Sony TRINITRON KV-29FS60A User manual

1
SERVICE MANUAL AE-5 CHASSIS
MODEL
COMMANDER DEST CHASSIS NO.
MODEL
COMMANDER DEST CHASSIS NO.
®
KV-29FS60A
RM-891 Italian SCC-Q12E-A
KV-29FS60B
RM-891 French SCC-Q13E-A
KV-29FS60D
RM-891 AEP SCC-Q11E-A
KV-29FS60E
RM-891 Spanish SCC-Q14E-A
KV-29FS60K
RM-891 OIRT SCC-Q16G-A
KV-29FS60R
RM-891 OIRT SCC-Q16H-A
KV-29FS60U
RM-891 UK SCC-Q15D-A
KV-32FS60A
RM-891 Italian SCC-Q12F-A
KV-32FS60B
RM-891 French SCC-Q13F-A
KV-32FS60D
RM-891 AEP SCC-Q11F-A
KV-32FS60E
RM-891 Spanish SCC-Q14F-A
MICROFILM
TRINITRON
®
COLOR TV

2
[PICTURE TUBE]
KV-29FS60 FD Trinitron
Approx. 72 cm (29 inches)
(Approx. 68 cm picture measured
diagonally)
102 degree deflection
KV-32FS60 FD Trinitron
Approx. 82 cm (32 inches)
(Approx. 76 cm picture measured
diagonally)
102 degree deflection
Input/Output Terminals
[REAR]
21-pin Euro connector (CENELEC standard).
- Inputs for Audio and Video signals.
- Inputs for RGB.
- Outputs of TV Video and Audio signals.
21-pin Euro connector
- Inputs for Audio and Video signals.
- Inputs for S video.
- Outputs forVideo and Audio signals (selectable).
21-pin Euro connector
- Inputs for Audio and Video signals.
- Inputs for S video.
External speaker terminals : 2-pin DIN (5)
[FRONT]
3 Video output - phono jack
3Audio inputs - phono jacks
3 S Video input - 4 pin DIN
Headphone jack : stereo minijack
Sound output 2x25W (Music Power)
Power requirements 220 - 240V
Dimensions
KV-29FS60 Approx 738 x 588 x 507 mm (w/h/d)
KV-32FS60 Approx 867 x 564 x 558 mm (w/h/d)
Weight
KV-29FS60 Approx 55kg
KV-32FS60 Approx 68kg
Supplied accessories RM-891 Remote Commander (1)
IEC designated R6 battery (2)
Other features NICAM*, FASTEXT, TOPTEXT
* (KV-29FS60B/29FS60E/29FS60K/
29FS60U/32FS60B/32FS60E only)
ITEM MODEL Television System Stereo System Channel Coverage Color System
Italian B/G/H,D/K GERMAN Stereo ITALIA VHF : A-H2 (C) UHF : 21-69 PAL
B/G/H VHF : E2-E12 UHF : E21-E69
CABLE TV (1) : S1-S41
CABLE TV (2) : S01-S05,M1-M10,U1-U10
DK VHF : R01-R12 UHF : R21-R69
PAL, SECAM
NTSC4.43, NTSC3.58
(VIDEO IN)
French B/G/H, D/K,L,I GERMAN/NICAM
Stereo
L VHF : F02-F10 UHF : F21-F60
CABLE : B-Q B/G/H VHF : E2-E12
UHF : E21-E69
CABLE TV (1) : S1-S41
CABLE TV (2) : S01-S05, M1-M10, U1-U10
ITALIA VHF : A-H2 (C) UHF : 21-69
I UHF : B21-B69
PAL, SECAM
NTSC4.43, NTSC3.58
(VIDEO IN)
AEP B/G/H, D/K GERMAN Stereo PAL B/G/H/ VHF : E2-E12 : E21-E69
CABLE TV (1) : S1-S41
CABLE TV (2) : S01-S05, M1-M10, U1-U10
ITALIA VHF : A-H2 (C) UHF : 21-69
D/K VHF : R01-R12 UHF : R21-R69
PAL, SECAM
NTSC4.43, NTSC3.58
(VIDEO IN)
Spanish B/G/H, D/K GERMAN/NICAM
Stereo
PAL B/G/H/ VHF : E2-E12 : E21-E69
CABLE TV (1) : S1-S41
CABLE TV (2) : S01-S05, M1-M10, U1-U10
ITALIA VHF : A-H2 (C) UHF : 21-69
PAL, SECAM
NTSC4.43, NTSC3.58
(VIDEO IN)
OIRT B/G/H, D/K
KV-29FS60K
GERMAN/NICAM
Stereo
KV-29FS60R
GERMAN Stereo
B/G/H/ VHF : E2-E12 UHF : E21-E69
CABLE TV (1) : S1-S41
D/K VHF : R01-R12 UHF : R21-R69
PAL, SECAM
NTSC4.43, NTSC3.58
(VIDEO IN)
UK I NICAM Stereo UHF : B21-B69 PAL
NTSC4.43, NTSC3.58
(VIDEO IN)
MODEL 29FS60A 29FS60B 29FS60D 29FS60E 29FS60K 29FS60R 29FS60U 32FS60A 32FS60B 32FS60D 32FS60E
Power
Consumption 149Wh 148Wh 148Wh 148Wh 148W 148W 148Wh 144Wh 149Wh 149Wh 149Wh
1
2S
3S

3
WARNING (KV-29FS60U only)
The flexible mains lead is supplied connected to a B.S. 1363 fused plug
having a fuse of 5 AMP capacity. Should the fuse need to be replaced,
use a 5 AMP FUSE approved by ASTA to BS 1362, ie one that carries the
mark.
IF THE PLUG SUPPLIED WITH THIS APPLIANCE IS NOT SUITABLE
FOR THE OUTLET SOCKETS IN YOUR HOME, IT SHOULD BE CUT
OFF AND AN APPROPRIATE PLUG FITTED. THE PLUG SEVERED
FROM THE MAINS LEAD MUST BE DESTROYED AS A PLUG WITH
BARED WIRES IS DANGEROUS IF ENGAGED IN A LIVE OUTLET
SOCKET.
When an alternative type of plug is used it should be fitted with a 5 AMP
FUSE, otherwise the circuit should be protected by a 5 AMP FUSE at the
distribution board.
ASA
T
How to replace the fuse.
Open the fuse compartment with
a screwdriver blade and replace
the fuse.
FUSE
Model Name
Item
KV-29FS60A
KV-32FS60A
KV-29FS60B
KV-32FS60B
KV-29FS60D
KV-32FS60D
KV-29FS60E
KV-32FS60E KV-29FS60K KV-29FS60R KV-29FS60U
Pal Comb ON ON ON ON ON ON ON
PIP OFFOFFOFFOFFOFFOFFOFF
RGB Priority ON ON ON ON ON ON ON
Woofer Box OFFOFFOFFOFFOFFOFFOFF
Scart 1 ON ON ON ON ON ON ON
Scart 2 ON ON ON ON ON ON ON
Front in (3) ON ON ON ON ON ON ON
Scart 4 ON ON ON ON ON ON ON
Projector OFFOFFOFFOFFOFFOFFOFF
AKB in 16:9 mode ON ON ON ON ON ON ON
Norm B/G ON ON ON ON ON ON OFF
Norm I OFF ON OFF OFF OFF OFF ON
Norm D/K ON ON ON ON ON ON OFF
Norm AUS OFFOFFOFFOFFOFFOFFOFF
Norm L OFF ON OFF OFF OFF OFF OFF
Norm SAT OFFOFFOFFOFFOFFOFFOFF
Norm M OFFOFFOFFOFFOFFOFFOFF
Teletext ON ON ON ON ON ON ON
Nicam Stereo OFF ON OFF ON ON OFF ON
Language Preset Italian French German Spanish OIRT OIRT English
[RM-891]
Remote control system Infrared control
Power requirements 3V dc
2 batteries IEC designation
R6 (size AA)
Dimensions Approx 210x56x24mm (w/h/d)
Weight Approx 110g (Not including battery)
Design and specifications are subject to change without notice.

