Sorelle 325 Katherine Crib W User manual

Made in SC, China
Important Information:
Assembly Instruction
Read all instructions
By Sorelle - A Division of C & T International, Inc.
46 Whelan Road, East Rutherford, N.J.07073 U.S.A.
Tel, [phone] Fax, [phone]
BEFORE assembling crib.
KEEP INSTRUTIONS FOR FUTURE USE.
Katherine Crib W/ Toddler Rail
Website: www.sorellefurniture.com

Page 2
325 Katherine Crib W/ Toddler Rail Instruction Sheet
Sorelle
WARNING:
*Infants can suffocate on soft bedding. Never add a pillow or comforter. Never place additional padding
under an infant.
*Failure to follow these warnings and the assembly instructions could result in serious injury or death.
DO NOT use this crib if you cannot exactly follow the accompanying instructions.
*To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to
sleep, unless otherwise advised by your physician.
*Strangulation Hazard: STRINGS CAN CAUSE STRANGULATION! Do not place items with a string
around a child's neck, such as hood strings or pacifier cords. Do not suspend strings over a crib or
attach strings to toys.
*Strangulation Hazard: To help prevent strangulation tighten all fasteners. A child can trap parts of
the body or clothing on loose fasteners.
*Strangulation Hazard: Do not place crib near window or patio door where cords from blinds or
drapes may strangle a child.
*Fall Hazard: When child is able to pull to a standing position, set mattress to lowest position and
remove bumper pads, large toys and other objects that could serve as steps for climbing out. This crib
has an adjustable mattress support. For the convenience of the parent when the baby is very small, the
mattress support may be used in the highest position.
*Fall Hazard: Stop using crib when child begins to climb out or reaches a height of 35in. (89cm),
whichever occurs first. The child should be placed in a youth or regular bed.
*Check this product for damaged hardware, loose joints, loose bolts or other fasteners, missing parts,
or sharp edges before and after assembly and frequently during use. Securely tighten loose bolts and
other fasteners. Do not use crib if any parts are missing, damaged or broken. Contact C&T
International Inc. for replacement parts and instructional literature if needed. Do not substitute parts.
*Follow warnings on all products in a crib.
*If refinishing, use a non-toxic finish specified for children's products.
*Never use plastic shipping bags or other plastic film as mattress covers because they can cause
suffocation.
*Infants can suffocate in gaps between crib sides and a mattress that is too small.
*Ensure a safe environment for the child by checking regularly, before placing the child in the crib, that
every component is properly and securely in place.
*To avoid head injury, do not allow any child to play underneath the crib.
C
Crib Warnings
AUTION : ANYMATTRESSUSEDINTHISCRIBMUST
BEATLEAST271/4”(69CM)x515/8”(131 CM) WITH
ATHICKNESSNOTEXCEEDING6”(15CM).

325 Katherine Crib W/ Toddler Rail Instruction Sheet
Page 3
Sorelle
C
Toddler Bed Warnings
AU RIBMUST
BEA CM) WITH
ATHI
WARNING
INFANTS HAVE DIED IN TODDLER BEDS FROM ENTRAPMENT.
Openings in and between bed parts can entrap head and neck of a small child.
NEVER use bed with children younger than 15 months.
ALWAYS follow assembly instructions.
The maximum user weight is 50lbs (22.7kg)
WARNING
STRANGULATION HAZARD
NEVER place bed near windows where cords from blinds or drapes may strangle a child.
NEVER suspend strings over a bed.
NEVER place items with a string, cord, or ribbon, such as hood strings or pacifier cords,
around a child's neck. These items may catch on bed parts.
CAUTION
ENTRAPMENT HAZARD
To avoid dangerous gaps, any mattress used in this bed shall be a full-size crib mattress
at least 51 5/8 in (1310mm) in length, 27 1/4 in (690mm) in width and 4 in (100mm) in
thickness. The mattress thickness must not exceed 6 in (150mm).
NOTES ON ASSEMBLY:
-During the assembly process whenever using screws or bolts, check each by placing the screw/bolt on
the diagram of the item which is drawn actual size and design. Be sure to use the proper size and shape
specified in the instructions.
-To assemble this unit you may be required to place the unit on it’s side and face. It is strongly
recommended that assembly is done on a soft, non-abrasive surface to avoid damaging the finish.
NOTES ON CARE AND MAINTENANCE:
- Do not scratch or chip the finish.
- Inspect the product periodically, contact C&T International Inc. for replacement parts or questions.
- Do not store the product or any parts in extreme temperatures and conditions such as a hot attic or a
damp, cold basement. These extremes can cause a loss of structural integrity.
-To preserve the luster of the high quality finish on your product, it is recommended to place a doily or
felt pad under any items you place on the finish.
-Clean with a damp cloth, then a dry cloth to preserve the original luster and beauty of this fine finish.
-Do not use abrasive chemicals.
-Do not spray cleaners directly onto furniture.
-Lift slightly when moving on carpeting to prevent leg breakage.
-Use of a vaporizer near furniture will cause wood to swell and finish to peel.
NOTES ON USE:
Keep children and others safe by following these simple rules:
- Do not allow any child to play on furniture
- Do not allow climbing on any piece of furniture.
- Do not allow hanging from any piece of furniture.
- Always monitor your child’s activity when in the nursery.

