Soltek Sl-85drv2 User manual

The Soul Of Computer Technology

Mainboard

SL-85DRV2

User Manual V1.0

85DRV2

NOTICE Product Model : SL-85DRV2

Manual Revision : V1.0

Release Date : Dece ber 2001

his Users Guide & Technical Reference is to help system manu-

facturers and end-users set up and install the mainboard.

Every effort has been made to ensure that the information in this

manual is accurate. Soltek Computer nc. is not responsible for print-

ing or clerical errors. nformation in this document is subject to

change without notice and does not represent a commitment on

Soltek Computer nc.

No part of this manual may be reproduced, transmitted, translated

into any language in any form or by any means, electronic or

mechanical, including photocopying and recording, for any purpose

without the express written permission of Soltek Computer nc.

Companies and products mentioned in this manual are for identifi-

cation purpose only. Product names appearing in this manual may

or may not be registered trademarks or copyrights of their respec-

tive companies.

Soltek Computer nc. provides this manual “as is “ without warranty

of any kind, either express or implied, including but not limited to the

implied warranties or conditions of merchantability or fitness for a

particular purpose. n no event shall Soltek Computer nc. be liable

for any loss or profits, loss of business, loss of use or data, interruption of

business, or for indirect, special, incidental, or consequential damages of

any kind, even if Soltek Computer nc. has been advised of the possibility

of such damages arising from any defect or error in this manual or product.

• ntel Pentium 4 and Northwood are trademarks of ntel Corporation.

• V A , V A Apollo P4X266, V A Appolo P4X266A and VT8233 are trademarks of V A

Technologies, nc.

85DRV2

SOLTEK AROUND THE WORLD

SOLTEK COMPUTER INC.

Address : 7F, No. 306-3, Ta-Tung Rd, Sec.1, Hsi-Chih, Taipei-

Hsien, Taiwan, R.O.C.

Telephone : 886-2-2642-9060

Fax : 886-2-2642-9065

E-mail : [email protected]

Web site : http://www.soltek.com.tw

SOUL TECHNOLOGY EUROPE B.V.

Address : Hongkongstraat 55, 3047 BP Rotterdam. The Neth-

erlands

Telephone : 31-10-2457492

Fax : 31-10-2457493

E-mail : [email protected]

Web site : http://www.soultech-europe.com

SOLTEK KOREA INC.

Address : 1002, Chung Jin Bldg. 53-5 Wonhyo-Ro, 3-Ka,

Yongsan-Ku Seoul 140-113, Korea

Telephone : 82-2-32717400

Fax : 82-2-32717405

E-mail : [email protected]

Contents

Chapter 1 Specification ........................................... 10

1-1 Mainboard Specifications ..................................................... 11

1-1.1 CPU Socket ................................................................................... 11

1-1.2 Syste Chipsets ........................................................................... 11

1-1.3 Me ory ......................................................................................... 11

1-1.4 AWARD BIOS V6.0 ..................................................................... 11

1-1.5 Accelerated Graphics Port (AGP) Interface........................... 11

1-1.6 Advanced syste Power Manage ent, supporting: ............ 12

1-1.7 Multi-I/O Functions: ................................................................... 12

1-1.8 Expansion Slots ............................................................................ 12

1-1.9 Hardware Monitor on board ..................................................... 13

1-1.10 AC’97 Audio Codec on board .................................................. 13

1-1.11 CNR Slot on board .................................................................... 13

1-1.12 Redstor Overclocking Technology ...................................... 13

1-1.13 For Factor................................................................................ 13

1-2 Mainboard Specification Table ........................................... 14

1-3 Chipset Syste Block Diagra ........................................... 15

Chapter 2 Hardware Setup ..................................... 17

2-1 CPU Installation with Socket 478 ....................................... 18

2-2 Pentiu 4 CPU Fan Installation: ....................................... 19

2-3 Me ory Installation ............................................................. 20

2-3.1 To Install DDR SDRAM Module for this Series : .................. 20

2-3.2 To Re ove a DIMM:................................................................... 21

2-3.3 Indicator ZD1 DIMM Socket On: ............................................ 21

2-4 AGP (Accelerated Graphics Port) Card Installation : .... 22

2-5 HDD/FDD Installation .......................................................... 23

Contents

2-6 ATX V 2.03 Power Supply Installation .............................. 25

2-7 Ju per and Switch Settings ................................................ 26

2-7.1 Switch 1 CPU Clock Select ........................................................ 27

2-7.2 JBAT1 Clear CMOS.................................................................... 28

2-7.3 Jp10 CPU Clock Select:.............................................................. 28

2-7.4 Jp16 Suspend to RAM (STR) .................................................... 29

2-7.5 Jp11 Flash ROM Write Protection Select ............................... 29

2-8 Other Connectors Configuration........................................ 30

2-8.1 On Board FAN Connectors ........................................................ 30

