Philips EMOTIVE Micro MZ-1000 User manual

GB
CLASS 1
LASER PRODUCT
COMPACT
DIGITAL AUDIO
Service Manual
Service
Service
Service
Service
Service
MZ-1000/22 & MZ-1100/22
TABLE OF CONTENTS
Page
Location of pc boards & Version variations ................1-2
Technical Specifications .............................................1-3
Measurement setup ....................................................1-4
Service Aids, Safety Instruction, etc...........................1-5
Disassembly Instructions & Service positions .............. 2
Service Test Program .................................................3-1
Set Block Diagram ......................................................4-1
Set Wiring Diagram ....................................................5-1
Control Board................................................................. 6
ECO6 Tuner Board: System Non-Cenelec ................ 7A
System Cenelec........................ 7B
Combi Board .................................................................. 8
Module Power Box ........................................................ 9
Slot Loader Module (MP3 version).............................. 10
Set Mechanical Exploded view & parts list ................. 11
©Copyright 2002 Philips Consumer Electronics B.V. Eindhoven, The Netherlands
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or
transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise
without the prior permission of Philips.
Published by BB 0230 Service Audio Printed in The Netherlands Subject to modification
Lifestyle Micro System
3139 785 30077
Version 1.0
& MZ-1200/22
MZ-1000
MZ-1200
MZ-1100

SUPPLY BOARD
AMPLIFIER BOARD
INTERCONNECT
BOARD
( POWER BOX )
CD SLOT
LOADER BOARD
COMBI BOARD
TUNER BOARD
IR
BOARD
CONTROL
BOARD
( SPEAKER BOX )
( SPEAKER BOX )
( CENTRE UNIT )
1-2
LOCATION OF PRINTED CIRCUIT BOARDS
/21 /22 /37 /21 /22 /37 /21 /22 /37
/21M /21M /21M
Aux in /CDR in xxxxxxxxx
Line Out xxxxxxxxx
Surround Out
Subwoofer Out
Digital Out
Matrix Surround
CD Text
Dolby B
Dolby Pro Logic (DPL)
Incredible Surround xxxxxxxxx
Karaoke Features
ECO Power Standby (Clock Display Off) xxxxxxxxx
ECO6 Tuner Board - Systems Non-Cenelec x x x x x x
ECO6 Tuner Board - Systems Cenelec x x x
VERSION VARIATIONS:
Type /Versions: MZ-1000 MZ-1100 MZ-1200
Features &
Board in used:

1-3
SPECIFICATIONS
GENERAL:
Mains voltage : 110-127V/220-240V for /21/21M
120V for /37
220-230V for /22
Mains frequency : 50/60Hz
Power consumption : < 1W at ECO Power Standby
: <10W at Standby (DEMO mode off)
: 33W at Active
Clock accuracy : < 4 seconds per day
TUNER:
FM
Tuning range : 87.5-108MHz
Grid : 50kHz
100kHz for /37
IF frequency : 10.7MHz ±25kHz
Aerial input : 75Ωcoaxial
Sensitivity at 26dB S/N : < 7µV
Selectivity at 600kHz bandwidth : > 25dB
Image rejection : > 25dB
Distortion at RF=1mV, dev. 75kHz : < 3%
-3dB Limiting point : < 8µV
Crosstalk at RF=1mV, dev. 40kHz : > 18dB
MW
Tuning range : 531-1602kHz
530-1700kHzfor/21/21M/37
Grid : 9kHz
10kHz for /21/21M/37
IF frequency : 450kHz ±1kHz
Aerial input : Frame aerial
Sensitivity at 26dB S/N : < 4.0mV/M
Selectivity at 18kHz bandwidth : > 18dB
IF rejection : > 45dB
Image rejection : > 28dB
Distortion at RF=50mV, m=80% : < 5%
AMPLIFIER:
Output power (8Ω, 1kHz, 10% THD)
L & R : 2 x 25W RMS
Frequency response within -3dB : 50Hz-16kHz
Incredible Surround : ON/OFF
Treble : 12.5kHz ±3 Steps
Bass : 55Hz ±3 Steps
Input sensitivity
Aux in (at 1kHz) : 500mV ±3dB at 600Ω
CDR in (at 1kHz) : 1V ±3dB at 600Ω
Output sensitivity
Line out (Left/Right) : 450mV ±1dB at 22kΩ
Headphone output at 32Ω: 680mV ±1dB (Vol. Max.)
COMPACT DISC:
Measurement done directly at the connector on the board.
Output resistance : 100Ω
Output voltage (Unloaded, 1kHz) : 550mV
Channel unbalance : ±1dB
Frequency response : 20Hz-20kHz
Signal to Noise Ratio (A-weighted) : > 80dBA
Distortion : < 0.003%
Channel separation (1kHz) : >60dB
MP3-CD bit rate : 32-256 kbps
Sampling frequencies : 32kHz, 44.1kHz, 48kHz

1-4
LF Generator
e.g. PM5110
Recorder
Use Universal Test Cassette CrO2 SBC419 4822 397 30069
LEVEL METER
e.g. Sennheiser UPM550
with FF-filter
S/N and distortion meter
e.g. Sound Technology ST1700B
L
R
DUT
or Universal Test Cassette Fe SBC420 4822 397 30071
LEVEL METER
e.g. Sennheiser UPM550
with FF-filter
S/N and distortion meter
e.g. Sound Technology ST1700B
L
R
DUT
CD
Use Audio Signal Disc
(replaces test disc 3)
SBC429 4822 397 30184
Bandpass
250Hz-15kHz
e.g. 7122 707 48001
LF Voltmeter
e.g. PM2534
DUT
S/N and distortion meter
e.g. Sound Technology ST1700B
Frame aerial
e.g. 7122 707 89001
Tuner AM (MW,LW)
To avoid atmospheric interference all AM-measurements have to be carried out in a Faraday´s cage.
Use a bandpass filter (or at least a high pass filter with 250Hz) to eliminate hum (50Hz, 100Hz).
RF Generator
e.g. PM5326
Ri=50Ω
Bandpass
250Hz-15kHz
e.g. 7122 707 48001
LF Voltmeter
e.g. PM2534
DUT
RF Generator
e.g. PM5326
S/N and distortion meter
e.g. Sound Technology ST1700B
Use a bandpass filter to eliminate hum (50Hz, 100Hz) and disturbance from the pilottone (19kHz, 38kHz).
Ri=50Ω
Tuner FM
MEASUREMENT SETUP

