Sound Sation GO-SOUND 12 AMW User manual

GO-SOUND 12/15AMW
Portable Pa Systems with MP3/Bluetooth,
Trolley and Battery
Please read this manual carefully and properly take care of it
USER MANUAL
Leggete questo manuale e conservatelo per future consultazioni
MANUALE UTENTE

Dear customer,
First of all thanks far purchasing a SOUNDSATION® product. Our mission is to satisfy
all possible needs of musical instrument and professional audio users oering a wide
range of products using the latest technologies.
We hope you will be satised with this item and, if you want to collaborate, we are
looking for a feedback from you about the operation of the product and possible
improvements to introduce in the next future. Go to our website www.soundsation-
music.com and send an e-mail with your opinion, this will help us to build instruments
ever closer to customer’s real requirements.
One last thing: read this manual before using the instrument, an incorrect operation
can cause damages to you and to the unit. Take care!
The SOUNDSATION Team
Gentile Cliente,
Grazie per aver scelto un prodotto SOUNDSATION®. La nostra missione è quella di
orire ai nostri utenti una vasta gamma di strumenti musicali ed apparecchiature audio
e lighting con tecnologie di ultima generazione.
Speriamo di aver soddisfatto le vostre aspettative e, se voleste collaborare, saremmo
lieti di ricevere un vostro feedback sulla qualità del prodotto al ne di migliorare co-
stantemente la nostra produzione. Visitate il nostro sito www.soundsationmusic.com ed
inviateci una mail con la vostra opinione, questo ci aiuterà a sviluppare nuovi prodotti
quanto più vicini alle vostre esigenze.
Un’ultima cosa, leggete il presente manuale al ne di evitare danni alla persona ed al
prodotto, derivanti da un utilizzo non corretto.
Il Team SOUNDSATION

3
ENGLISH
TABLE OF CONTENTS
1. BEFORE YOU START...................................................................................................6
1.1. Unpacking.................................................................................................................................................................6
1.2. Getting Started........................................................................................................................................................6
2. SOUNDSATION GO-SOUND AMW SERIES .............................................................6
2.1. Main Features..........................................................................................................................................................7
3. CONNECTIONS ..........................................................................................................7
3.1. Mains Connection..................................................................................................................................................7
3.2. 12Vcc Power Input.................................................................................................................................................8
3.3. Audio Connections................................................................................................................................................8
4. REAR PANEL FUNCTIONS.........................................................................................9
4.1. Mixer Controls.........................................................................................................................................................9
4.2. Digital Media Player Control Panel...............................................................................................................12
4.3. Using USB drives and SD-Cards.....................................................................................................................13
4.4. Remote Control ....................................................................................................................................................14
4.5. Using the Bluetooth™ Connection................................................................................................................14
5. DUAL VHF WIRELESS MICROPHONE ....................................................................15
6. RECHARGEABLE BATTERY ......................................................................................16
6.1. Battery Replacement...........................................................................................................................................17
6.2. Charging the Battery ..........................................................................................................................................17
6.3. Battery safety and disposal instructions .....................................................................................................18
7. SPECIFICATIONS ......................................................................................................20
8. WARRANTY AND SERVICE .....................................................................................21
9. WARNING.................................................................................................................22

4
ENGLISH
IMPORTANT SAFETY SYMBOLS
The symbol is used to indicate that some hazardous live terminals are
involved within this apparatus, even under the normal operating con-
ditions, which may be sucient to constitute the risk of electric shock
or death.
The symbol is used in the service documentation to indicate that spe-
cic component shall be replaced only by the component specied in
that documentation for safety reasons.
Protective grounding terminal
Alternating current/voltage
Hazardous live terminal
Denotes the apparatus is turned on
Denotes the apparatus is turned o
WARNING: Describes precautions that should be observed to prevent the danger
of injury or death to the operator.
CAUTION: Describes precautions that should be observed to prevent danger of
the apparatus.
IMPORTANT SAFETY INSTRUCTIONS
fRead these instructions
fKeep these instructions
fHeed all warning
fFollow all instructions
Water and Moisture
The apparatus should be protected from moisture and rain and can not be used near
water; for example near a bathtub, a kitchen sink, a swimming pool, etc.
Heat
The apparatus should be located away from heat sources such as radiators, stoves or
other appliances that produce heat.
Ventilation
Do not block areas of ventilation opening. Failure to do could result in re. Always