2-8.2 WOL1 Wake On LAN ................................................................. 31

2-8.3 CD-ROM Audio Connector CD_IN1........................................ 31

2-8.4 Chassis Panel Connector ............................................................ 32

2-8.5 Ther al Sensor Connector RT1, RT2 ..................................... 33

2-8.6 Co plex Header .......................................................................... 34

2-8.7 Co unication And Networking Riser Slot (CNR) ............. 36

2-8.8 USB Ports and USB Headers (Header USB 2 & 3)............... 37

2-8.9 PS/2 Mouse And PS/2 Keyboard ............................................... 37

2-9 IRQ Description..................................................................... 38

Chapter 3 Software Setup ....................................... 40

3-1 Open up Suport CD: ............................................................. 41

3-2 Proceed to VIA 4-IN-1 Drivers Installation ..................... 42

3-3 Proceed to AC’97 AUDIO Driver Installation.................. 44

3-4 Proceed to Hardware Monitor Installation....................... 45

Chapter 4 BIOS Setup............................................. 48

4-1 About BIOS Setup ................................................................. 49

4-2 To run BIOS Setup ................................................................ 49

4-3 About CMOS .......................................................................... 49

4-4 The POST ( Power On Self Test ) ....................................... 49

Contents

4-5 To upgrade BIOS ................................................................... 50

4-5.1 Before Upgrading BIOS ............................................................. 50

4-5.2 Upgrade Process........................................................................... 50

4-6 BIOS SETUP --- CMOS Setup Utility................................ 53

4-6.1 CMOS Setup Utility .................................................................... 53

4-6.2 Standard CMOS Setup ............................................................... 54

4-6.3 Advanced BIOS Features ........................................................... 57

4-6.4 Advanced Chipset Features ....................................................... 61

4-6.5 Integrated Peripherals................................................................ 66

4-6.6 Power Manage ent Setup ......................................................... 72

4-6.7 PNP / PCI Configuration............................................................ 78

4-6.8 S artDoc Anti-burn Shield (PC Health status)..................... 81

4-6.9 Frequency/Voltage Control ....................................................... 83

4-6.10 Load Opti ized Defaults ........................................................ 85

4-6.11 SET SUPERVISOR / USER PASSWORD............................. 86

4-6.12 SAVE & EXIT SETUP.............................................................. 87

4-6.13 EXIT WITHOUT SAVING ...................................................... 87

Appendices ............................................................... 89

Appendix-1 Identify BIOS Version & BIOS Part Nu ber ... 90

Appendix-2 Identify Mainboard Model Nu ber ................... 91

Appendix-3 Technical Ter s ...................................................... 92

Contents

85DRV2

Mainboard

Support CD

Bundled Bonus Pack CD

Bundled Bonus Pack Manual

Temperature Sensor Cable (Optional)

ATA66/100 DE Cable

FDD Cable

User’s Manual

RS232 Cable

ITEM CHECKUP

Chapter 1 Specification

85DRV2 -- Components Locations

USB1

COM1

COM2

M C L NE

OUT

L NE

DIM 3

FDC

IDE1

IDE2

PCI 1

PCI 2

PCI 3

PCI 4

PCI 5

PCI 6

SCR1

CNR

Battery

FLASH BIOS

FAN3

FAN4

AGP 4X

LPC I/O

Controller

Clock

Generator

VT8233

CD_IN1

SPK RST

SMI

HDD/LED IR PWR

WOL1

USB3USB2

ZD1

Main Power

RT2

RT1

1 2

3 4

J2 Aux Power

FAN1

FAN2

SW1

ON DIP

1 2 3 4

JBAT1

PGA478B

1 3

JP11

VIA

VT1611A

AC'97

Audio

SUS LED

PWR LED

LPT1

GAME/M D PORT

PS/2 K/B

Mouse

(on top)

PS/2

(underside)

JP15 JP16

USB0

(on top)

(underside)

DIM 1

DIM 2

VIA

P4X266A

VIA

JP10

+12V Power

85DRV2

This series of mainboards features an integration of the powerful

processor ntel Pentium 4 and the single-chip North Bridge V A P4X266A

plus South Bridge VT8233, by which V A P4X266A upgrades the whole

system performance with 100MHz base frequency to support 4 x 100

MHz system bus.

The ntel P4 processor is a rapid execution engine providing 400MHz

quadpumped system bus to allow 3.2GB data transfer rates possible,

while V A Apollo P4X266A North Bridge plus VT8233 South Bridge sup-

ports ntel P4 processor to implement the AGP 4X external bus, the

LPC Super /O and the DDR SDRAM data transfer. This chapter is to

introduce to users every advanced function of this high performance

integration.