4
21 pin connector
Connected Not Connected (open) * at 20Hz - 20kHz
L/G/S/I R/D/D/D
S33
3
R/D/D/D L/G/S/I
R/D/D/D
L/G/S/I
2S2
13S3
1/
S
G
S
19
17
15
13
11
9
7
5
3
1
20
18
16
14
12
10
8
6
4
2
21
Pin No 124 Signal Signal level
1Audio output B
(right) Standard level : 0.5V rms Output impedence : Less than 1kohm*
2Audio output B
(right) Standard level : 0.5V rms Output impedence : More than 10kohm*
3Audio output A
(left) Standard level : 0.5V rms Output impedence : Less than 1kohm*
4Ground (audio)
5Ground (blue)
6Audio input A
(left) Standard level : 0.5V rms Output impedence : More than 10kohm*
7Blue input 0.7 +/- 3dB, 75 ohms positive
8Function select
(AV control)
High state (9.5-12V) : Part mode
Low state (0-2V) : TV mode
Input impedence : More than 10K ohms
Input capacitance : Less than 2nF
9Ground (green)
10 Open
11 Green Green signal : 0.7 +/- 3dB, 75 ohms,
positive
12 Open
13 Ground (red)
14 Ground (blanking)
15
_ _ Red input 0.7 +/- 3dB, 75 ohms, positive
_ (S signal Chroma
input) 0.3 +/- 3dB, 75 ohms, positive
16 Blanking input
(Ys signal) High state (1-3V) Low state (0-0.4V) Input impedence : 75 ohms
17 Ground (video
output)
18 Ground (video
input)
19 Video output 1V +/- 3dB, 75ohms, positive sync 0.3V
(-3+10dB)
20
_ _ Video input 1V +/- 3dB, 75ohms, positive sync 0.3V
(-3+10dB)
_ Video input
Y (S signal) 1V +/- 3dB, 75ohms, positive sync 0.3V (-3+10dB)
21 Common ground
(plug, shield)
Signal
Ground
Ground
Y (S signal) input
C (S signal) input
Pin No.
1
2
3
4
Signal Level
1V 3dB 75 ohm, positive Sync. 0.3V -3 + 10dB
0.3V 3dB 75 ohm, positive Sync.

5
AE-5 SELF DIAGNOSTIC SOFTWARE
The identification of errors within the AE-5 chassis is triggered in one of two ways :- 1: Busy or 2: Device failure to respond to IIC. In the event
of one of these situations arising the software will first try to release the bus if busy (Failure to do so will report with continuous flashing LED) and
then communicate with each device in turn to establish if a device is faulty. If a device is found to be faulty the relevant device number will be dis-
played through the LED (Series of flashes which must be counted) See table 1., non fatal errors are reported using this method.
ERROR LED
ERROR
COUNT
No error 00
Not allowed (may be confused with Sircs response
flash!) 01
Over Current Protection 02
Over Voltage Protection 03
Vertical Protection 04
AKB 05
H - Protection 06
Speaker Protection 07
General IIC Line 0 error 08
MEGATEXT 09
NVM 10
Main colour decoder 11
Feature Box 12
D/A converter 13
Backend 14
Multi sound processor 15
Auto Wide 16
External RAM 17
StBy LED
ON ON ON
OFF OFF
Flash Timing Example : e.g. error number 3
Diagnostic Item
Description No of times Standby LED Flashes Probable cause Location Detected Symptoms
Power does not turn on Does not light Power cord is not plugged in
Fuse is burned out Power does not come on No power is supplied to the TV
AC power supply is faulty
+B Overcurrent (OCP) 2 times H.OUT (Q6803/6804) is shorted. (D Board)
Linearity FET (Q6806) is shorted. (D Board)
IC6604 Power IC is shorted. (D Board)
Power does not come on
Load on power line has shorted
Vertical Deflection stopped 4 times +15V is not supplied R6835 open (D Board)
-15V is not supplied R6834 open (D Board)
IC6700 is shorted (D Board)
Vertical deflection pulse has stopped
Power line has shorted

6
ERROR DETECTION MONITOR
Device acknowledge is used to check IIC errors. Device acknowledge is checked by sending an IIC start sequence during CRT power on. Each
device is checked three times, if there is no acknowledge after every attempt, it will be regarded as an error.
There are three steps to check errors
1. IIC line 0
If all devices except the NVM have errors, IIC line 0 error is displayed
2. Board check
If all devices mounted on one board have errors, board error is displayed
3. Each device check
If IIC line error and board error are not detected then the device with an error is displayed
The detected errors can be displayed as follows:
1. Error Monitor Menu
2. Error Reader
1. ERROR MONITOR MENU
The error monitor menu is displayed by selecting TT33. The following menu will be displayed:
ERROR MONITOR
Operating Time :
930360h 15h
Saved Errors :
1. 100h = A-Board
2. 401h = BP-B CXD2069 MID
3. 704h = J-B TDA9320 Main Col Dec
4. 000h = no error occured
5. 000h = no error occured
Actual Error :
New error code sequence is starting
Ignore Errors : [off]