5
ENGLISH
install according to the manufacturer's instructions.
Object and Liquid Entry
Objects do not fall into and liquids are not spilled into the inside of the apparatus for
safety.
Power Cord and Plug
Protect the power cord from being walked on or pinched particularly at plugs, conve-
nience receptacles, and the point where they exit from the apparatus. Do not defeat
the safety purpose of the polarized or grounding-type plug. A polarized plug has two
poles; a grounding-type plug has two poles and a third grounding terminal. The third
prong is provided for your safety. If the provided plug does not t into your outlet, refer
to an electrician for replacement.
Power Supply
The apparatus should be connected to the power supply only of the type as marked on
the apparatus or described in the manual. Failure to do could result in damage to the
product and possibly the user. Unplug this apparatus during lightning storms or when
unused for long periods of time.
Fuse
To prevent the risk of re and damaging the unit, please use only of the recommend-
ed fuse type as described in the manual. Before replacing the fuse, make sure the unit
turned o and disconnected from the AC outlet.
Electrical Connection
Improper electrical wiring may invalidate the product warranty.
Cleaning
Clean only with a dry cloth. Do not use any solvents such as benzol or alcohol.
Servicing
Do not implement any servicing other than those means described in the manual. Refer
all servicing to qualied service personnel only. Only use accessories/attachments or
parts recommended by the manufacturer.
WARNING: Please remember the high sound pressure do not only temporar-
ily damage your sense of hearing, but can also cause permanent damage. Be
careful to select a suitable volume.

6
ENGLISH
GO-SOUND AMW series User manual
1. BEFORE YOU START
1.1. Unpacking
Thank you for purchasing GO-SOUND AMW Series portable PA systems. Each unit has
been well tested and shipped in perfect operating conditions. Carefully unpack the car-
ton and check the contents to ensure that all parts are present and in good conditions:
f1 Loudspeaker
f2 Handheld Wireless Microphones
f1 Remote Control
f1 Power Cable
fThis User manual
If anything damaged during transport, notify the shipper immediately and keep pack-
ing material for inspection. Again, please save its carton and all packing materials. If the
unit must be returned to the manufacturer, it is important that the unit is returned in
the original manufacturer’s packing. Please do not take any action without rst contact-
ing us.
1.2. Getting Started
GO-SOUND AMW Series portable PA systems are part of a wider range of SOUNDSA-
TION Pro Audio product line. These active speakers are compact, light weight and very
easy to use. They are ideal for any live music purpose. Make sure there is enough space
around the unit for proper ventilation and prevent overheating; do not place the unit
on top of hot devices such as radiators or power ampliers. The speaker is connected
to mains through the supplied cable. The product meets the required safety standards.
Blown fuses must be replaced with fuses of the same type and specication.
Make sure that all units must be properly grounded. For your safety, you
should never remove any ground connector from electrical devices or power
cables, or make them inoperative.
Our products are subject to a continuous process of further development. Therefore
modications to the technical features remain subject to change without further notice.
2. SOUNDSATION GO-SOUND AMW SERIES
GO-SOUND AMW series is the result of years of experience gathered by SOUNDSA-
TION in Portable Sound systems, a segment where quality, versatility and value for
money are absolutely essential.
The series includes four portable PA systems from 8” to 15”. This user manual is referred
to the bigger models with 12 “and 15” woofers, respectively (GO-SOUND 12AMW
and 15AMW). In addition to the MP3 player with USB, SD card and Bluetooth ™ of
the GO-SOUND MULTIMEDIA version, these two models integrate two VHF wireless