SERVICE AIDS
Service Tools:
Universal Torx driver holder .................................. 4822 395 91019
Torx bit T10 150mm ............................................. 4822 395 50456
Torx driver set T6 - T20 ......................................... 4822 395 50145
Torx driver T10 extended ...................................... 4822 395 50423
Cassette:
SBC419 Test cassette CrO2 ................................. 4822 397 30069
SBC420 Test cassette Fe ..................................... 4822 397 30071
MTT150 Dolby level 200nWb/M ............................ 4822 397 30271
Compact Disc:
SBC426/426A Test disc 5 + 5A ............................ 4822 397 30096
SBC442 Audio Burn-in Test disc 1kHz ................. 4822 397 30155
SBC429 Audio Signals disc .................................. 4822 397 30184
Dolby Pro-logic Test Disc ...................................... 4822 395 10216
ESD Equipment:
Anti-static table mat - large 1200x650x1.25mm ... 4822 466 10953
Anti-static table mat - small 600x650x1.25mm ..... 4822 466 10958
Anti-static wristband .............................................. 4822 395 10223
Connector box (1MΩ) ............................................ 4822 320 11307
Extension cable
(to connect wristband to conn. box) .................. 4822 320 11305
Connecting cable
(to connect table mat to conn. box) .................. 4822 320 11306
Earth cable (to connect product to mat or box) .... 4822 320 11308
Complete kit ESD3
(combining all above products) ......................... 4822 320 10671
Wristband tester .................................................... 4822 344 13999
1-5
HANDLING CHIP COMPONENTS

GB
WARNING
All ICs and many other semi-conductors are
susceptible to electrostatic discharges (ESD).
Careless handling during repair can reduce life
drastically.
When repairing, make sure that you are
connected with the same potential as the mass
of the set via a wrist wrap with resistance.
Keep components and tools also at this
potential.
F
ATTENTION
Tous les IC et beaucoup d’autres
semi-conducteurs sont sensibles aux
décharges statiques (ESD).
Leur longévité pourrait être considérablement
écourtée par le fait qu’aucune précaution n’est
prise à leur manipulation.
Lors de réparations, s’assurer de bien être relié
au même potentiel que la masse de l’appareil et
enfiler le bracelet serti d’une résistance de
sécurité.
Veiller à ce que les composants ainsi que les
outils que l’on utilise soient également à ce
potentiel.
ESD
D
WARNUNG
Alle ICs und viele andere Halbleiter sind
empfindlich gegenüber elektrostatischen
Entladungen (ESD).
Unsorgfältige Behandlung im Reparaturfall kan
die Lebensdauer drastisch reduzieren.
Veranlassen Sie, dass Sie im Reparaturfall über
ein Pulsarmband mit Widerstand verbunden
sind mit dem gleichen Potential wie die Masse
des Gerätes.
Bauteile und Hilfsmittel auch auf dieses gleiche
Potential halten.
NL
WAARSCHUWING
Alle IC’s en vele andere halfgeleiders zijn
gevoelig voor electrostatische ontladingen
(ESD).
Onzorgvuldig behandelen tijdens reparatie kan
de levensduur drastisch doen verminderen.
Zorg ervoor dat u tijdens reparatie via een
polsband met weerstand verbonden bent met
hetzelfde potentiaal als de massa van het
apparaat.
Houd componenten en hulpmiddelen ook op
ditzelfde potentiaal.
I
AVVERTIMENTO
Tutti IC e parecchi semi-conduttori sono
sensibili alle scariche statiche (ESD).
La loro longevità potrebbe essere fortemente
ridatta in caso di non osservazione della più
grande cauzione alla loro manipolazione.
Durante le riparazioni occorre quindi essere
collegato allo stesso potenziale che quello della
massa dell’apparecchio tramite un braccialetto
a resistenza.
Assicurarsi che i componenti e anche gli utensili
con quali si lavora siano anche a questo
potenziale.
“Pour votre sécurité, ces documents
doivent être utilisés par des spécia-
listes agréés, seuls habilités à réparer
votre appareil en panne”.
GB
Safety regulations require that the set be restored to its original
condition and that parts which are identical with those specified,
be used.
NL
Veiligheidsbepalingen vereisen, dat het apparaat bij reparatie in
zijn oorspronkelijke toestand wordt teruggebracht en dat onderdelen,
identiek aan de gespecificeerde, worden toegepast.
F
Les normes de sécurité exigent que l’appareil soit remis à l’état
d’origine et que soient utiliséés les piéces de rechange identiques
à celles spécifiées.
D
Bei jeder Reparatur sind die geltenden Sicherheitsvorschriften zu
beachten. Der Original zustand des Geräts darf nicht verändert werden;
für Reparaturen sind Original-Ersatzteile zu verwenden.
I
Le norme di sicurezza esigono che l’apparecchio venga rimesso
nelle condizioni originali e che siano utilizzati i pezzi di ricambio
identici a quelli specificati.
"After servicing and before returning set to customer perform a
leakage current measurement test from all exposed metal parts to
earth ground to assure no shock hazard exist. The leakage current
must not exceed 0.5mA."
CLASS 1
LASER PRODUCT
3122 110 03420
GB
Warning !
Invisible laser radiation when open.
Avoid direct exposure to beam.
S
Varning !
Osynlig laserstrålning när apparaten är öppnad och spärren
är urkopplad. Betrakta ej strålen.
SF
Varoitus !
Avatussa laitteessa ja suojalukituksen ohitettaessa olet alttiina
näkymättömälle laserisäteilylle. Älä katso säteeseen!
DK Advarse !
Usynlig laserstråling ved åbning når sikkerhedsafbrydere er
ude af funktion. Undgå udsaettelse for stråling.
1-6

DISMANTLING INSTRUCTIONS (CENTRE UNIT)
Dismantling of the Cladding
1) Remove 8 Plug Rubbers (pos 123, 124, 125) from both
side of the Centre Unit (for MZ-1100 only) with a flat head
screw driver (see Figure 1).
Figure 1
Dismantling of the Cover Orn Rear and Cladding Internal
1) Remove 5 screws D and 2 screws E (see Figure 5) to
loosen the Cover Orn Rear (pos 119).
2) Remove 4 screws F (see Figure 6) to loosen the Cladding
Internal Left (pos 117) and Cladding Internal Right (pos
118).
2-1 2-1
Dismantling of the Control Board
DISMANTLING INSTRUCTIONS (CENTRE UNIT)
Dismantling of the Front Cover Assembly
1) Remove 2 screws B (see Figure 3 and Figure 6) and
uncatch C1 (see Figure 3) with a small size screw driver by
givivg a push in the direction as shown in Figure 4 to
separate the Front Cover Assembly from the Centre Unit
(see Service Position A for Centre Unit).
1) Remove 7 screws G (see Figure 7) to loosen the Control
Board (pos 1003-A).
2) Remove 2 screws H (see Figure 7) to loosen the IR Eye
Board (pos 1003-B).
Figure 2
Figure 3 Figure 4
Figure 5
Figure 6
Figure 7
2) Remove 8 screws A (see Figure 2) from both side of the
Centre Unit to loosen the Cladding (pos 120).