Topics included in this chapter are:

1-1 Mainboard Specifications

1-2 Mainboard Layout

1-3 Mainboard Specification Table

1-4 Chipset Diagram

Introduction

Chapter 1 Specification

1-1.1 CPU Socket

CPU Socket 478B on board, supporting ntel® Pentium 4 and North-

wood processors in the 478-pin package for :

• 533/400 MHz System Bus;

• Hyper pipelined technology;

• Advanced dynamic execution;

• Advanced transfer cache;

1-1.2 System Chipsets

North Bridge V A P4X266A plus South Bridge VT8233 to work with ntel

Pentium 4 Processor for managing and arbitrating operations between

all system interfaces.

1-1.3 Memory

3 DDR D MM 184-pin sockets on board for PC2100 and PC1600 DDR

SDRAMs, at 64bit data transfer rate (D MM voltage selectable in B OS

setup):

• P4X266A directly supporting pseudo-synchronous SDRAM up to 1.5GB

unbuffered DDR SDRAMs or 3GB registered DDR SDRAMs.

• nstallation of mixed volumes of DDR SDRAM modules supported .

1-1.4 AWARD BIOS V6.0

• Supporting Plug & Play V1.0;

• Flash Memory for easy upgrade;

• Supporting B OS writing protection and Year 2000 compliant;

• B OS Setup supported (Please see Chapter 4 B OS Setup);

1-1 Mainboard Specifications

1-1.5 Accelerated Graphics Port (AGP) Interface

AGP Controller is embedded in chip, supporting:

• 1.5V/4X, 3.3V/2X power mode , AGP voltage selectable in B OS Setup;

• 2x/ 4x AD and SBA signalling, AGP pipelined split-transection long-

burst transfers up to 1GB/sec.;

• AGP v2.0 compliant;

85DRV2

1-1.7 Multi-I/O Functions:

• PC E DE Controller, supporting:

-- 2x Ultra ATA100 / 66 / 33 DE Connectors supporting up to 4 DE devices;

• Dedicated R Functions:

-- Third serial port dedicated to R function either through the two complete

serial ports or the third dedicated port nfrared- rDA (HPS R) and ASK

(Amplitude Shift Keyed) R.

• Multi-mode parallel Data transfer:

-- Standard mode, ECP and EPP support;

• Floppy Disk connector:

-- One FDD connector with drive swap support;

• Universal Serial Bus Transfer Mode:

-- USB V1.1 compliant;

-- 2 built-in USB connectors and two USB Headers (USB2, USB3) which

require two optional USB cables to provide 4 more optional USB ports;

• PS/2 Keyboard

• PS/2 Mouse

• UARTs (Universal Asynchronous Receiver / Transmitter):

-- Two complete Serial Ports (COM1 & COM2) on board;

1-1.8 Expansion Slots

• Six PC bus Master slots;

• One AGP 4x/2X slot;

• One CNR slot (supporting Modem / Audio Riser only);

• Three DDR D MM slots;

1-1.6 Ad anced system Power Management, supporting:

• ACP 1.0B compliant (Advanced Configuration and Power nterface);

• APM V1.2 compliant (Legacy power management);

• ACP STR mode (Suspend To RAM) , POS (Power On Suspend) and STD

(Suspend to Disk);

• Wake On Modem (External) and Wake On LAN supported by Ring Power

On Control;

• Real time clock (RTC) with date alarm, month alarm, and century field.

• USB wake-up Function;

Chapter 1 Specification

1-1.9 Hardware Monitor on board

Programmable hardware status, to provide monitoring and alarm for

flexible desktop management of hardware temperatures. Utility Soft-

ware is enclosed in Support CD to help display monitoring statuses of:

-- 9 voltages, 2 types of hardware temperatures, 2 Fan speeds;

1-1.10 AC’97 Audio Codec on board

AC’97 Audio codec supported by AC97 Link on chip VT8233;

1-1.11 CNR Slot on board

CNR Slot on board for Modem Riser card or Audio Riser Card;

1-1.12 Redstorm O erclocking Technology

Redstorm Overclocking Tech is a program embedded in B OS for CPU

automatic overclocking. Please see “ Freguency / Voltage Control “ of

B OS Setup for Redstorm Overclocking Technology setting.