7
ENGLISH
GO-SOUND AMW series User manual
microphones with handheld transmitters, an Echo eect for the two microphone inputs
and the two wireless microphones, a useful 5-band graphic EQ and a handy trolley with
wheels and telescopic handle on top. The mains is on AC or battery operated, the latter
with a duration of about 2.5 hours at maximum volume and full charge.
The amplication is equipped with a Class-AB 800W (mains powered) peak-power
module. The polypropylene enclosure is strong and lightweight, with metallic grille,
36mm standard pole mount hole, and acoustic foam to protect the woofer and give a
pleasant look.
2.1. Main Features
fPortable 2-way active speaker with rechargeable battery.
fSturdy, compact and lightweight polypropylene casing.
fAmplicatore in classe AB da 800W*.
f12 “and 15” Woofers with 1 “compression driver.
fMP3 player with USB, SD card and Bluetooth ™.
f2 VHF wireless Microphones.
f2 Microphones Inputs.
f1 Stereo RCA Line Output
f1 Stereo RCA Line Input.
f5-band graphic Equalizer.
fRechargeable lead battery with 2.5 hours duration.
f36 mm hole for pole mounting.
fTwo handles on sides, one handle telescopic on top and trolley system.
* Peak power with connection to Mains AC.
3. CONNECTIONS
3.1. Mains Connection
Connect the device to the mains with the supplied power cable. The wire correspon-
dence is as follow:
Cable Pin International
Brown Live L
Blue Neutral N
Yellow/Green Earth
The earth must always be connected! Pay attention to the safety! Before tak-
ing into operation for the rst time, the installation has to be approved by an
expert.

8
ENGLISH
GO-SOUND AMW series User manual
3.2. 12Vcc Power Input
These GO-SOUND AMW Series speakers can be powered by a 12VDC power source
(such as the battery of an automobile). Be sure to use cables with appropriate conduc-
tor section (1.50 mm2minimum) to avoid overheating.
Be sure to observe the correct polarity: the positive pole is red; the negative is black.
Before taking into operation for the rst time, the installation has to be
approved by an expert.
3.3. Audio Connections
You will need several cables for the various connections TO and FROM the speaker. See
the pictures below that show the internal wiring of these cables. Be sure to use only
high quality cables.
Use commercial RCA cables to wire stereo unbalanced sources with RCA output con-
nectors to stereo RCA Line inputs of GO-SOUND AMW units.
Center
Signal
Body
Ground / Shield
Use mono jacks to connect the wired microphones to the speaker..
Unbalanced use of 1/4” jack TS connector
Strain relief
clamp
Sleeve
Tip
Sleeve
Ground shield
Tip
Signal

9
ENGLISH
GO-SOUND AMW series User manual
4. REAR PANEL FUNCTIONS
GO-SOUND AMW Series active loudspeakers have several connectors, controls, and
indicators the use of which you should understand.
4.1. Mixer Controls
0001:Song_Title_
ALL 00:01
U
8
1
2
6
3
4
4
5
7
9
10
11
12
13
14
15
16
17
1) IEC Socket with Fuse holder
Plug the line-cord into an AC socket properly congured for your particular model. In
case of fuse burn, to prevent the risk of re and damaging the unit, please use only a
spare of the recommended fuse type as described in the “7. SPECIFICATIONS” on page