2-2 2-2
1) Remove 4 screws J (see Figure 8) from both side of the
Power Box to loosen the Cabinet Top Power Box (pos
229) and Cabinet Bottom Power Box (pos 230).
Service position A
Service position C
Service position B
DISMANTLING INSTRUCTIONS (CENTRE UNIT) DISMANTLING INSTRUCTIONS (POWER BOX)
Dismantling of the Power Box Cabinet
Figure 8
Figure 9
Figure 10
2) Uncatch C2 (see Figure 9) to separate the Cabinet Front
Power Box (pos 227) and Cabinet Rear Power Box (pos
228) from the chassis.
3) Remove 8 screws K (see Figure 10) to loosen the
Chassis Top of the Power Box (see Service positionA for
Power Box).

2-3 2-3
Service position A
Service position C
Repair Hints
1) Remove 3 screws L (see Figure 11 and Figure 12) to
loosen the Amplifier Board (pos 1102).
2) Remove 2 screws M (see Figure 12) to loosen the
Interconnect Board (pos 1103).
Service position B
DISMANTLING INSTRUCTIONS (POWER BOX)
Dismantling of the Amplifier Board and Supply Board and Interconnect Board
3) Remove 3 screws N (see Figure 11 and Figure 12) to
loosen the Supply Board (pos 1101).
DISMANTLING INSTRUCTIONS (POWER BOX)
Figure 11
Figure 12
1) WARNING
Switching Mode Power Supply (SMPS) Board consists of high voltage filter capacitors (2203 or 2210).
Safety measures must be taken by the repair technician during servicing:
- When the supply is on, avoid touching the SMPS Board and the high voltage filter capacitors (2203 or 2210).
- When the supply is off, make sure to discharge the high voltage filter capacitors (2203 or 2210) with a suitable value resistor
before any servicing to prevent electric shock.
2) The flex cables are very fragile, care should be taken not to damage them during repair. After repair, be very sure that the
flex cables are inserted properly into the flex sockets before encasing, otherwise faults may occurs.
Use a insulation sheet to
prevent any damaged or
short-circuit of the boards.
Capacitors
2203 or 2210

Various
other Tests
Activated with ACTION TEST
S EEPROM FORMAT
TEST Load default data. Display shows "NEW" for 1 second.
Caution!
All presets from the customer will be lost!!
Disconnect
mains cord
LEAVE SERVICE
TEST PROGRAM
T
9to Exit
EEPROM TEST A test pattern will be sent to the EEPROM.
"PASS" is displayed if the uProcessor read back
the test pattern correctly, otherwise "FAIL" will be
displayed.
MUTE
DEMO TOGGLE Pressing this button will toggle between "DEMO ON"
and "DEMO OFF". The DEMO status will scroll once
across the Display.
MP3-CD
Button pressed?
Y
N
MP3 MODULE
TEST
STEP
1
2
3
4
5
6
DISPLAY MESSAGE
-
-
BUS OK
-
-
FOC OK
-
-
BUS ER
-
-
FOC ER
ACTION
Indicates the module used.
Version of the MPEG software (nn = Version Number).
Communication test between the Main uP and CD Module
CD SLEDGE MOTOR is moved in.
CD SLEDGE MOTOR is moved out.
FOCUS SERVO Test.
Press 9to exit
OKAY ERROR
MP3CD
TI-Vnn
TI BUS
SLD I
SLD O
TI FOC
Choose level
by pressing
S
T
Note : Disc should be available on the tray before entering the Service Test Mode.
Figure 1 Figure 2 Figure 3
Y
N
Y
N
N
DIM
Button pressed?
DIM
Button pressed?
DIM
Button pressed?
DISPLAY
TEST
Display shows Figure 1
and switch all LEDs on
(see Table 2 - Pattern 1)
Display shows Figure 2
and switch alternate LEDs on
(see Table 2 - Pattern 2)
LEDs
SOURCE
STANDBY / ECO POWER
LCD BACKLIGHT
Pattern 1
ON
GREEN & RED
ON
Pattern 2
ON
GREEN
DIM
Pattern 3
OFF
OFF
ON
Table 2
Y
Y
N
9
Button pressed?
Display shows Figure 3
and switch all LEDs off
(see Table 2 - Pattern 3)
Y
N
Y
N
N
AUX
Button pressed?
AUX
Button pressed?
AUX
Button pressed?
ADC
TEST
Display shows "ADC Value"
for ADC 1
(Input Line - Option)
Display shows "ADC Value"
for ADC 2
(Input Line - Key1)
Y
Y
N
9
Button pressed?
ADC Test is used for checking the ADC inputs to the
microprocessor.
The display shows an ADC value between 0 and 255
for an input signal between 0 and 5V.
Display shows "ADC Value"
for ADC 3
(Input Line - Key0)
CLK/TIMER
Button pressed?
Y
Y
Y
N
N
N
CLK/TIMER
Button pressed?
9
Button pressed?
Display shows
32K
Output on Quartz-Test-Pin
pin 19 of uP = 2048Hz
Display shows
12M
Output on Quartz-Test-Pin
pin 19 of uP = 2,929.6875Hz
QUARTZ
TEST
TUNER
Button pressed?
Disconnect
Mains cord ?
Y
Y
N
N
Y
Display Tuner Version
"ccc"
Service frequencies are
copied to the RAM (see Table 1)
Tuner works normally except:
PROGRAM button
Service Mode left
TUNER
TEST
TUNER
Button pressed?
N
PRESET
1
2
3
4
5
6
7
8
9
10
11
Europe
"EUR"
87.5MHz
108MHz
531kHz
1602kHz
558kHz
1494kHz
87.5MHz
87.5MHz
87.5MHz
87.5MHz
98MHz
USA
"USA"
87.5MHz
108MHz
530kHz
1700kHz
560kHz
1500kHz
98MHz
87.5MHz
87.5MHz
87.5MHz
87.5MHz
Oversea
"OSE"
87.5MHz
108MHz
531/530kHz*
1602/1700kHz*
558/560kHz*
1494/1500kHz*
87.5/98MHz*
87.5MHz
87.5MHz
87.5MHz
98/87.5MHz*
Table 1
Note: * Depending on the selected grid frequency (9 or 10kHz).
By holding the **SOURCE and **PLAY buttons depressed while
switching on the Mains supply, the tuning grid frequency
is toggled between 9kHz and 10kHz for the Oversea (/21)
version.
To start service test program
hold ** T
& **SOURCE
depressed while
plugging in the mains cord
Display shows the
ROM version
"S-Vyy"
(Main menu)
S refers to Service Mode
V refers to Version
yy refers to Software version number of the uProcessor
(counting up from 01 to 99)
The Remote Control must already be set to "AUX" mode before pressing
any of the specified Remote Control keys in the Service Test Mode.
All test buttons mentioned in the Service Test Program are activated
from the Remote Control unless otherwise specified.
** test buttons are activated from the Set.
SERVICE TEST PROGRAM
LifeStyle Micro2002 (MZ-1x00) Service Test Program (dd wk0227)
3-1 3-1

