SOtM sCLK-OCX10 User manual

sCLK-OCX10 Operating instructions Rev1.0
Precaution
Please read this instruction carefully before use.
Do not attempt to disassemble or modify the product.
Keep the product away from the external shocks or vibrations.
Do not use the damaged or peeled cables.
Do not use the product outdoors.
Product specifications and features are subject to change without notice.
Warranty Information
Free warranty service
In case of the defect is found caused by the design or the production flaw while using the device properly, a manufacturer is
responsible for the faulty product and the free warranty service for 1 year from the date of purchasing.
Even in the warranty service period, malfunction or damage of products caused by the inevitable incident such as a natural
disaster is not subject of the free warranty service.
Warranty service at a cost
The product that free warranty service period is expired.
Malfunction of the product caused by a user’s fault.
Malfunction of the product caused by incidents.
Malfunction of the product caused by a natural disaster such as earthquake, flood, lightning & etc.
In case of the warranty service at a cost, a customer should cover the transportation costs.
Examples about a user’s fault
In case of attempts to disassemble or modify the device.
In case of not following the instructions on this manual.
Please read this operating instructions and Q&A board on our website carefully before asking for the warranty service.
Supplied components
sCLK-OCX10 unit
Operating instruction
Specification
User interface
Operating indicator LED x1
Output clock signal
Frequency : 10.000MHz sine wave
Output level : 13dBm(2.825Vp-p@50Ω), ±2dBm
All isolated clock output
Output connector
50Ω BNC connector x 4
Optional 75Ω BNC connector available
Typical Phase noise(dB/Hz) of internal OSC
10Hz : -140 >
100Hz : -160 >
1KHz : -165 >
10KHz : -165 >
100KHz : -165 >
Temperature stability(0 to +50℃, Ref : 25℃,)
±2E-9
DC power input
Input voltage : 12Vdc
Voltage tolerance: -0.05Vdc, +0.5Vdc
Input current : 2A max
5.5mm OD, 2.1mm ID adaptor jack
Operating environment
Operating temperature : +10 ~ +30℃
Storage temperature : 0 ~ +40℃
Operating & storage humidity : 10% ~ 90%
Dimension
106 x 48 x 245(mm)
Weight
1.5Kg >
Ultimate High Performance Audio
www.sotm-audio.com

①
③
⑤
②
④
⑥
10MHz input connector
10MHz input connector
BNC cable
BNC cable
Product outline
①Power indicating LED lamp
②DC Power input jack : 12V power is required. ( jack size : 5.5mm OD, 2.1mm ID).
③10MHz output connector 1 : Connect 10MHz clock signal to a device by a 50Ω or 75ΩBNC cable.
④10MHz output connector 2 : Connect 10MHz clock signal to a device by a 50Ω or 75ΩBNC cable.
⑤10MHz output connector 3 : Connect 10MHz clock signal to a device by a 50Ω or 75ΩBNC cable..
⑥10MHz output connector 4 : Connect 10MHz clock signal to a device by a 50Ω or 75ΩBNC cable..
Cf. : The white color of 10MHz output connector means 75Ω, and the black color means 50Ωconnector.
Precautions
When connecting BNC cables, power off the devices which will be connected and sCLK-OCX10
Product user guide
Power off all devices which will be connected and sCLK-OCX10 to make 10Mhz clock signal connection by BNC cables.
Check the power supply for the sCLK-OCX10 is 12V, and connect the correct power supply to the DC Power input jack of sCLK-OCX10.
Power on the power supply and then the power indicating LED lamp of sCLK-OCX10 will be on and start operating.
Power on all connected devices to use sCLK-OCX10.