Sound Projections OPT-101 User manual

Program Play
1. Insert CD. Press PROG bu on to enter program mode.
2. Enter selected track by using the I SKIP I bu ons followed by PROG but-
ton. Repeat un l all tracks are programmed.
(NOTE: When using the remote control for programming, selected tracks may be entered
directly by using the 0 through 9 numbers on the remote control keypad).
3. To play programed tracks, press PLAY bu on.
(NOTE: To return to normal play mode from program mode, press STOP bu on
followed by PLAY bu on. To return back to program mode press STOP bu on
followed by PROG bu on followed by PLAY bu on)
4. To clear programmed tracks, press PROG bu on followed by STOP bu on.
(NOTE: Programed tracks will be erased upon power off of the CD player)
To program tracks on CD (not MP3)
To program MP3 tracks on CD or USB key
1. Insert CD or USB key. Press PROG bu on to enter program mode.
2. Press the I SKIP I bu ons to select folder. Press PROG bu on again fol-
lowed by I SKIP I bu ons for desired track followed by PROG bu on.
Repeat un l all tracks are programmed.
3. To play programed tracks, press PLAY bu on.
(NOTE: to return to normal play mode from program mode, press STOP bu on
followed by PLAY bu on. To return back to program mode press STOP bu on
followed by PROG bu on followed by PLAY bu on)
4. To clear programmed tracks, press PROG bu on followed by STOP bu on.
(NOTE: Programed tracks will be erased upon power off of the CD player)
ESP bu on (Electronic Shock Protec on, APPLIES TO CD ONLY)
The ESP bu on turns Electronic Shock Protec on off /on. ESP on is default.
(NOTE: Recommend to Always leave ESP set to “on”)
ID3 bu on (on remote control only)
Press ID3 bu on to display the  tle, ar st, or album on upper display line. Tracks
without this program informa on may display nothing.
560-0031 Rev A opt-101 02/2013
www.soundprojec ons.com
4
User Guide
For OPT-101 CD/MP3-USB Player
1

BEFORE YOU BEGIN:
The OPT-101 will play Compact Discs recorded in stadard format and MP3 fi les
recorded to CD and to USB key.
NOTE: If you plan to copy MP3 fi les from your iTunes directory, make sure your im-
port se ngs are correct. By default, iTunes imports fi les as .AAC, not .MP3. Please
follow the steps below to verify your iTunes se ngs:
- Open your iTunes program
- Click Edit > Preferences
- Under the “General Tab”, click the “Import Se ngs” bu on
- Verify “import using” > MP3 Encoder
By changing this se ng, all FUTURE imports will be saved as .MP3. Any fi les that
you have already saved in other formats will have to be converted to .MP3 before
they can be played in the OPT -101 player.
Built-in CD/MP3 Player with USB
This User Guide is for Sound Systems with the op onal built-in CD/MP3
player (OPT-101). If your CD player does not look like the image below, con-
tact Sound Projec ons for the correct instruc ons for your player.
Opera ng the CD Player
1. Turn the sound system’s main power “on”.
2. CD Player will automa cally turn on when system is turned on.
3. Gently push a CD into the slot un l the auto-load mechanism responds
Note: Do not force CD into player, as damage may result
4. To turn off player, push and hold Power bu on un l screen displays
“good bye”.
!! Cau on: This player does not accept 8-cm diameter CD’s.
2
Playback of MP3 tracks recorded on CD
CD Playback
1. Press the Play bu on .
2. Adjust the volume control knob on the main system.
• To Pause, press the Pause bu on; press again to resume play.
• To skip tracks press I SKIP I.
To fast forward or reverse: Press, and hold, the I SKIP I.
• To stop, press the STOP/EJECT bu on
• Press the STOP/EJECT bu on again to remove the CD.
Playback of MP3 tracks recorded to USB
1. Insert a USB memory key into the unit.
2. Press the FUNC bu on un l the “USB” is displayed
3. Press the PLAY bu on to begin play of fi rst MP3 track. (NOTE: If all MP3
tracks are in folders, playback will begin on fi rst track of fi rst folder)
4. To play a desired track: Press the FOLDER bu ons un l the spe-
cifi c folder is displayed. Press the I SKIP I bu ons to select specifi c
track. (NOTE: During playback, you may use the FOLDER bu ons
to change to other folders.)
!! NOTE: Be sure to turn the CD/MP3 player off before removing the USB key.
Repeat Mode
Press REPEAT bu on one or more  mes to select one of the following
modes: Repeat Track, Repeat Folder (.MP3 mode only), Repeat All, Play All
Random, and Play All.
A-B Mode (use to select a por on of a track to playback repeatedly)
While track is playing, press the A-B bu on once at the beginning of the
por on you want to select (B will begin fl ashing in the display). Press the
A-B bu on again to select the end of the sec on you wish to playback. The
selected sec on will then play repeatedly.
To return to normal play, press the A-B bu on again.
1. Insert a CD into the unit.
2. Press the FUNC bu on un l the “CD” is displayed
3. Press the PLAY bu on to begin play of fi rst MP3 track. (NOTE: If all MP3
tracks are in folders, playback will begin on fi rst track of fi rst folder)
4. To play a desired track: Press the FOLDER bu ons un l the spe-
cifi c folder is displayed. Press the I SKIP I bu ons to select specifi c
track. (NOTE: During playback, you may use the FOLDER bu ons
to change to other folders.)
3