A
H/P
3dB
Mute
MUTE_SW
+9V1
A
-8.5 dB
AUX
A
Interface
Mute1
DCCT
AUX 500mV
12dB
CDR 1V
CCT
75 ohm
Vpp 500mV
A
A
HP_DET
Proc.
Signal
S/N AT 500mW
HEADROOM (1% THD) WRT TO LEVEL AT MAX VOL
450mV
VREF
250mV
85dBA
SIS Filter
Mute2
+5V
A
A
H/P
A
DIG
DIG
67dBA
650mV
CCT
D
78dBA
3.2dB
DIG
650mV
IS
Attn
D
500mV
76dBA
16dB
DPL/
From Slot Loader
TUNER 125mV
+12V_A
REG.
XX mV
YY dBA
ZZ dB
OUT
DDIG
LEVELS AT MAX VOL
A
A
MP3/CDC
MP3/
Slot Loader
Mute
A
CCT
A
VOICE
A
Control
Provision only
Mute
Audio
NOTE :
CDC
M
A
A
Line Out
+5V
2.50V
H/P Amp
MAIN SIGNAL PATH
MEASUREMENTS ARE IN AUX MODE :
3139 119 34940_Block Diagram (Sheet 130)_dd wk0226
4-1 4-1
SET BLOCK DIAGRAM

CD
LEGEND
1501
1120
1506
1752
# XXXX
1241
POWER AMP 1
1130 FFC 8P/100/8P AD FOLD
1101
HR 6P/140/6P OE
P XXXX
1802
1751
1201
FFC 15P/120/15P BD
# XXXX# XXXX
# FFC 04P
P 1801
# XXXX
LCD
CONTROL BOARD
[ FRONT uP + AF 2Ch + MP3/CD ]
COMBI BOARD 1
# FFC 19P
(CONTROL)
FFC 4P/060/4P BD
1830
1202
(IR EYE)
CD SLOT LOADER MODULE
1401
# XXXX
# FFC 19P
MP3
# XXXX
# XXXX
# FFC 10P
FFC 9P
(TOHEI)
CONTROL BOARD
1802
P XXXX
P 1302
1503
[ CD/MP3 ]
P XXXX
P XXXX
P FFC 06P
0021
# XXXX
MP3
# FFC 04P # FFC 04P
(TOHEI/SD4-SACHI)
(DVD version only) (DVD version only)
(DVD version only)
# - DVD version only
P - Provision
# DVD SLOT LOADER MOD
1701
TUNER ECO6
SMPS
(SUPPLY)
1
VOICE CONTROL
P 1301
# XXXX
FFC 09P/220/9P
BD FOLD
1200
0386
# HDR 36P
CABLE INTERCON 20P
1601
# XXXX
1750
P FFC 04P
POWER
BOX
# [ FRONT uP + AF 5.1Ch + DVD ]
MIC
(Provision)
(Provision)
P FFC 06P
# A/V BOARD
(5.1Ch)
[ CL-5, 2Ch, 2x25W ]
1504
1220
1201
1210
P XXXX
# COMBI BOARD 2
# FFC AD 18P XXXX
P 1810
1230
1202
FFC 8P/220/8P BD FOLD
( PART OF LCD MODULE )
CD
INTERCONNECT PCB
1202
MODULE
1203
P 1820
P 1507
# XXX
# XXXX
X
1131
FFC 15P/100/15P AD FOLD
3139 119 34940_Wiring Diagram (Sheet 132)_dd wk0226
(Provision)
DIGITAL OUT
5-1
SET WIRING DIAGRAM
5-1

NO SYMBOL I/O FUNCTION
1. CS I Chip Selection
2. WR I Write Clock Input
3. RD I Read Clock Input
4. DATA I/O Serial Data Input/Output
5. VSS P Power Supply
6. VDD P Power Supply
7. VO P LCD Power Input
8. LED+(A) P Power Supply for LED
9. LED-(K) P Power Supply for LED
INTERFACE PIN FUNCTION
C1
S1 S32
C2
C3
C4
C4
C3
C2
C1 S1 S32
LCD PANEL
BLOCK DIAGRAM
LCD MODULE
IC HT1621
LED
19
11 CHARACTERS
20 ICONS
LED-(K) LED+(A) VO VDD VSS DATA RD WR CS
6-1
CONTROL BOARD
TABLE OF CONTENTS
LCD Module - Block diagram .......................................... 6-1
LCD Module - Interface Pin Function .............................. 6-1
Control Part - Component & Chip layout ......................... 6-2
Control Part - Circuit diagram .......................................... 6-3
IR Eye Part - Component & Chip layout ......................... 6-3
IR Eye Part - Circuit diagram .......................................... 6-3
Electrical parts list............................................................ 6-4
6-1

6-26-2
CONTROL BOARD - COMPONENT LAYOUT CONTROL BOARD - CHIP LAYOUT
This assembly drawing shows a summary
of all possible versions. For components
used in a specific version see schematic
diagram and respective parts list.
3139 113 3485 pt1 dd wk0226
This assembly drawing shows a summary
of all possible versions. For components
used in a specific version see schematic
diagram and respective parts list.
3139 113 3485 pt1 dd wk0226
4103
4104
4105
4106