7
2. ERROR READER DISPLAY
The error reader display is connected to the service connector to read actual error codes. The part number for the error reader display is S-188-900-10.
Once an error has been detected it will then be displayed on the two digit error reader. The errors displayed refer to the following table :
Send Data to Error Reader
Error Code Data high Data Low Error type Function
00 00h - f0h no device
Gen.IIC Error
00 01h f0h 01h IIC 0 line
00 02h f0h 02h IIC 1 line not used
Board Error
01 00h f1h 00h A Board
02 00h f2h 00h B1 Board
03 00h f3h 00h B2 Board
04 00h f4h 00h BP Board
05 00h f5h 00h D1 Board
06 00h f6h 00h E Board
07 00h f7h 00h J Board
Device Error
A Board
01 01h f1h 01h CXA1875 Port Expander
01 02h f1h 02h TU1326 Main Tuner
01 03h f1h 03h TU1350 Sub Tuner
B1 Board
02 01h f2h 01h P83C654 Feature Box
02 02h f2h 02h SDA9280 D/A Converter
B2 Board
03 01h f3h 01h SAA4977 Basic
03 02h f3h 02h SAA4950 Memory
BP Board
04 01h f4h 01h CXD2069 MID
D1 Board
05 01h f5h 01h CXA8070 Dynamic Conv.
05 02h f5h 02h CXA1875 Port Expander
E Board
06 01h f6h 01h CXD2100 Backend
J Board
07 01h f7h 01h CXD2057 Auto Wide
07 02h f7h 02h SDA9288 PIP
07 03h f7h 03h TDA9320 Sub Colour
07 04h f7h 04h TDA9320 Main Colour
07 05h f7h 05h CXA1875 Sub Sound
07 06h f7h 06h TDA7309 HP Amp
07 07h f7h 07h TEA6422DT Audio SW
07 08h f7h 08h MSP3410D Sound Proc
07 09h f7h 09h TC9337F Sound DSP

8
TABLE OF CONTENTS
CAUTION
SHORT CIRCUIT THE ANODE OF THE PICTURE TUBE AND THE
ANODE CAP TO THE METAL CHASSIS, CRT SHIELD, OR THE
CARBON PAINTED ON THE CRT, AFTER REMOVAL OF THE
ANODE CAP
WARNING !!
AN ISOLATING TRANSFORMER SHOULD BE USED DURING ANY
SERVICE WORK TO AVOID POSSIBLE SHOCK HAZARD DUE TO
LIVE CHASSIS. THE CHASSIS OF THIS RECEIVER IS DIRECTLY
CONNECTED TO THE POWER LINE.
SAFETY-RELATED COMPONENT WARNING !!
COMPONENTS IDENTIFIED BY SHADING AND MARKED ON
THE SCHEMATIC DIAGRAMS, EXPLODED VIEWS AND IN THE
PARTS LIST ARE CRITICAL FOR SAFE OPERATION. REPLACE
THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION
APRES AVOIR DECONNECTE LE CAP DE’LANODE,
COURT-CIRCUITER L’ANODE DU TUBE CATHODIQUE ET
CELUI DE L’ANODE DU CAP AU CHASSIS METALLIQUE
DE L’APPAREIL, OU AU COUCHE DE CARBONE PEINTE
SUR LE TUBE CATHODIQUE OU AU BLINDAGE DU TUBE
CATHODIQUE.
ATTENTION !!
AFIN D’EVITER TOUT RISQUE D’ELECTROCUTION PROVENANT
D’UN CHÁSSIS SOUS TENTION, UN TRANSFORMATEUR
D’ISOLEMENT DOIT ETRE UTILISÈ LORS DE TOUT DÈPANNAGE.
LE CHÁSSIS DE CE RÈCEPTEUR EST DIRECTMENT RACCORDÈ
Á L’ALIMENTATION SECTEUR.
ATTENTION AUX COMPOSANTS RELATIFS Á LA
SÈCURITÈ !!
LES COMPOSANTS IDENTIFIÈS PAR UNE TRAME ET PAR UNE
MARQUE SUR LES SCHÈMAS DE PRINCIPE, LES VUES
EXPLOSÈES ET LES LISTES DE PIECES SONT D’UNE IMPORTANCE
CRITIQUE POUR LA SÈCURITÈ DU FONCTIONNEMENT, NE LES
REMPLACER QUE PAR DES COMPSANTS SONY DONT LE NUMÈRO
DE PIÈCE EST INDIQUÈ DANS LE PRÈSENT MANUEL OU DANS
DES SUPPLÈMENTS PUBLIÈS PAR SONY.
Section Title Page Section Title Page
Warning and Caution .....................3
Self-Diagnostic Function .....................5
1. GENERAL
Overview .....................9
Installation .....................10
Advanced Operations .....................11
Teletext .....................16
2. DISASSEMBLY
2-1. Rear Cover Removal .....................17
2-2. Chassis Assy Removal .....................17
2-3. Service Position .....................17
2-4. U Board Removal .....................17
2-5. J Board Removal .....................18
2-6. J Shield Removal .....................18
2-7. B1 Board Removal .....................18
2-8. Picture Tube Removal .....................19
Removal and Replacement of the
Main-Bracket bottom plates .....................20
3. SET-UP ADJUSTMENTS
3-1. Beam Landing .....................21
3-2. Convergence .....................22
3-3. Focus .....................24
3-4. Screen [G2] White Balance .....................24
4. CIRCUIT ADJUSTMENTS
4-1. Electrical Adjustments .....................26
4-2. Volume Electrical Adjustments .....................32
4-3. Test Mode 2 .....................33
5. DIAGRAMS
5-1. Block Diagram (1) .....................35
Block Diagram (2) .....................40
Block Diagram (3) .....................45
Block Diagram (4) .....................50
5-2. Circuit Board Location .....................55
5-3. Schematic Diagrams and
Printed Wiring Boards .....................55
* C Board .....................57
* J Board .....................65
* U Board .....................74
* A Board .....................81
* BP Board .....................85
* VM Board .....................92
* B1 Board .....................95
* D1 Board .....................99
* F Board .....................103
* F1 Board .....................106
* M Board .....................107
* E Board .....................111
* D Board .....................116
* H1 Board .....................122
5-4. Semiconductors .....................125
5-5. IC Blocks .....................128
6. EXPLODED VIEWS
6-1. Chassis .....................129
6-2. Picture Tube .....................131
7. ELECTRICAL PARTS LIST .....................133

