SOtM sMS-1000 User manual

Ultimate High Performance Audio
www.sotm-audio.com
sMS-1000 Operating Instructions
Rev 1.0

Page 2
Precautions
Please read this instruction carefully before usage.
Do not attempt to disassemble or modify the device.
Keep the device away from external shock or vibration.
Do not use damaged or peeled cable.
Do not use outside.
Use the adaptor that is supplied with product.
Connect power cable only after the device is connected to all other devices.
other devices.
change or remove without notice.

Page 3
Contents

Waranty information
Warranty service information
from the date of purchasing
Warranty service at a cost
Product that free warranty service period is expired.
Malfunction caused by incident.
In case of attempt to disassemble or modify the device
In case of not follow instructions on this manual.
warranty service.
SOtM is not responsible for any loss of the data in the internal or external storage
device that is used with product.

1. sMS-1000
2. DC adaptor
3. Power cable

1. Power input
3. Earth terminal
Connect to USB device.
Connect to USB device.
Connect to USB device.
Connect to network router.
POWER INPUT
USB PORT 1 USB PORT 2
POWER
PORT 1
ON
OFF
DC INPUT
VGA
DVI
USB USB
LAN
LINE
N.C 9
78
1. Standby button
Indicate power status and storage device operation status.

POWER INPUT
USB PORT 1 USB PORT 2
POWER
PORT 1
ON
OFF
AES/EBU OPTICAL COAXIAL
DC INPUT
VGA
DVI
USB USB
LAN
LINE
RIGHT LEFT RIGHT LEFT
POWER INPUT
USB PORT 1 USB PORT 2
POWER
PORT 1
ON
OFF
DC INPUT
VGA
DVI
USB USB
LAN
LINE
2. Optical digital output
3. Coaxial digital output
1. Right balance analog output
3. Right unbalanced analog output
Rear Panels
Caution
Do not use more than two USB port at the
same time.
Do not use USB keyboard and USB
mouse.

Using sMS-1000
-
nected to PC or smart phone.

-
nected to same network with sMS-1000.

Start up
Preparation before power supply.
1.
2.
Connect all necessary signal cables before connect power cable
3.
standby switch on the front panel to supply power.
1.
Run web browser program.
2.
Page 10

Page 11
LMS
(Logitech Media Server)
CD and DVD
auto ripper
FLAC Mirror
Main Menu
System
Informatioin
System
Configuration
Network
Configuration
USB Backup
DLNA Server
DAAP(iTunes)
Server
Configure
Vortexbox Player
Upgrade Status

the problem.
1.
2.
3.
Please wait 1 to 3 minutes for normal operation after power on.
Page 12

Page 13
1.
Restart auto ripper function.
2.
Show full ripping record.
Clear log3.
Delete ripping record.
Rip any track longer than ___ seconds.
Rip track longer than setting time.
Mirror tracks to m2ts
Submit
1234
5
6
7
8

Start mp3 mirroring1.
2.
Stop mirroring3.
Stop automatic mirroring.
Show automatic mirroring record.
Clear log
Delete mirroring record.
Delete all mp3
Enable automatic mp3 mirroring
Enable mp3 embedded cover art
10.
mirroring
Submit11.
Save revised setting and use.
1234
6
7
8
9
5
11
10

System Information
You can check various system information.

Change network connection setting of
sMS-1000.
Caution
strongly recommended.
System name1.
SMB workgroup name2.
Workgroup name to use on Samba server.
IP address assignment3.
Choose the way to assign IP address.
-
Static IP information
-
ignored.
Enable Sonos share
Set to use share function of Sonos device.
Submit
music server restarts automatically.
1
2
3
5
6
7
4

Check the operating status of sMS-1000
and change.
Reboot1.
Restart sMS-1000.
Power down2.
Correct System Time3.
Calibrate system time of sMS-1000.
Choose display temperature unit
Submit
Save changed setting and use.
Service Manager
Check the operating status of sMS-1000 service function
and stop or start each function.
123
4
5
6
7

USB Backup
displayed.
1.
Show USB backup record.
Clear log2.
Delete backup record.
Backup to USB3.
Restore from USB
123456

1.
Clear log2.
Delete operating record.
Rescan3.
Rescan media data.
Reset to defaults
Pictures
Submit
1234
5
6
7
8
9
10

Page 20
Set the audio output device of sMS-1000.
Improper setting output no sound so it
requires attention.
1.
2.
-
3.
Set to use software volume control function.
Submit
Save changed setting and use. Some service function
may restart.
Show audio device available to be used.
1 2 3
5
6
4
7