6-3 6-3
CONTROL BOARD - CIRCUIT DIAGRAM
GND
GND
D
E
A
B
C
D
E
1210 B1
1220 D1
1225 E3
1700 A2
1701 B3
1702 B3
1703 B4
1704 B4
RC5
Key0
12345
12345
A
B
C
LED_1
1705 A3
1706 A3
1710 C2
2705 A3
2706 B5
3700 C3
3701 D3
3702 C3
3708 D3
3711 A2
3712 A3
3714 B3
3715 B4
3716 B4
LPSKey
LPS_Led
6703 C4
6704 D4
6720 C5
+5V6_con
Key1
LED_2
GND
3702
150R
150R
6720
6703
1705
GND-B
1700
+5V6_con
RC5
3716
270R
1702
1704
150R
3714
# 3708
120R
3715
220R
9
GND-B
100p
2706
1210
FE-ST-VK-N
1
2
3
4
5
6
7
8
2705
100p
GND-B
GND-B
GND-B
GND-B
GND-B
GND-B
FE-ST-VK-N
1220
1
2
3
4
6704
GND-B GND-B
GND-B GND-B
1710
120R
3701
220R
3712
GND-B
GND-B
3700
1701
1706
# 1225
RT-01T1
gnd_emc
3711
150R
3139 118 55990...8239_210_91261_01...for 3485 pt1 dd wk0226
CONTROL
1703
+5V6_con
RC5
Note : Some values may varies, see respective
parts list for correct value.
# : Provision
IR EYE BOARD - CIRCUIT DIAGRAM
IR EYE BOARD - COMPONENT LAYOUT IR EYE BOARD - CHIP LAYOUT
DEM BAND
PASS
CTRL
CIRCUIT
AGC
INP
PIN
GND
1234
1234
A
B
A
B
1230 B1 2700 A3 2701 A2 2702 B2 3703 A2 3704 B3 3705 A3 7600 A3
GND
+5V6_con
RC5
2
3
4
3705
10K
3704
1K
GND
GND
FE-ST-VK-N
1230
1
2VS
GND
47u
2700
TSOP2236
7600
3 GND
1 OUT
2702
2n2
GND
GND
47n
2701
100R
3703
3139 118 55990...8239_210_93161_01...for 3485 pt1 dd wk0226
Note : Some values may varies, see respective parts list for correct value.
IR EYE
This assembly drawing shows a summary of all possible
versions. For components used in a specific version see
schematic diagram and respective parts list.
3139 113 3485 pt1 dd wk0226
This assembly drawing shows a summary of all possible
versions. For components used in a specific version see
schematic diagram and respective parts list.
3139 113 3485 pt1 dd wk0226

6-4 6-4
ELECTRICAL PARTS LIST - CONTROL BOARD
MISCELLANEOUS
1210 4822 265 11531 Flex Connector 9P
1220 4822 265 11183 Flex Connector 4P
1230 4822 265 11183 Flex Connector 4P
1700 4822 276 13775 Tact Switch
1701 4822 276 13775 Tact Switch
1702 4822 276 13775 Tact Switch
1703 4822 276 13775 Tact Switch
1704 4822 276 13775 Tact Switch
1705 4822 276 13775 Tact Switch
1706 4822 276 13775 Tact Switch
1710 4822 276 13775 Tact Switch
CAPACITORS
2700 4822 124 81286 47uF 20% 16V
2701 3198 017 34730 47nF 16V
2702 4822 126 14238 2,2nF 50V
2705 2020 552 94427 100pF 5% 50V
2706 2020 552 94427 100pF 5% 50V
RESISTORS
3700 4822 051 30151 150R 5% 0,062W
3701 4822 051 30121 120R 5% 0,062W
3702 4822 051 30151 150R 5% 0,062W
3703 4822 051 30101 100R 5% 0,062W
3704 4822 051 30102 1k 5% 0,062W
3705 4822 051 30103 10k 5% 0,062W
3711 4822 051 30151 150R 5% 0,062W
3712 4822 051 30221 220R 5% 0,062W
3714 4822 051 30151 150R 5% 0,062W
3715 4822 051 30221 220R 5% 0,062W
3716 4822 051 30271 270R 5% 0,062W
4103 4822 051 30008 0R Jumper 0603
4104 4822 051 30008 0R Jumper 0603
4105 4822 051 30008 0R Jumper 0603
4106 4822 051 30008 0R Jumper 0603
DIODES
6703 9322 183 96676 LED VS LTL-816GE
6704 9322 178 15676 LED VS LTL-8166FTNN
6720 9322 179 76676 LED VS LTL-816EELC
TRANSISTORS & INTEGRATED CIRCUITS
7600 9322 155 82667 IR Receiver TSOP2236ZC1
Note : Only the parts mentioned in this list are normal
service spare parts.

7A-17A-1
1
FM
Osc.
FM
Mixer
AM
Mixer
AM
Osc.
AM IF
IF1 IF2 FM
Det.
AM
Det.
3393733
RADIO IC
TEA 5757H
TUNER BOARD
ECO 6
Systems
1018 11 14
15
24
right right
left
left
stereo
VCO
4140 36 193244 25
Stereo
Decoder
AFC
AFC + AFC -
4
4
AGC
Pre-
scaler Multi-
plexer
Charge
pump
Stabilizer
CONTROL
Reference
Oscillator
29
28
27
clock
data
enable
P1
P0
31
30
programmable
output ports
VLoop
VLoop
VLoop
VLoop
VLoop
2
6
5
43
C
D
450kHz450kHz450kHz
20
75kHz
VStabAV
StabBV StabB
VStabA VStabB
10,7 MHz 10,7 MHz
35 9
Vdd Vcc1
723
VStabA
VStabB
38
34
22
Vcc2
8
ECO6 Systems, 140499
LF filter
RDS
(MPX)
RDS
(MPX)
stereo
clock
data
enable
Version
1120
1
8
FM
Frontend
AM
Frontend
AM-FRAME AERIAL
B
1103
1101
(1102)
AFM
MPX
buffer ampl.
5
Discriminator
10,7 MHz
Vdd
Vcc1
Vcc
Vcc2
AM-RF
AM-Osc.
FM-Osc.
FM-RF FM-IF 1 FM-IF 2
AM-IF 1 AM-IF 2
AM-AFC
3
2
BLOCK DIAGRAM
ECO6 Tuner Board
version: SYSTEMS non-CENELEC
TABLE OF CONTENTS
Blockdiagram ..................................................................7A-1
Schematic Diagram.........................................................7A-2
Component Layout..........................................................7A-3
Adjustment table .............................................................7A-3
Electrical Partslist............................................................7A-4