9
SECTION 1
GENERAL The operating instructions mentioned here are partial abstracts from the Operating
Instruction Manual. The page numbers of the Operating Instruction Manual remain
as in the manual.
28
Overview
This section briefly describes the buttons and controls on the TV set and the Remote Control.
Open the flaps at the front and back of his Instruction Manual for detailed illustrations.
For more information refer to the page numbers given in the overview.
Remote Control
Symbol Description See page
1TV
I/ uTV: standby mode on/off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
2
+
;
TV: on-screen display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Teletext: index page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
3Selecting of input source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
R Teletext: Freezing a subpage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
4
Å/a
PIP: Swapping the screens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
5>PIP: Selecting the source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
6
´/´
PIP: Switching on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
71, 2, … 9, 0 Number buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
8Back to the channel last selected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
9Selecting of screen format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
0No function on this set
!¡ Joystick for menu selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Press OK to confirm
!™ MENU Switching on and off of Menu system . . . . . . . . . . . . . . . . . . . . . . . . . . 31
!£ PROGR +/– TV: Channel selection up- and downwards . . . . . . . . . . . . . . . . . . . . . 32
Teletext: Page selection up-and downwards . . . . . . . . . . . . . . . . . . . . . 42
!¢ ¸+/– Volume control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
!∞ Picture mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
!§ Equaliser mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
!¶ -/-- Selection of double digit channel numbers . . . . . . . . . . . . . . . . . . . . . . 32
!• Freezing of TV picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
!ª No function on this set
@º f Teletext: Switching on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
@¡
; TV: Selecting of TV mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Teletext: Switching off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
@™
¤ Muting of sound on/off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
@£ VIDEO
I/ uVCR: Standby mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Buttons under cover
@¢
˚ Displaying of the time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
@∞ CH +/– VCR operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
VTR 1 2 3 4 MDP Video equipment selector
0z)pPrButtons for VCR operation
@§
?
Resetting of picture setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
33
TV-set – front and top
Symbol Description See page
A
2 Headphone jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Bq3 S-video input jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
C…3, ≤ 3 Phono video/audio inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
DuIndicator for Standby mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
EUPower switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
F…Selecting input source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
G¸+/– Volume control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
HPROGR +/– Channel selection up- and downwards . . . . . . . . . . . . . . . . . . . . . . 37
ICONTROL Control panel: Switching on/off . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
TV-set – rear
Symbol Description See page
J
Y 1/ 1 21-pin Euro connector (Scart) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
K Y 2/ j 2 21-pin Euro connector (Scart) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
L
Y 3/ j 3 21-pin Euro connector (Scart) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
M ˘ Aerial socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
NR/D/D/D, L/G/S/I, External speaker terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
| , | S, | C (Centre, Surround)
OL/G/S/I ™Left and right speaker terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
R/D/D/D
P
|
L/G/S/I Audio phono jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
R/D/D/D
R/D/D/D L/G/S/I
L/G/S/I R/D/D/D
S
33 3
ED
OP
M NLKJ
A B C
+
–+ –
PROGR
CONTROL
F G H I
R/D/D/D L/G/S/I
R/D/D/D
L/G/S/I
2
S
2
13
S
3
1/
S
G
S

10
31
First Time Operation
Step 2 Basic Presetting
A The Menu System
Your TV uses an on-screen menu system to guide you through the operations.
Use the following buttons on the Remote Control to operate the menu system:
•
Press MENU !™ to switch the menu on and off.
•
Use “, ”, 4, $of the joystick !¡ to select within the menu system.
•
Press OK to store.
•
When menu is switched off:
Press “to return to the last menu screen.
C Automatic Tuning In of Channels
•
Push the joystick !¡ to ”for more than 2 sec..
After all available channels are stored, the TV goes back to the programme
position with which you started the automatic tuning. Your TV is now ready
for use.
v
To stop the automatic tuning: Press OK !¡.
v
If you wish to change the sequence of the stored channels, go to
Sorting Programme Positions in Advanced Presetting.
v
If you need to change or repeat the tuning afterwards (e.g. when you move
house) : select the menu Auto Tuning in the Set Up menu.
1Press the MENU !™ button.
The menu Language/Country appears on the screen.
2Push the joystick !¡ to ”. Push the joystick !¡ to $to select the language.
Press OK !¡.
The menus appear in the selected language.
3Push the joystick !¡ to $to select Country. Push the joystick !¡ to ”.
4Select the country in which you will operate the TV set using $or 4.
Select Off if you wish an automatic tuning without ACI (fast presetting with a
given channel sequence).
•
Confirm by pressing OK !¡.
The menu Auto Tuning appears.
B Selecting Language and Country
Language/Country
Language
Country
Select: Enter:
English
Off
Language/Country
Language
Country
Select: Enter:
Language/Country
Language
Country
Select Country: Confirm: OK
English
Off
Austria
Belgium
Bulgaria
Czech Rep.
Denmark
Finland
English
Off
Set Up
Auto Tuning
Programme Sorting
AV Preset
Installation
Select:
Start Auto Tuning:
Start
1
2
3
4
5
CO2
CO3
CO4
CO7
CO8
Searching
35
B Connecting the TV Set
1Connect the TV set to the mains socket (220-240 V. AC, 50 Hz).
2a Connect a conventional aerial cable to the socket marked ˘Mon the rear of the TV set
or
2b Connect your Satellite Receiver to one of the Scart connectors JKLof the TV set.
When connecting a VCR to your TV set:
We recommend that you use the preset function Manual Programme Preset (page 38) to tune
in the VCR signal to programme position 0.
First Time Operation
Installation
C Inserting the Batteries into the Remote Control
Make sure to insert the batteries using the correct polarities.
Dispose of exhausted batteries according to your local regulations.
D Switching on the TV Set
•
Press the switch UEat the front of the TV set.
If the standby mode indicator uDon the TV is lit, press TV I/u1on the
Remote Control to switch on the TV set.
R/D/D/D L/G/S/I
R/D/D/D L/G/S/I
OUT IN
VIDEO
SAT
ED

