompanied by this document;
(d) ‘ASR’ means Residentia Group authorised service
representative;
(e) ‘Residentia Group’ means Residentia Group Pty Ltd
of 165 Barkly Ave, Burnley VIC 3121, ACN 600 546 656 in
respect of Appliances purchased in Australia;
(f ) ‘major failure’ as referred to in clause 10 of this warranty
has the same meaning referred to in the ACL and
includes a situation when an Appliance cannot be
repaired or it is uneconomic for Residentia Group, at its
discretion, to repair an Appliance during the Warranty
Period;
(g) ‘Warranty Period’ means:
(i) where the Appliance is used for personal, domestic
or household use (i.e. normal single family use) as
set out in the instruction manual, the Appliance is
warranted against manufacturing defects for 24
months, following the date of original purchase of
the Appliance;
(h) ‘you’ means the purchaser of the Appliance not having
purchased the Appliance for re-sale, and ‘your’ has a
corresponding meaning.
2. This warranty only applies to Appliances purchased and
used in Australia and is in addition to (and does
not exclude, restrict, or modify in any way) any
non-excludable statutory warranties in Australia.
3. During the Warranty Period Residentia Group or its
ASR will, at no extra charge if your Appliance is readily
accessible for service, without special equipment and
subject to these terms and conditions, repair or replace
any parts which it considers to be defective. Residentia
Group or its ASR may use remanufactured parts to repair
your Appliance. You agree that any replaced Appliances
or parts become the property of Residentia Group. This
warranty does not apply to light globes, batteries, seals,
lters or similar perishable parts.
4. Parts and Appliances not supplied by Residentia Group
are not covered by this warranty.
Warranty Information

19
User Manual
5. You will bear the cost of transportation, travel and
delivery of the Appliance to and from Residentia Group
or its ASR. If you reside outside of the service area, you
will bear the cost of:
(a) travel of an authorised representative;
(b) transportation and delivery of the Appliance to and from
Residentia Group or its ASR, in all instances, unless the
Appliance is transported by Residentia Group or its ASR,
the Appliance is transported at the owner’s cost and risk
while in transit to and from Residentia Group or its ASR.
6. Proof of purchase is required before you can make
a claim under this warranty.
7. You may not make a claim under this warranty unless
the defect claimed is due to faulty or defective parts
or workmanship. Residentia Group is not liable in the
following situations (which are not exhaustive):
(a) the Appliance is damaged by:
(i) accident
(ii) misuse or abuse, including failure to properly
maintain or service
(iii) normal wear and tear
(iv) power surges, electrical storm damage or incorrect
power supply
(v) incomplete or improper installation
(vi) incorrect, improper or inappropriate operation
(vii) insect or vermin infestation
(viii) failure to comply with any additional instructions
supplied with the Appliance;
(b) the Appliance is modied without authority from
Residentia Group in writing;
(c) the Appliance’s serial number or warranty seal has been
removed or defaced;
(d) the Appliance was serviced or repaired by anyone other
than Residentia Group, an authorised repairer
or ASR.
8. This warranty, the contract to which it relates and the
relationship between you and Residentia Group are
governed by the law applicable where the Appliance was
purchased.
9. To the extent permitted by law, Residentia Group
excludes all warranties and liabilities (other than as
contained in this document) including liability for any
loss or damage whether direct or indirect arising from
your purchase, use or non use of the Appliance.
10. For Appliances and services provided by Residentia
Group in Australia, the Appliances come with a
guarantee by Residentia Group that cannot be excluded
under the Australian Consumer Law. You are entitled
to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss
or damage. You are also entitled to have the Appliance
repaired or replaced if the Appliance fails to be of
acceptable quality and the failure does not amount to a
major failure. The benets to you given by this warranty
are in addition to your other rights and remedies under a
law in relation to the Appliances or services to which the
warranty relates.
11. At all times during the Warranty Period, Residentia
Group shall, at its discretion, determine whether repair,
replacement or refund will apply if an Appliance has a
valid warranty claim applicable to it.
12. Missing parts are not covered by warranty.
Residentia Group reserves the right to assess each
request for missing parts in a case by case basis.
Any parts that are not reported missing in the rst week
after purchase will not provide free of charge.
13. To enquire about claiming under this warranty, please
follow these steps:
(a) carefully check the operating instructions, user manual
and the terms of this warranty;
(b) have the model and serial number of the Appliance
available;
(c) have the proof of purchase (e.g. an invoice) available;
(d) telephone the numbers shown below.
14. You accept that if you make a warranty claim, Residentia
Group and its ASR may exchange information in relation
to you to enable Residentia Group to meet its obligations
under this warranty.
IMPORTANT
Before calling for service, please ensure that the steps
in point 13 have been followed.
CONTACT SERVICE
→ Please call 1300 11 HELP (4357)
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are
entitled to a replacement or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced
if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
The Australian Consumer Law requires the
inclusion of the following statement with
this warranty:

T. 1300 11 4357
E. [e-mail]
E S S E N T I A L S FOR LIFE
www.solt.house
An initiative by
Residentia Group