7A-2 7A-2
ECO6 Sys-non Cenelec, 000911
1101 A1
1102 B1
1103 F2
1120 E14
1130 A2
1131 B2
1132 G13
2101 B3
2102 B1
2103 C7
2104 B3
2105 A2
2106 F3
2107 F4
2119 H6
2120 G6
2124 H6
2125 H6
2126 F7
2127 E7
2128 C8
2129 C7
2130 F11
2131 G8
2132 G8
2133 G8
2134 H8
2135 H9
2136 G14
2137 G13
2138 F9
2139 G9
2140 G9
2141 F10
2143 G12
2144 G11
2145 F12
2146 E12
2147 E12
2148 E12
2149 H7
2150 A10
2152 E4
2153 E5
2154 D5
2155 D5
2159 F6
2161 C11
2163 D11
2164 F10
2165 C7
2166 E11
2167 E11
2169 H8
3101 E4
3102 D4
3103 C6
3104 A7
3105 B6
3132 G5
3134 H6
3141 E7
3142 E7
3143 G7
3144 H7
3145 F8
3146 G13
3152 G14
3153 G13
3154 G13
3155 G11
3156 C12
3157 C12
3158 E13
3159 D13
3160 D12
3161 D13
3167 F12
3168 F11
3169 E11
3170 C12
3172 G12
3176 G7
3181 E6
5102 F2
5109 B9
5110 B10
5111 A8
5112 A11
5114 B11
5119 G9
5121 E11
5123 G5
5130 E5
5131 C6
6103 B2
6105-1 F3
6105-2 G5
6106 C3
6107 G13
6120 C13
6130 E5
6131 D5
7101 C8
7102 C6
7103 H7
7111 C13
7112 G12
T102 B2
T103 B2
T105 F2
T106 F2
T109 B6
T110 F5
T111 F4
T112 F7
T113 A8
T114 B10
T115 A8
T116 F10
T117 G13
T118 G11
T120 F13
T121 F13
T122 F13
T123 E13
T124 G14
T125 F14
T126 F13
T127 F13
T128 D7
T140 F11
T141 F10
T142 F10
1
34
6
87
2
1
34
6
87
2
LEGEND
p ...for provision only
USA ... for USA version only
E-EU ... for East European version only
22n
USA
22n
USA
p
p
p
7
1
2
3
8
6105
6
HN1V02H
54
36
1
2
7
29
25
13
30
31
16
4
42
15
1
7
22
9
23
38 34
2118
37 35
33
43 39
5
3
8
171412
24
11
10
2019
44
32
41 3640
6
2
27
28
26
1
3
4
5
6
87
2
1
34
6
87
2
1
34
6
87
2
p
SCALER
MULTI-
PLEXER
CONTROL
FILTER
AM
IF
AM
DET
FM
DET
VSTABB
DECODER
CHARGE
PUMP
AGC
OSC
AM DET
FM
IF2
RIPPLE
AGC
STABILIZER
AFC
VDD
VSTABA
AM-IF
MONO/
FM
FRONTEND
CONTROL
XTAL
AGC
PRE-
CTRL
AGC
AM
OSC
AGC
VCC2
FM
OSC
AM
MIXER
MIXER
FM
FM
IF1
FRONTEND
AM
STEREO
STEREO
RDS only
DISCRIMINATOR
to/from
FM-OSCILLATOR
PROGR.
MPX
Q-multiplier
MW
OUTPUT PORTS
to 1120
pin 5
ENABLE/MPX
BUFFER
kHz
VERSION DETECTION
VCO
RIGHT
14
12 3
AM FRAME AERIAL
DATA
C
D
E
F
AM-OSCILLATOR
FM 75 OHM
FM-IF2
MW
2345
AM-RF
450kHz
450kHz
AM-IF2
from 2169
78
AM-AFC
LEFT
6 7 8 9 10 11 12 13
456
FM-RF
TUNER BOARD ECO6 / SYSTEMS NON CENELEC
9 1011121314
A
B
G
H
A
B
1
VCC
STEREO
CLOCK
AMPLIFIER
GND
H
C
D
E
F
G
470n
2132
BAS216
6120
2103
1u
2107
1n
3134
22K
6105-2
HN1V02H
100n
2163
T141
7KL
1K
3144
5102
3157
100K
T109
470R
3153
2130
22n
220R
3105
3142
100K
3167
120R
33p
2149
2K2
3145
1132
C-PAD
T103
T111
2164
470n
T102
2140 15p
2139
2138
2u2
82p
2133
1u
3103
8K2
T120
4p7
2154
3156
1101
USA
YKD21
100K
2161
100n
5119
2119
10p
T142
5123
11p
2106
3172
6106
BAS216
100n
2165
5K6
3154
3155
220R
330R
2124
33K
3176
22n
WRITE-EN
5114
7P
MUTE
P0
P1
PILOT
RF-GND1
RF-GND2
RIGHT
RIPPLE
VCC1
VCC2
VCO
VDD
VSTABA
VSTABB
FM-DEMOD
FM-IF1-IN
FM-IF2
FM-IF2-IN
FM-IN
FM-MIXOUT
FM-OSC
FM-RF
I-TUNE
IF-GND
LEFT
LPF
MPX-IN
AF-OUT
AFC+ AFC-
AGC
AM-AFC
AM-IF1-IN
AM-IF2
AM-MIXOUT
AM-OSC
AM-RF
CLOCK
DATA
DIG-GND
FIELDSTR-IND
5130
T127
T126
220n
2127
5121
DT-381
150K
3169
75K
3102
100K
56K
3141
1131
C-PAD
3132
5112
7P
6107
47R
6131
1SV228
BZX284-C11
1120
FE-BT-VK-N
T118
T140
T117
T112
2131
470n
33K
3101
1SV228
6130
3168
120R
2125
560p
T116
2n2
2148
100n
2141
470R
18p
2120
470R
3158
3152
3159
XH-S
1103
3160
470R
470R
220n
2143
2150
T125
1
2
3
4
5
6
7
8
22R
3146
BF550
7102
5131
11p
2155
O
100K
5110
G
I
1102
not USA
3170
T122
2135
15n
2167
2145
220p
T110
12p
HN1V02H
1n
2166
T105
6105-1
T106
T121
T123
BC547C
7112
3143
2129
100u
C-PAD
1130
22K
220n
2137
T128
3181
1K
330p
2126
2101
47p
BAV99
6103
2104
100p
2153
15p
T124
2152
33n
560p
E-EU
12p
E-EU
2p2
J
33p
2159
220p
2146
2169
2n2
1u
15n
2134
2144
220n
2136
22K
3161
BC857C
BC847C
7111
7103
2147
220p
VCC2
VCC2
VDD
T114
MPX
P1
P0
P1
VDD
MPX
VCC1
VCC1
VCC1
printed
printed
printed
1
2
13
2
1
2
3
1
2
TEA5757H
TEA5759H
J
7101
2128
10u
7111
component mounted
/14 FM-OIRT/MW
/00 /02 FM/MW/LW
6120 3170
/01 FM/MW
VERSION
/00 /02 FM/MW
3156
/17 FM/AM
/06 FM-Japan/AM
3157
VERSION PROGRAMMING COMPONENTS
J ... for Japanese version only
AM-IF1
450kHz
8
5111
1
2
3
4
6
7
T113
T115
FM-IF1
2
G
1
I
3
O
5109
3104
330R
100n
0R
4103
...V MW mode
...V LW mode
voltages measured while
set is tuned to a strong transmitter
...V FM mode stereo
EVM
V
5V
0V
152kHz, 50mVpp
stereo stereomono
9.6V
9.5V
9.5V
10.4V
12V
1V
1.3V
1.4V
stereo 0.2V
mono 4.8V
9.6V
12Vtyp
stereo 0.4V
0.15V
11.1V
7.8V
2V
0.7V
0V
1.2V
7.6V
(10-14V)
0.2V
0V
1.2V
0.1V
D
1.4V
0.7V
4
0V
0V
mono 4.8V
1.4V
9.6V
1.4V
0.2V
0.7V
1.4V
7.9V
7.7V
0V
0V
0V
0V
0.6V
0.8V
0.1V
1.6-8V
1-8V
11.1V
0V
1V 1.4V 1.4V
B
7.6V
5
3
2
A
1.3V
0.7V
7.8V
11.1V
0.8V 0.6V 0.6V
1V
0.7V
1V
1.1V
1.1V
0V
0V
2V
C
1
0.8V
1.2V
1.1V
IF-AMP.
BFS20
7119
J
1K
3113
J
2112
J
100p
330R
3119
J
Signal path
FM
AF - left/right
AM
MPX (Audio Frequency)
2102
100n
2105 USA
100n