11
32
Step 3 Basic TV operation
This section explains the most important functions for the daily use of your TV
set. When using the control panel on the top of the TV set, first press CONTROL
I, then F, Gor H.
Function Operation
Switching on/off
•
Press UEon the TV set.
To save energy, we recommend to switch off the
TV completely when set is not in use.
Switching off temporarily
•
Press TV I/ u1.
(Standby mode) TV is now in standby mode. Indicator uDlights
up.
After 15 min. without any TV signal and no
pressing of a button, the TV automatically goes into
standby mode.
Switch on from standby
•
Press TV I/ u1 , PROGR +/– !£ Hor any number
mode button 7.
Selecting channels
•
Press PROGR +/- !£ Hor the number buttons 7.
For a double
digit number first press -/-- !¶ , then
the two number buttons.
Using the Channel
•
Press OK !¡.
overview Push to $or 4to select a channel, push to zto
confirm.
Going to the channel
•
Press 8.
last selected
Adjusting the volume
•
Press ¸+ or – !¢ G.
Muting the sound
•
Press ¤ @™ to switch sound off or on.
Selecting Equaliser mode
•
Press repeatedly !§ to select one of the
(See also page 39) following modes: Personal, Vocal, Jazz,
Rock, Pop or Flat
Selecting Picture mode
•
Press repeatedly !∞ to select one
(see also page 38) of the following modes: Personal, Movie or Live.
Freezing the picture
•
Press !• if you wish to make a note of an
information, e.g., a telephone number.
Press again to return to the normal TV screen.
Changing the
•
Press 9repeatedly to select 4:3 or 16:9
screen format (imitation of wide screen format).
Resetting picture/sound
•
Open the cover of the Remote Control.
settings to factory levels Press
?
@§.
Displaying on-screen
•
Press
+
;
2to switch indications on or off.
indications
Displaying the time
•
Open the cover of the Remote Control.
(only when teletext is Press ˚@¢ to switch time on or off.
broadcast)
Using Teletext
•
Press f@º to switch on. Press ;@¡ to switch off.
(see also page 42) Select a page using the number buttons 7.
E.g. for page 125 press 1,2 and 5.
Select the index page by pressing
+
;
2.
Viewing the input signal
•
Press …3repeatedly to select the desired input
of a connected device source.
(see also page 44) Press ;@¡ to return to the TV picture.
First Time Operation
J K
+
–+ –
Soul Music
News
Game Show
Animal Report
Stones in Interviev
Pink Panther
Afternoon Report
VIVA
RTL
SAT 1
S3
VIVA 2
PRO 7
ARD
8
9
10
11
12
13
14
33
First Time Operation
Advanced Operation
Advanced Presetting
Sorting of Programme Positions
After having used Automatic Tuning of channels you may wish to rearrange
the order of the channels.
1Press MENU. Select the symbol using $. Push to ”.
2Select Programme Sorting using $. Push to ”to enter.
3Select the programme position of the channel you wish to sort using 4or $.
Push to ”to enter.
4Move the channel to the new programme position using 4or $. Store by
pressing OK.
The channel is now at the new position. The other programme positions
move accordingly.
5To sort other programme positions repeat steps 3 to 4.
6Press MENU to return to the normal TV screen.
Manual Tuning In of Channels
Use this function to preset channels or a video input source one by one to
programme positions of your choice.
1Press MENU. Select the symbol using $. Push to ”.
2Select Installation using $. Push to ”to enter.
Select Manual Programme Preset using $. Push to ”to enter.
3Select the programme position by pushing to 4or $. Push twice to ”.
The column SYS is highlighted.
4Select the TV system using 4or $. Push to ”to enter.
Available TV systems are B/G for western European countries,
D/K for eastern European countries, EXT for a video input source
(please go to step 5c after selecting EXT)
The column CH is highlighted.
5Select your method for the channel tuning using 4or $. Push to ”to enter.
You have the choice between Cfor a terrestrial channel, Sfor a cable channel,
Ffor direct frequency input.
aDirect Channel Input - S, C or F
For channel numbers input a two digit number, for the channel frequency a
three digit number.
•
Select the two or three digits by using the number buttons 0 to 9.
•
To start the search and to store the channel, press OK.
•
To preset other channels repeat steps 3 to 5a.
bChannel search (SEARCH)
Use Search if you do not know the channel number or frequency
•
Start the search for the next available channel by pushing to $.
•
Store the channel by pressing OK or continue the search by pushing again to $.
•
To search for other channels repeat steps 3 to 5b.
cFor video input sources (EXT)
•
Select the Video Input source using 4or $.
•
Store your selection by pressing OK.
•
To allocate other sources repeat steps 3 to 5c.
6Press MENU to return to the normal TV screen.
Programme Sorting
Select Prog.: Confirm:
Set Up
Auto Tuning
Programme Sorting
AV Preset
Installation
Select: Enter:
PROG CH LABEL
Programme Sorting
Select Position: Move: OK
C03 TV 5
PROG CH LABEL
1
2
3
4
5
6
7
8
9
10
11
C03
C05
C07
C08
C09
C11
C12
C13
C14
C15
C16
TV 5
PRO 7
EU-SP
SWF
RTL
SAT
MDR
DDI
DSF
RTL 2
KAB 1
C03
C05
C07
C08
C09
C11
C12
C13
C14
C15
C16
TV 5
PRO 7
EU-SP
SWF
RTL
SAT
MDR
DDI
DSF
RTL 2
KAB 1
1
2
3
4
5
6
7
8
9
10
11
PROG SYS
Off
SKIP LABEL
1B/G
Installation
Select: Enter:
Language/Country
Manual Programme Preset
Further Programme Preset
RGB Set Up
Picture Rotation
Personal ID O
- - - - - - -
Manual Programme Preset
Select: Enter:
PROG CH SYSSKIP LABEL
C09
C10 ARD BBC
B/G
B/G
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
1
2
3
4
5
6
7
8
9
10
11
PROG
Off
SKIP
1B/G
D/K
EXT
CH
C
S
F
CH
SYS LABEL
PROG CH SYS
Off
SKIP LABEL
0EXT AV1
AV2
AV3
AV1
PROG SYS
Off
SKIP LABEL
1B/G
CH
03
SEARCH

12
34
Captioning a Station Name
During presetting the channels are usually labelled automatically.
You can, however, individually name a channel or a video input source.
1Press MENU. Select the symbol using $. Push to ”.
2Select Installation using $. Push to ”to enter.
Select Manual Programme Preset using $. Push to ”to enter.
3Select the programme position of the channel or the video source you wish to
label by pushing to $or 4. Push repeatedly to ”until the first element of the
position LABEL is highlighted.
4Select a number, a letter, + or a blank using 4or $. Push to ”to confirm.
Select the other four characters in the same way.
5Store your selection by pressing OK.
6To label other channels or video sources repeat steps 3 to 5.
7Press MENU to return to the normal TV screen.
Skipping of Programme Positions
In case of 100 programme positions there may be unused positions, which
you can skip in the menu Manual Programme Preset. When changing
channels with the PROGR +/– buttons they do then not appear.
You can, however, still select them using the number buttons.
1Press MENU. Select the symbol using $. Push to ”.
2Select Installation using $. Push to ”to enter.
Select Manual Programme Preset using $. Push to ”to enter.
3Select the programme position you wish to skip by pushing to 4or $.
Push to ”to enter.
The column SKIP is highlighted.
4Select ON using $.
5Store by pressing OK.
6To skip other programme positions repeat steps 3 to 5.
7Press MENU to return to the normal TV screen.
Advanced Operation
Advanced Presetting
Manual Programme Preset
Select: Enter:
PROG CHSYSSKIP LABEL
C09
C10 ARD BBC
B/G
B/G
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
1
2
3
4
5
6
7
8
9
10
11
PROG CHSYS
Off
SKIP LABEL
6 B/G C07 TE
Manual Programme Preset
Select: Enter:
PROG CHSYSSKIP LABEL
PROG CHSYSSKIP LABEL
53 B/G F189 - - -Off
On
C09
C10 ARD BBC
B/G
B/G
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
51
52
53
54
55
56
57
58
59
60
61
40
Selecting your NexTView Provider*
*depending on availability of service
NexTView is an on-screen electronic programme guide, providing you with
programme information on many broadcasters. Your TV set automatically
selects a NexTView provider. This provider will be available about 30 minutes
after the channel tuning. You can however, also select a provider of your choice.
See Using NexTView on page 48 for information on the operation of NexTView.
When using a satellite receiver make sure to connect the receiver to the aerial
socket of your TV set.
1Press MENU. Select the symbol using $. Push zto enter.
2Select Select NexTView using $. Push zto enter.
A list is displayed containing all available NexTView providers and the
supported broadcasters.
3Select the desired NexTView provider by using 4or $. Store by pressing OK.
4Press MENU to return to the normal TV screen.
Using of Further Programme Preset
Using the menu Further Programme Preset you can
a) individually attenuate the strength of a channel signal in case of a strong
local aerial signal (striped picture).
b) individually adjust the volume level of each channel.
c) improve the quality of a weak channel (picture or sound distortions) with
manual fine tuning.
d) preset the AV output for programme positions of those channels with
scrambled signals (e.g. from a Pay TV decoder). In this way a connected
Smartlink VCR records the unscrambled signal.
1Press MENU. Select the symbol using $. Push ”to enter.
2Select Installation using $. Push ”to enter. Select Further Programme Preset
using $. Push ”to enter.
3Select the programme position of the desired channel by pushing 4or $.
Push ”repeatedly to select:
ATT (RF attenuator), VOL (Volume Offset), AFT (Automatic Fine Tuning) or
DECODER.
The selected item changes colour.
4a ATT
Push $to select ON. Store by pressing OK.
Repeat steps 3 and 4a if you wish to attenuate other channels.
b VOL
Push 4or $to adjust the volume level (range -7 to +7) of the channel.
Store by pressing OK.
Repeat steps 3 and 4b if you wish to adjust the volume level of other channels.
c AFT
Push 4or $to fine tune the channel (range -15 to +15). Store by pressing OK.
Repeat steps 3 and 4c if you wish to fine tune other channels.
d DECODER
Push to 4or $to select AV1 (Euro AV socket 1) or AV2 (Euro AV socket 2) as
output for the video source on this programme position. Store by pressing OK.
Repeat steps 3 and 4d if you wish to preset the AV output of other video sources.
Should you use Auto Tuning afterwards, this setting will
be cancelled.
5Press MENU to return to the normal TV screen.
Advanced Operation
Advanced Presetting
Select Next View
EURON
VOX DRS 3SAT ARTE
Channels:
Swiss Text
Euro News
Installation
Select: Enter:
Language/Country
Manual Programme Preset
Further Programme Preset
RGB Set Up
Picture Rotation
Personal ID
Demo
O
- - - - - - -
Further Programme Preset
Select: Enter:
PROG AFTVOLATT DECODER
On
On
On
Off
Off
Off
0
0
0
Off
Off
Off
1
2
3
4
5
6
7
8
9
10
11
PROG AFTVOLATT DECODER
1Off
On
PROG AFTVOLATT DECODER
1On 0
PROG AFTVOLATT DECODER
1On -5 On
PROG AFTVOLATT DECODER
1On -5 On Off
AV1
AV2