10
ENGLISH
GO-SOUND AMW series User manual
20. Before replacing the fuse, make sure the unit turned o and disconnected from
the AC outlet.
NOTE: In the event of loss or damage to the power cord, always use a three-
pin plug with a grounding pin.
2) POWER Switch
Switch left to turn the speaker on, and switch right to turn it o. Make sure MASTER
LEVEL control is down before you turn it on.
3) ANTENNAS A AND B
They receive the RF signal from the transmitters. To increase the reception capacity,
extend the telescopic antennas as much as possible.
4) 12v power input and Fuse
As already anticipated in paragraph “3.2. 12Vcc Power Input” on page 8, GO-SOUND
AMW Series speakers can be powered by a 12VDC power source (such as the battery
of an automobile). These terminals are used to connect the unit to the external source.
Be sure to use cables with appropriate conductor section (1.50 mm2minimum) to avoid
overheating. Be even sure to observe the correct polarity: the positive pole is red; the
negative is black.
In case of fuse burn, to prevent the risk of re and damaging the unit, please use only a
spare of the recommended fuse type as described in the “7. SPECIFICATIONS” on page
20.
WARNING: Before replacing the fuse, make sure the unit turned o and dis-
connected from the AC outlet or any 12VDC external source.
5) DOUBLE VHF RECEIVER FOR WIRELESS MICROPHONES
These portable PA systems feature two handheld wireless microphones for maximum
mobility during your performances. The dual receiver has a VHF ON/OFF switch with
POWER LED, to activate the unit and indicate it is on.
TIP: When you don’t use the two wireless microphones, it is always advisable
to turn the receiver o, so as to lengthen the battery life.
The section is also composed of two level controls, one for each of the two micro-
phones, and two RF LED indicators, which light up when there is the radio signal from
the handheld transmitter. For further details on the handheld microphone, see “5. DUAL
VHF WIRELESS MICROPHONE” on page 15.
6) MIC IN1/Mic IN2
There are two 1/4 “(6.3mm) jack inputs that accept unbalanced microphone level sig-
nals. There is no phantom power, so you need to use dynamic microphones, or con-
denser if the microphones have their own battery power.

11
ENGLISH
GO-SOUND AMW series User manual
7) LINE In
There is a stereo RCA that accept unbalanced line-level signals.
8) MIC LEVEL
This controls the overall signal level at MIC IN1 and MIC IN2 inputs.
9) Line Level
This controls the general level of the signal at the RCA inputs (LINE IN).
10) ECHO
It adjust the Echo level on MIC IN 1 and 2 and to VHF MIC1 e 2. It has no eect on LINE
input and MP3 player.
11) Digital MEDIA player
This panel controls all functions related to the multi-player and hosts the Bluetooth™
receiver as well as USB and SD-Card slots. For further information about how to use it,
see “4.2. Digital Media Player Control Panel” on page 12.
12) MEDIA PLAYER LEVEL
This controls the overall signal level of the Digital Media Player (MP3/Bluetooth™/SD-
Card).
13) Master LEVEL
This controls the overall level of the speaker.
NOTE: It doesn’t aect the MIX OUT level.
14) MIX Out
It is a stereo RCA output with unbalanced line-level signals. It contains the mix of all
inputs and all controls. It can be used for recording purposes or simply to connect the
GO-SOUND AMW PA system to a mixer o any other audio system. This output is not
controlled by MASTER LEVEL.
15) POWER and CLIP LED
When the power cord is connected to the AC power connector and the power switch is
in the ON position, the POWER indicator lights (GREEN LED).
The CLIP indicator (RED LED) only lights up when the input signals are too high and the
limiter works to prevent unwanted damage to the amplier or transducers.
NOTE: to better adjust the levels and to prevent the limiter from operating
and consequently cutting the signals, once the desired sound source is con-
nected, slowly increase the levels 8, 9, 12 and MASTER LEVEL (13) until the
desired volume is reached taking care, the CLIP indicator lights up occasion-
ally. Always protect your hearing if you are near when the loudspeaker rings
at high volume