7A-37A-3
VARICAP ALIGNMENT
FM RF
FM IF
VCO
AM IF
AM RF
3)
108MHz
87.5MHz
(65.81MHz)
87.5MHz
(65.81MHz)
87.5MHz
(65.81MHz)
279kHz
153kHz
1602kHz
531kHz
5130
check
5122
check
5123
check
8V ±0.2V
4.3V ±0.5V
(1.2V ±0.5V)
8V ±0.2V
1.1V ±0.4V
8V ±0.2V
1.1V ±0.4V
1494kHz
558kHz
560kHz 5102
1500kHz
5103198kHz
1494kHz
558kHz
560kHz
1500kHz
198kHz
2106
5102
2106
3142 152kHz ±1kHz 1)
98MHz
5112
MAX
FM
87.5 - 108MHz
(65.81 - 74, 87.5 - 108MHz)
LW
153 - 279kHz
MW
FM/MW/LW- version, 9kHz grid
531 - 1602kHz
1700kHz
530kHz
5123
check
8V ±0.2V
1.1V ±0.4V
1602kHz
531kHz
5123
check
6.9V ±0.2V
1.1V ±0.4V
108MHz 108MHz 2155
5131
MW
FM/AM-version, 10kHz grid
530 - 1700kHz
FM
MW
LW
98MHz, 1mV
continuous wave
450kHz
connect pin 6 of
IC 7101 (AM Osc.)
with 3.3kΩto Vcc
Use Service Testprogram. By selecting the TUNER TEST test frequencies will be stored as preset frequencies automatically.
4
1
3
5
5
A
A
5119FM 10.7MHz, 45mV
continuous wave 2D
mod=1kHz
∆f=±22.5kHz
1)
If sensitivity of frequency counter is too low adjust to max. channel separation
(input signal: stereo left 90% + 9%, adjust output on right channel to minimum)
Repeat
ECO6, Sys + PA with frame aerial, 070799
TUNER ADJUSTMENT TABLE ( ECO6 FM/MW- and FM/MW/LW - versions with AM-frame aerial )
∆f=±10kHz
VRF = 0.5mV
C
see
remark 2)
220R
100nF
36
IC 7101
220R
100nF
40
IC 7101
2141
shortcircuit
to block AFC
21
IC 7101
max.
symmetric
fo
AM AFC
MW C
continuous wave
VRF = 2mV
5111
5114 20 ±2 mV DC
0 ±3 mV DC
MW 4)
FM/MW/LW- and FM/MW-version
( 9kHz grid)
531 - 1602kHz
B
∆f = ±30kHz
V
RF
as low as
possible
max.
symmetric
fo
MW
FM/AM-version, 10kHz grid
530 - 1700kHz
3)
For AM RF adjustments the original frame antenna has to be used !
2)
RC network serves for damping the IF-filter while adjusting the other one.
4)
MW has to be aligned before LW.
Waverange Input frequency Input Tuned to Adjust Output Scope/Voltmeter
FM
87.5 - 108MHz
(65.81 - 74, 87.5 - 108MHz)
FM/MW-version, 9kHz grid
531 - 1602kHz
(as low as
possible)
ECO6 System non Cenelec stage .3, 120900
TUNER BOARD ECO6 Systems non Cenelec / componentside view
1101 A6
1102 B6
1103 D6
1120 A4
1130 B5
1131 D5
1132 A5
2106 C5
2107 B5
2128 C4
2129 B4
2133 D2
2138 C2
2144 B2
2155 C4
3142 D2
5102 D6
5109 A3
5110 B3
5111 B4
5112 A3
5114 A2
5119 C2
5121 B2
5123 D5
5130 D3
5131 D4
7112 C1
9101 A2
9103 B2
9104 B5
9105 B1
9106 B3
9107 D4
9108 C4
9109 D2
AM FRAME AERIAL
FM 75Ω
B
A
TUNER BOARD ECO6 Systems - non Cenelec / copperside view
2101 B4
2102 B1
2103 D4
2104 B4
2105 C1
2112 B5
2119 D3
2120 D3
2124 D3
2125 D3
2126 D6
2127 C5
2130 D5
2131 C5
2132 D6
2134 D7
2135 D7
2136 A4
2137 A4
2139 C6
2140 C6
2141 C6
2143 C7
2145 A5
2146 B7
2147 A5
2148 B6
2149 D6
2150 B5
2152 C5
2153 C5
2154 C4
2159 C5
2161 A6
2163 B6
2164 C6
2165 C4
2166 B6
2167 B6
2169 A4
3101 D5
3102 C3
3103 C4
3104 B4
3105 C4
3113 B5
3119 B5
3132 D5
3134 D3
3141 C5
3143 D6
3144 B7
3145 C5
3146 C7
3152 A4
3153 A4
3154 C7
3155 C7
3156 A6
3157 A6
3158 A4
3159 A5
3160 A5
3161 A5
3167 B7
3168 C7
3169 B6
3170 A6
3172 C7
3176 D6
3181 D4
4103 B5
4106 C4
4107 C5
4108 C5
6103 B3
6105 C3
6106 C3
6107 C7
6120 A6
6130 D4
6131 C4
7101 C5
7102 D4
7103 D7
7111 A5
7119 B5
These assembly drawings show a summary of all possible versions.
For components used in a specific version see schematic diagram respectively partslist.
ECO6 Systems non CENELEC stage .3, 120900
41..
in schematic diagram)
(not all items shown
SMD jumper
EB
C
A
K
1
2
7
8
4
D
A
C
1
2
5
3
Vdd
Vcc2
Vcc1