13
36
When connecting an RGB source such as a Sony playstation you may need to
readjust the picture geometry.
1Select the connected RGB source by pressing …repeatedly.
2Press MENU. Select the symbol using $. Push to ”.
3Select Installation using $. Push to ”to enter. Select RGB Set Up using $.
Push to ”to enter.
4Select H Centre by pushing to ”. Adjust the centre of the picture
(range from -10 to +10) using 4or $. Store by pressing OK.
5Select H Size using $. Push to ”to enter. Adjust the horizontal coordinates
(range from -10 to +10) using 4or $. Store by pressing OK.
6Press MENU to return to the normal TV screen.
Advanced Presetting
Advanced Operation
Adjusting the Picture Rotation
Because of the earth magnetism the picture might slant. In this case you can
readjust the picture.
1Press MENU. Select the symbol using $. Push to ”.
2Select Installation using $. Push to ”to enter. Select Picture Rotation using $.
Push to ”to enter.
3Adjust the Picture Rotation (adjusting range -5 to +5) by pushing to 4or $.
Store by pressing OK.
4Press MENU to return to the normal TV picture.
Adjusting the Picture Geometry
for an RGB Source
RGB Set Up
Adjust Size: Confirm: OK
H Centre O
H Size O
RGB Set Up
Adjust Position: Confirm: OK
H Centre O
H Size O
Installation
Rotate: Confirm: OK
Language/Country
Manual Programme Preset
Further Programme Preset
RGB Set Up
Picture Rotation
Personal ID O
37
1Press MENU. Select the symbol using $. Push to ”.
2Select AV Preset using $. Push to ”to enter.
3Select the desired AV input (AV 1, 2 or 3) using 4or $. Push to ”enter.
After each step you have the choice between memorizing (press OK) or going to
the next item (push to ”).
4To label the source:
aPush to ”to select Label.
bSelect the first character using 4or $. Push to ”to confirm.
cRepeat step b to select the other 4 characters.
dStore by pressing OK.
5Repeat steps 3 to 4 for the other AV inputs.
6Selecting the AV3 Input Source:
In case of AV3 you have the choice between the front AV3 sockets BCor the
rear Scart 3 Lconnector.
aPush to $to select AV3 Input. Push to ”to enter.
bSelect Front or Rear using 4or $.
cStore by pressing OK.
7Press MENU to return to the normal TV screen.
Presetting and Labelling of Input Sources
Advanced Presetting
Inputting Your Personal ID
You can programme your TV with a safety code, so that you can be traced if
your TV is stolen and recovered. This code can only be input once!
Make sure to write it down in this Instruction Manual.
1Press MENU. Select the symbol using $. Push to ”.
2Select Installation using $. Push to ”to enter. Select Personal ID using $.
Push to ”to enter.
3a Select the first of a total of 11 characters (letter, number, + or a blank) by
using 4or $.
bPush to ”to go to the next character.
cRepeat a and b for all characters.
4Store by pressing OK.
5Press MENU to return to the normal TV screen.
Advanced Operation
Installation
Select A-Z, 0-9 : Store: OK
Language/Country
Manual Programme Preset
Further Programme Preset
RGB Set Up
Picture Rotation
Personal ID - - - - - -
AV Preset
Select: Enter:
AV 3 Input Rear
INPUT LABEL
VIDEO
VIDEO
VIDEO
AV 1
AV 2
AV 3
AV Preset
Select Mode: Confirm: OK
AV 3 Input
INPUT LABEL
VIDEO
VIDEO
VIDEO
AV 1
AV 2
AV 3 Front
Rear