1-1.13 Form Factor

• ATX form factor, ATX spec. version 2.03 compliant, supported by one

Main Power Connector, one +12V Power Connector and one Aux Power

Connector;

• Mainboard size: 305mm x 245mm;

85DRV2

Model/Series 85DRV2

Memory

Controller Hub North Bridge V A P4x266 A

South Bridge V A VT8233

TE T8705F

Controller Hub

/O Chip

AGP nterface AGP 4X / 2X Mode

Memory Supporting Registered 3GB or unbuffered 1.5GB

DDR SDRAMs with 3 DDR D MM Slots

Audio

Onboard DE 2 x UATA 33/66/100 DE ports

/O Connectors

Yes

6 x USB ports, 1 x FDD port, 2 x COM ports,

PC slot 6 PC Master Slots

CNR slot 1 x CNR slot

Hardware

B OS writin

Keyboard power

on function &

USB wake up

Function

AC'97 Audio Codec

CPU Socket Socket PGA478B for ntel Pentium 4 478-pin package CPU

1 x LPT port, 1 rDA, 1 PS/2 Mouse, 1 PS/2 K/B

Protection

Monitoring

1-2 Mainboard Specification Table

Chapter 1 Specification

Intel Pentium 4 + VIA P4X266A + VT8233 Diagram

1-3 Chipset System Block Diagram

Single-chip

Pentiu 4

DDR

PC2100/1600 DDR Memory Bus

ATA33/66/100

PS/2 keyboard

PCI Bus

P4x266A

North Bridge

CPU

AGP

Slot

33/400 MHz FSB

SM Bus

LPC

66MHz QDR, 8Bit V-Link

Super I/O

Serial / IR

Parallel

Floppy Disk

PCI Slots

478-pin package

Modem Codec

CNR Slot

Game Port

H/W Monitor

BIOS

VT8233

V-Link

Client South

Intel

AGP 2X/4X Bus

SDRAMs

6x USB

AC'97 Audio

PS/2 Mouse

85DRV2

MEMO

Chapter 2 Hardware Setup

1. We recommend to install your CPU before any other components.

For detailed installation instructions of processor, you can also refer

to the pamphlet enclosed in your CPU package.

2. nstalling a cooling fan with a good heatsink is a must for proper heat

dissipation for your CPU. Get ready an appropriate fan with heatsink

for proper installation. mproper fan and installation will damage your

CPU.

3. n case CPU Vcore, CPU clock or Frequency Ratio is adjustable on

board, please follow the instructions described in the User manual

for proper setup. ncorrect setting will cause damage to your CPU.

The following topics are included in this chapter:

2-1 Pentium 4 CPU Installation

2-2 Pentium 4 CPU Fan Installation

2-3 Memory Installation

2-4 HDD/FDD Installation

2-5 AGP (Accelerated Graphic Port) Installation

2-6 ATX 2.03 Power Supply Installation

2-7 Jumper Settings

2-8 Other Connectors Configuration

To Get things ready for Hardware setup !

85DRV2

mPGA478B

Pin 1

2-1 CPU Installation with Socket 478

This mainboard is built with CPU Socket 478 ( 47-pin) supporting the

ntel Pentium 4 CPU:

• Follow the steps described in this section to install the 478-pin Pentium 4

CPU into the on board Socket 478.

• After installation of Pentium 4 CPU, you must also install the specific

Pentium 4 CPU fan designed in tandem with this CPU. This CPU Fan

installation is described in next section.

1. First pull sideways the lever of

Socket 478, and then turn it up

900 so as to raise the upper layer

of the socket from the lower

platform.

3. Make sure that all CPU pins have

completely entered the socket

and then lower down the lever

to lock up CPU to socket.

2. Configure Pin 1 of CPU to Pin 1

of the Socket, just as the way

shown in the diagram on the left.

Adjust the position of CPU until

you can feel all CPU pins get

into the socket with ease.

mPGA478B

ntel Pentium 4

mPGA478B

ntel Pentium 4

Pin 1

Chapter 2 Hardware Setup

Connect to CPU FAN connector

Press down 4 latches to lock fan to fanbase

Pentium 4 Fanbase CPU Fan Connector

2-2 Pentium 4 CPU Fan Installation:

85DRV2

2-3 Memory Installation

• This mainboard only supports up to 3GB registered DDR SDRAM or 1.

5GB unbuffered DDR SDRAM, with 3 DDR D MM sockets on board. Do

not insert other type of modules into these sockets.

• DDR D MM socket has 184-pins and one notch. nsert a DDR SDRAM

vertically into the 184-pin socket with the notch matching the one in the

socket. Press the Module down in a gradual way until it surely reaches

the bottom and clicks straight up the two latches on the left and right of

the socket. f any one of the latches has not turned up completely, you

should unplug the module and press it down the socket a bit more firmly.

How to tackle with the memory Modules:

• Make sure to unplug your power supply before adding or removing

memory module. Failure to do so may cause severe damage to both

your main board and the memory module.

• Pay attention to the orientation of the D MM slots. Forcing a D MM in a

socket improperly will damage the memory module and socket.

• Make sure you have the right type of memory module for your mainboard.

184-Pin DIMM Notch Key Definitions (2.5V)

DRAM Key Position Voltage Key Position

2.5V

Module Latch

2-3.1 To Install DDR SDRAM Module for this Series :

Table of contents

SOLTEK SL-85DRV2 User manual