MISCELLANEOUS
–––––––––––––––––––––––––––––––––––––––––––––––––––––
1101 2422 015 19376 SOCKET 2P CLICKFIT USA only
1102 4822 267 10283 SOCKET COAX, IEC 75Ωnot USA
1103 4822 265 31184 JST CONNECTOR 2 POLE
1120 4822 265 11515 FFC SOCKET, 8P
CAPACITORS
–––––––––––––––––––––––––––––––––––––––––––––––––––––
2101© 4822 126 13692 47pF 1% 63V
2102© 4822 126 13838 100nF 10% 50V not USA
2103© 5322 122 31647 1nF 10% 63V
2104© 5322 122 32531 100pF 5% 50V
2105© 4822 126 13838 100nF 10% 50V USA only
2106 2020 800 00191 3-11pF TRIMCAP.,N450
2107 4822 121 51319 1µF 20% 50V
2120© 4822 126 13689 18pF 1% 63V
2124© 5322 122 32654 22nF 10% 63V
2125© 2020 552 96199 560pF 1% 50V
2126© 5322 122 31863 330pF 5% 50V
2127© 4822 126 14076 220nF 20% 25V
2128 4822 124 40248 10µF 20% 63V
2129 4822 124 41584 100µF 20% 10V
2130© 5322 122 32654 22nF 10% 63V
2131© 4822 126 13482 470nF 20% 16V
2132© 4822 126 13482 470nF 20% 16V
2133 4822 124 21913 1µF 20% 63V
2134© 4822 126 13188 15nF 5% 63V not USA
2134© 5322 122 32654 22nF 10% 63V USA only
2135© 4822 126 13188 15nF 5% 63V not USA
2135© 5322 122 32654 22nF 10% 63V USA only
2136© 4822 126 14076 220nF 20% 25V
2137© 4822 126 14076 220nF 20% 25V
2138 4822 124 22652 2,2µF 20% 50V
2139© 4822 126 14236 15pF 5% 50V
2140© 4822 126 13695 82pF 1% 63V
2141© 4822 126 13838 100nF 10% 50V
2143© 4822 126 14076 220nF 20% 25V
2144 4822 124 21913 1µF 20% 63V
2145© 4822 122 33575 220pF 5% 50V
2146© 4822 122 33575 220pF 5% 50V
2147© 4822 122 33575 220pF 5% 50V
2148© 4822 122 33127 2,2nF 10% 63V
2149© 5322 122 32659 33pF 5% 50V RDS only
2150© 4822 126 13838 100nF 10% 50V
2152© 4822 126 12105 33nF 5% 63V not for East Europe
2152© 5322 116 80853 560pF 5% 63V for East Europe only
2153© 4822 126 13486 15pF 2% 63V not for East Europe
2153© 4822 122 33926 12pF 2% 50V for East Europe only
2155 2020 800 00191 3-11pF TRIMCAP.,N450
2159© 5322 122 32659 33pF 5% 50V
2164© 4822 126 13482 470nF 20% 16V
2165© 4822 126 13838 100nF 10% 50V
2166© 5322 122 31647 1nF 10% 63V
2167© 4822 122 33926 12pF 5% 50V
2169© 4822 122 33127 2,2nF 10% 63V RDS only
RESISTORS
–––––––––––––––––––––––––––––––––––––––––––––––––––––
3101© 4822 051 20333 33kΩ5% 0,1W
3102© 4822 117 10837 100kΩ1% 0,1W
3103© 4822 051 20822 8,2kΩ5% 0,1W
3104© 4822 117 13577 330Ω1% 0,1W
3105© 4822 117 11503 220Ω5% 0,1W
3132© 4822 051 20479 47Ω5% 0,1W
3134© 4822 051 20223 22kΩ5% 0,1W
3141© 4822 117 11148 56kΩ1% 0,1W
3142 4822 100 12159 TRIMPOT. 100kΩ
RESISTORS
–––––––––––––––––––––––––––––––––––––––––––––––––––––
3143© 4822 051 20223 22kΩ5% 0,1W RDS only
3144© 4822 051 10102 1kΩ2% 0,25W RDS only
3145© 4822 117 11449 2,2kΩ1% 0,1W
3146© 4822 051 20229 22Ω5% 0,1W
3152© 4822 051 20471 470Ω5% 0,1W
3153© 4822 051 20471 470Ω5% 0,1W
3154© 4822 117 13577 330Ω1% 0,1W
3155© 4822 117 11503 220Ω5% 0,1W
3156© 4822 117 10837 100kΩ1% 0,1W
3157© 4822 117 10837 100kΩ1% 0,1W
3158© 4822 051 20471 470Ω5% 0,1W
3159© 4822 051 20471 470Ω5% 0,1W
3160© 4822 051 20471 470Ω5% 0,1W
3161© 4822 051 20223 22kΩ5% 0,1W
3167© 4822 051 20121 120Ω5% 0,1W
3168© 4822 051 20121 120Ω5% 0,1W
3169© 4822 051 20154 150kΩ5% 0,1W
3170© 4822 117 10837 100kΩ1% 0,1W
3172© 4822 051 20562 5,6kΩ5% 0,1W
3176© 4822 051 20333 33kΩ5% 0,1W RDS only
3181© 4822 051 10102 1kΩ2% 0,25W
4103© 4822 051 20008 CHIP JUMPER 0805
4106© 4822 051 20008 CHIP JUMPER 0805
4107© 4822 051 20008 CHIP JUMPER 0805
4108© 4822 051 20008 CHIP JUMPER 0805
COILS
–––––––––––––––––––––––––––––––––––––––––––––––––––––
5102 4822 157 71634 RF-COIL MW
5109 4822 242 70665 FM-IF FILTER 10,7MHz
5110 4822 242 70665 FM-IF FILTER 10,7MHz
5111 2422 549 44023 AM-IF FILTER 450kHz
5112 4822 157 70302 AM-IF FILTER 450kHz
5114 4822 157 70302 AM-IF FILTER 450kHz
5119 4822 157 11443 DISCRIMINATOR COIL
5121 4822 242 10261 QUARTZ 75kHz
5123 2422 549 44108 RF-COIL, AM-OSCILLATOR
5130 4822 157 11843 RF COIL 1,5 TURNS
5131 4822 157 11843 RF COIL 1,5 TURNS
DIODES
–––––––––––––––––––––––––––––––––––––––––––––––––––––
6103© 5322 130 34337 BAV99
6105© 4822 130 83075 HN1V02H
6106© 4822 130 83757 BAS216
6107© 9340 386 90115 BZX284-C11
6120© 4822 130 83757 BAS216
6130© 4822 130 82833 1SV228
6131© 4822 130 82833 1SV228
TRANSISTORS
–––––––––––––––––––––––––––––––––––––––––––––––––––––
7102 4822 130 42131 BF550
7103© 5322 130 42756 BC857C RDS only
7111© 5322 130 42755 BC847C
7112 4822 130 44503 BC547C
INTEGRATED CIRCUITS
–––––––––––––––––––––––––––––––––––––––––––––––––––––
7101© 9351 740 80557 TEA5757H/V1, RADIO IC
7A-4
Electrical Partslist ECO6 SYSTEMS NON - CENELEC
7A-4