14
44
Advanced TV operation
Picture and sound are adjusted at the factory. You can however, adjust
them individually.
1Press MENU.
Select the symbol for Picture or for Sound using 4or $.
Push to ”to enter.
The menu Picture or Sound Control is displayed.
2Select the desired item using 4or $. Push to ”to enter.
3Adjust the selected item using 4, $, ”and “. Press OK to store.
Refer to the tables on this and the following page for more information.
4Repeat steps 2 and 3 to adjust other items.
5Press MENU to return to the normal TV screen.
Picture Control
Item Effect/Operation
Picture Mode $Live (for live broadcasts)
Personal (for individual settings)
4Movie (for movie broadcasts)
Contrast Less “”More
Brightness* Darker “”Brighter
Colour* Less “”More
Hue** Reddish “”Greenish
Sharpness* Softer “”Sharper
Reset Resets picture to the factory preset levels
AI 4Off: normal
(Artificial Intelligence) $On: Automatic optimization of contrast level
according to the TV signal
Noise Reduction 4Off: Normal
$On: Reduces picture noise in case of a weak
broadcasting signal
Digital Mode $Normal: 100 Hz
Digital+: 100 Hz plus line flicker reduction
4Advanced: Digital+ plus smoothing of motions
* Only if Personal is selected in Picture Mode
** Only available for NTSC colour signal (e.g. US video tapes)
Sound Control
Item Effect/Operation
Equaliser mode Select between the following sound settings
$Personal
Vocal
Jazz
Rock
Pop
4Flat (fixed setting, cannot be adjusted)
Adjusting Picture and Sound
Advanced Operation
Picture Adjustment
Select Mode: Enter:
Picture Mode
Contrast
Brightness
Color
Sharpness
Reset
AI
Noise Reduction
Digital Mode
Personal
On
On
Normal
Picture Mode
Live
Personal
Movie
Contrast
AI
On
Off
Noise Reduction
On
Off
Digital Mode
Normal
Digital+
Advanced
Audio Adjustment
Equaliser Mode
Equaliser
Adjustment
Surround Mode
SRS Mode
Auto Vol. Control
Dual Sound
Volume
Dual Sound
Personal
Mono
Off
SRS 2
SRS
Mono
Personal
Vocal
Jazz
Rock
Pop
Flat
Select Mode: Confirm: OK
45
Sound Control (continued)
Item Effect/Operation
Equaliser adjustment You can adjust the mode selected in Equaliser
mode by cutting and boosting of 5 selected
frequency bands.
Only the changes made in Personal can be stored,
the others return to factory setting.
•
Select the desired bar using ”or “, adjust using 4
and $.
Press OK to store.
Surround mode 4Off: Normal
Dolby Sur. (Pro Logic or Tru Surround **)
Select when receiving a Dolby broadcast.
After the broadcast return to off, otherwise the
TV automatically selects Dolby for any stereo
broadcast and the sound will be distorted.
SRS
Hall
Church
Disco
$Stadium
SRS-Mode* 4SRS 1
*only when SRS is selected SRS 2
in Surround mode $SRS 3
Auto Volume Control 4On: volume level of the channels will stay the same
independent of the broadcast signal
(e.g. in case of advertisements)
$Off: volume level changes according to the
broadcast signal
Dual Sound For a bilingual broadcast:
$A for channel 1
4B for channel 2
For a stereo broadcast:
$Mono
4Stereo
Headphones
2Volume Less “”More
2Dual Sound For a bilingual broadcast:
$A for channel 1
4B for channel 2
PAP
When PAP is switched on, you can additionally
select the PAP sound for the headphones
** TruSurround is a trademark of SRS Labs, Inc. SRS and the SRS symbol are
registered trademarks of SRS Labs, Inc. in the Unites States and selected foreign
countries. SRS and TruSurround are incorporated under license from SRS Labs, Inc.
and is protected under United States Patent Nos. 4,748,669 and 4,841,572 with
numerous additional issued and pending foreign patents. Purchase of this product
does not convey the right to sell recordings made with the TruSurround technology.
Advanced TV operation
Advanced Operation
Equaliser Adjustment
Sel: Adjust: Confirm:OK
Personal
+
0
–
120 150 1,5K 5 K 10 K
SRS 2
SRS Mode
Auto Vol. Control
Off
On
Dual Sound
Mono
Stereo
Volume
Dual Sound
A
B
Audio Adjustment
Personal
Mono
Off
SRS 2
SRS
Mono
Stadium
Disco
Church
Hall
SRS
Dolby Sur.
Off
Select Mode: Confirm: OK
Equaliser Mode
Equaliser
Adjustment
Surround Mode
SRS Mode
Auto Vol. Control
Dual Sound
Volume
Dual Sound

15
46
Using the Features Menu
1Press MENU. Select the symbol using $. Push zto enter.
2Select the desired menu item using $. Push zto enter.
3Select the desired setting using 4or $.
4Store by pressing OK.
5Press MENU to return to the normal TV screen.
Using Multi PIP
Multi PIP (picture in picture) mode displays a succession of 12 still pictures
and a 13th that is live. You can manually select which channel you wish to
watch, either full-screen or in the PIP mode.
1Press .
Now 13 programme positions appear on the screen, with the current channel in
the centre.
2Press PROGR +/- repeatedly to get the next or the preceding 12 programme
positions .
3Use 4, $, “and ”to move within the 13 displayed channels.
Press OK to select the framed channel.
The selected channel moves to the centre.
4When the centre channel is framed, press OK to get the channel full screen or
press to return to the normal TV mode.
Advanced Operation
Advanced TV operation
Features
Item Effect/Operation
Auto Format* 4On: Automatic selection of the screen format
*only for aerial signal $Off: Normal mode
Format Correction* 4On: Smart mode is selected automatically for 4:3/
*only if Auto Format is on 14:9 broadcasts
$Off: 4:3/14:9 is selected
Sleep Timer You can select a time period after which the TV
switches itself into standby mode
4Off
10 min.
20 min.
.
.
.
$90 min.
Parental Lock $Off: Normal mode
4On: TV can only be switched on out of
standby-mode using the Remote Commander,
the buttons on the TV do not work.
AV2 Source You can select the source to be output from the
Scart connector
Y 2/ j 2. In this way you can
record from this socket while watching another
source.
4TV audio/video signal from the aerial ˘
AV1 audio/video signal from Scart 1
AV2 audio/video signal from Scart 2
$AV3 audio/video signal from front or rear connectors
Features
Auto Format
Format Correction
Sleep Timer
Parental Lock
AV 2 Source
On
On
Off
Off
TV
Select: Enter:
Auto Format
Off
On
Format Correction
Off
On
10 min
Sleep Timer
Parental Look
Off
On
AV 2 Source
AV 3
AV 2
AV 1
TV
03 05
01 06
11 09 08
02
10
07
13
12
04
47
Using Screen Mode
When Auto Format in the Features menu is preset to »On« and a format signal
is being transmitted, the TV set automatically selects the detected screen format.
Screen mode, however, lets you select the screen format of your choice.
•
Press 9repeatedly to get one of the following formats:
Smart imitation of wide screen effect for 4:3 broadcasts, parts of the top and
bottom of the picture are cut off
4:3 conventional 4:3 aspect ratio, full picture information
14:9 compromise between 4:3 and 16:9 aspect ratios
Zoom imitation of wide screen effect for letterboxed movies
Wide for 16:9 broadcasts
In Zoom and 14:9 modes parts of the top and the bottom of the screen are cut
off. Using 4and $you can adjust the position of the image onscreen to e.g.
read subtitles. Press OK to confirm.
Advanced TV operation
Advanced Operation
Operating PAP (Picture and Picture)
PAP divides the screen into two for watching two channels simultaneously
(with a video source on one if you want).
The sound of the left screen is on the TV loudspeakers, the sound of the right
screen is selectable via headphones.
Switching PAP on and off
•
Press
´/´
6once to display the screens in format 4:3 and twice to switch
PAP off.
Selecting a PAP source
1Press >5.
The symbol >appears in the right screen.
2Select the desired source using the number buttons (for a TV channel) 7or
…3(for a video source).
Swapping screens
•
Press
Å/a
4to swap the two screens.
Zooming the screens
•
Using the joystick buttons “and ”you can change the size of the two screens.
When you press ”repeatedly the right screen gets bigger, while the left screen
gets smaller.
Smart
Zoom
Wide