325 Katherine Crib W/ Toddler Rail Instruction Sheet
Page 4
Sorelle
(DRF)Right Front Corner Post (1 pc)
(DLF)Left Front Corner Post (1 pc)
(B) Foot Board (1 pcs)(A) Head Board (1 pc) (A1) Top Rail of head board (1 pc)
(B1) Top Rail of foot board (1 pc) (C) Side Frame (2 pcs)
(F) Mattress Support (1 pc)
(e) M6 x 17mm Allen bolt (4 pcs)
(ERB)Right Back Corner Post (1 pc)
(ELB)Left Back Corner Post (1 pc)
Crib Assembly Parts
(h) Allen Key (1 pcs)
(c) M6 x 45mm Allen bolt (6 pcs) (d) M6 x 38mm Allen bolt (4 pcs)
(a) M6 x 76mm Allen bolt (12 pcs) (b) M6 x 55mm Allen bolt (4 pcs)
(f ) Dowel Pin ( 2pcs ) (g).Barrel fittings (14pcs)
(G) Guardrail (2pcs)
(H) Stabilizer Bar (1 pc)

325 Katherine Crib W/ Toddler Rail Instruction Sheet
Page 5
Sorelle
Step 2
Step 1
Figure 1 Figure 1a
Figure 2
Crib Assembly Steps
Connect Sideframes to Corner posts as Figure 1&1a shows.
C
C
ELB
DLF
A
A1
DRB
ERF
FootBoard (A&A1) Assembled as Figure 2 shows.
b
b
b
b
a
a
a
a
a
a
d
d
d
d
g
g
g
g
g
g
g
g
g
g

325 Katherine Crib W/ Toddler Rail Instruction Sheet
B
B
Page 6
Sorelle
Step 3
Step 4
CA
BE
AT
Crib Assembly Steps
F
FD
NOTE:This crib has a high position setup for use during your baby's first months.
As soon as your baby starts to sit up,you must use the lowest mattress level.
Your crib is now ready to use.
FootBoard(B) Assembled as Figure 4 shows.
Install the Metal Support (F) to the crib as Figure 3 shows.
B1
B1
g
h
h
f
a
g

325 Katherine Crib W/ Toddler Rail Instruction Sheet
Step 1
Parts and Hardwares
(G) Guardrail (2 pcs) (H) Stabilizer Bar (1 pc)
(a) M6 x 55mm Allen bolt (4 pcs) (c) M6 x 45mm Allen bolt (6 pcs)
Page 7
Sorelle
CA
BE
AT
Toddler Bed Conversion (Optional)
Move out the Footboard (B&B1) by loosing Allen Bolts.
Install the Guardrail and Stabilizer Bar to the Crib as figure.
(h) Allen Key (1 pcs)
WARNING:
TODDLER BED WARNINGS
SEE PAGE 3 FOR
The mattress support must be in the lowest positions.
Store all hardware safely.
Read all warnings on page 3.
h
c
c

325 Katherine Crib W/ Toddler Rail Instruction Sheet
Step 2
Move out the Footboard (B) from crib by loosing Allen Bolts (a).
Install the Stabilizer Bar to the Crib as figure.
NOTE:The Day bed or Love seat sofa not for adults
The mattress support must be in the lowest positions.
Store all hardware safely.
Stabilizer bar must be used when converted
to a Day bed or Love seat sofa.
Page 8
Sorelle
C
BE
AT
Day Bed or Love seat sofa Conversion (Optional)

325 Katherine Crib W/ Toddler Rail Instruction Sheet
Additional Parts and Hardwares
(e) Allen Key (1 pcs)
(A) 215# Bed Rail (2 pcs) (B) 215# Mattress Support Bar (4 pcs)
(a) M6 x 55mm Allen bolt ( 8 pcs)
( 215# Adult Rail System Not included, sold separately)
Page 9
Sorelle
Fullsize Bed Conversion (Optional)
(C) 215# Adaptor (4pcs)
(b) Ø4 X 30mm Phillips Screw (16 pcs)
Tool required
Follow all instructions supplied with the 215# Adult Rail System. NOTE: 215# Adult Rail System
is not included. Please see your crib retailer, visit WWW.Sorellefurniture.com or contact C&T
International Inc. for more information.