16
50
Teletext
Most TV channels broadcast information via teletext. The index page of the teletext
service (usually page 100) gives you information on how to use the service.
Make sure to use a TV channel with a strong signal, otherwise there may be
Teletext errors.
Direct Access Functions
Switching Teletext on and off
1Select the TV channel which carries the teletext service you want to view.
2a Press f@º once for Picture and Teletext (P&T).
The screen is divided in two, with the TV channel in the right corner and the
Teletext display on the left.
P&T mode: Press
Å/a
4. Press PROGR +/- !£ to change the channel of the
TV screen. Push “or ”to change the size of the TV screen.
Press
Å/a
4again to resume normal teletext reception.
bPress ftwice to get Teletext only.
cPress fthree times for Mix mode.
The TV broadcast and the Teletext display are overlapped.
3Press
; @¡ or press fa fourth time to switch teletext off.
Selecting a Teletext Page
Direct Page Selection
•
Input the three digits of the page number using the number buttons 7.
If you have made a mistake:
Type in any three digits, then re-enter the correct page number.
Page Catching
1Select a teletext page which has several page numbers on it (e.g., the index
page).
2Press OK !¡.
Page Catching is displayed.
3Select the desired page number using 4or $!¡ and press OK.
The requested page is displayed after some seconds.
Selecting the next or the preceding page
•
Press !£ (Page +) or (Page -).
Selecting the index page
•
Press
+
;
2.
Selecting a subpage
A teletext page may consist of several subpages. In this case an information line
is displayed, showing the number of subpages.
•
Select the mode by pushing 4. Select the subpage by using 4or $.
Freezing a Teletext subpage
1Press !• or R3
The symbol Ris displayed and the subpage is not updated.
2Press f@º to resume normal teletext reception.
Using Fastext*
*depending on availability of service
Fastext lets you access pages with one button stroke. When Fastext is broadcast,
a colour-coded menu appears at the bottom of the screen. The colours of this
menu correspond to the red, green, yellow and blue buttons 9, !º, !∞, !§ on
the Remote Control.
•
Press the coloured button which corresponds to the colour in the
colour-coded menu.
Advanced Operation
01
100
Teletext TV
216-02
01 03 04 05 06 07 0802
51
Using the Teletext Menu
This TV set has a menu-guided teletext system. When teletext is switched on
you can use the joystick buttons to operate the teletext menu.
Select the menu functions as follows:
1Press MENU !™.
The Teletext menu is superimposed onto the teletext display.
2Select the teletext function using 4or $!¡. Push ”to enter.
Top/Bottom/Full
For convenient reading of a Teletext page you can enlarge it.
After having selected the function, a sub menu Top 4Bottom $Full OK is
displayed.
•
Push 4to enlarge the upper half of the screen, push $to enlarge the lower
half. Press OK to resume the normal size.
Press fto resume the normal Teletext operation.
Text Clear
After having selected the function, you can watch a TV channel while waiting
for a requested Teletext page. As soon as the page is available, the symbol f
changes colour.
•
Press fto view the page.
Reveal
Some teletext pages contain hidden information (e.g., for a quiz), which you can
reveal.
After having selected the function, the hidden information appears.
•
Press fto resume the normal Teletext operation.
Time Page*
*depending on availability of service
You can call up a time-coded page - such as an alarm page - at a time specified
by you.
After having selected the function a sub menu is displayed.
1Select On using 4or $. Push ”to enter.
2Enter the three digits of the desired page using the number buttons 7.
3Enter the four digits of the desired time using the number buttons 7.
4Press OK to store.
The time is displayed in the top left-handed corner of the screen.
At the requested time the page is displayed.
Teletext
Advanced Operation
Teletext
Top / Bottom / Full
Text Clear
Reveal
Time Page
Select: Enter Menu:
Top: Bottom: Full: OK
Time Page
PAGE TIME
Select: Enter:
– – – - - : - -

17
2-1. REAR COVER REMOVAL
2-3. SERVICE POSITION
2-2. CHASSIS ASSY REMOVAL
1
6 Screws
BTV 4x16
2 Rear Cover
2-4. U BOARD REMOVAL
2 Pull the Board in
the direction of the
arrow and remove.
SECTION 2
DISASSEMBLY
CAUTION:
Take care not to damage the C Board when removing
or refitting the rear cover.
1 Push the
claw in the
direction of the
arrow and
remove.

18
2-5. J BOARD REMOVAL
2-7. B1 BOARD REMOVAL
2-6. J SHIELD REMOVAL
1 Push the claw in
the direction of the
arrow and remove.
2 Pull the Board in
the direction of the
arrow and remove.
1 Push the claw in
the direction of the
arrow and remove.
2 Push the
claw in the
direction of
the arrow
and remove.
3 Remove the shield in
the direction of the arrow.
All other boards are removed in a
similar manner to those shown
NOTE

19
Anode button
a
* REMOVING PROCEDURES.
Turn up one side of the rubber cap in
the direction indicated by the arrow a
12 Using a thumb pull up the rubber cap
firmly in the direction indicated by the
arrow b
3 When one side of the rubber cap is
separated from the anode button, the
anode-cap can be removed by turning
up the rubber cap and pulling it up in
the direction of the arrow c
bb
c
Note : Short circuit the anode of the picture tube and the anode cap to the metal chassis, CRT shield or carbon paint on the CRT, after removing the anode.
• REMOVAL OF ANODE-CAP
• HOW TO HANDLE THE ANODE-CAP
1 To prevent damaging the surface of the anode-cap do not use sharp materials.
2 Do not apply too great a pressure on the rubber, as this may cause damage to
the anode connector.
3 A metal fitting called a shatter hook terminal is fitted inside the rubber cap.
Do not turn the rubber foot over excessively this may cause damage if the
shatter hook sticks out.
Cushion
7 DGC holder
Picturetube 11
C board 3
Spring tension 9
Degaussing coils 8
Anode cap 1
Neck assy 5
VM board 4
Deflection yolk 6
2 Chassis assy
10 Four PT screws
2-8. PICTURE TUBE REMOVAL

20
REMOVAL AND REPLACEMENT OF THE MAIN-BRACKET
BOTTOM PLATES.
(1) REMOVING THE PLATES
In the event of servicing being required to the solder side of the D Board printed
wiring board, the bottom plates fitted to the main chassis bracket require to be
removed.
This is performed by cutting the gates with a sharp wire cutter at the locations
indicated by arrows.
Note :There are 4 plates fitted to the main bracket and secured by 4 gates.
Only remove the necessary plate to gain access to the printed wiring board.
(2) REFITTING THE PLATES
Because the plates differ in size it is important that the correct plates are refitted in
their original location.
Please note that the plates need to be rotated 180 degrees from the cut position to
allow the tabs to be fitted in the catch positions.
£For safety reasons, on no account should the plates be
removed and not refitted after servicing.
Tab
Catch