12
ENGLISH
GO-SOUND AMW series User manual
16) 5-Band Graphic EQ
This EQ optimizes the overall frequency response in order to better adapt the speaker
to the environment in which it is used. It operates on 5-bands (100Hz, 330Hz, 1KHz,
3,3KHz, 10KHz) and with a gain/reduction of +/- 12dB.
17) Battery Level Status
When you connect the power cable, you can check battery charge (even without
switching the unit on) basing on how many of the four LEDs are on. When charge level
is below 25%, the red LED ashes and indicates that you need to re-charge the battery
as soon as possible. For further details battery and charge function, please refer to “6.
RECHARGEABLE BATTERY” on page 16.
4.2. Digital Media Player Control Panel
GO-SOUND 12AMW and 15AMW feature a multimedia player that allows you to use
these speakers even without audio sources or cables: just connect your smartphone or
tablet via Bluetooth™ and that’s it. There is also a slot for SD-Cards and a USB plug to
connect your devices.
The reader accepts audio streaming in any format via Bluetooth™. In the case of SD-
Cards and USB devices, it plays audio les in MP3 (up to 320kbps) and WAV (44.1kHz
- 16bit).
0001:Song_Title_
ALL 00:01
U
1
2
3
4
5678910
1. USB Type-A plug: lets you to read USB drives in MS-DOS®format
2. SD-Card slot: allows you to read SD-Cards in MS-DOS®format
3. 2x16 character alphanumeric LCD display
4. Remote control sensor: allows the speaker to be controlled by the supplied remote
control. Fur details see “4.4. Remote Control” on page 14.

13
ENGLISH
GO-SOUND AMW series User manual
5. MODE button: by pressing repeatedly, it switches among Bluetooth™ mode, USB/
SD mode and OFF (player and display o).
6. Button (Play / Pause): plays audio of the selected device
7. (Stop): puts in stop playback
8. Button (Repeat): by pressing repeatedly, it allows you to browse through
dierent play modes (valid only when using USB drives and SD-Cards):
• ONE: Loop playback of the current song
• FOLDER: Repeated playback of all songs in the current folder in ascending order;
• ALL: Loop playback of all songs in all folders in ascending order
• RANDOM: Random playback of any song in any folder
9. Button (Rewind): Press to go back one track; holding down for one second
allows you to rewind to the beginning of current track
10. Button (Fast Forward): Press to move to next track; holding down for one
second lets you skip to the end of current track
4.3. Using USB drives and SD-Cards
When you insert a USB drive into the outlet, the player reads the content automati-
cally and plays the rst track in ascending order, in “ALL” mode (or last mode used, if
changed). The display shows on the upper-left corner the status of the player, that is
play , stop or pause ; than it shows the letter “U”, indicating that you are playing
an audio le from the connected USB device. In the case of SD-Card, the player displays
the letter S.
Next to the U or S, the display shows the current playback mode (in this case ALL).
Then there is the time code of the current playing track. At the second line there are -
from left to right - the song number in the current folder and its title.
NOTE: In the case of use of a USB drive and an SD-Card simultaneously, the
reader will play the tracks on both devices, organizing them according to the
executing mode chosen (normal, cyclical, random, etc.).

14
ENGLISH
GO-SOUND AMW series User manual
4.4. Remote Control
The MP3 player of the GO-SOUND 12 & 15 AMW systems comes with a remote control
to operate within a radius of about 5 m (without obstacles) all main functions.
Turns the MP3 player on/o.
Stops the song.
It mutes playback. When active, the song continues
to play.
It allows you to enter in the individual menus (blue-
tooth, USB/SD and OFF.
By repeatedly pressing, it switches from normal
play mode, current track loop (ONE), and all tracks
loop (ALL).
By repeatedly pressing, it switches among dierent
equalization curves.
They skip to the next or previous song.
Play or pause the rst song in the list or the last
played track. If pressed again, it resumes playback
from the same point.
Increase or decrease the volume. Not available on
this model.
0 - 9 They recall the song corresponding to the same
position in the list.
4.5. Using the Bluetooth™ Connection
To play music from your Bluetooth™ device you must rst pair it.
Pairing
Press MODE key until the “BLUE” does not appear in the top-left side of the display:
At this point turn on the Bluetooth™ mode on your smartphone or tablet. A device
called “Bluetooth” will be shown among the various available devices. Select it and start
the pairing process. Once nished, your play list will be directly played on your Go-
Sound 12AM or 15AM.

15
ENGLISH
GO-SOUND AMW series User manual
NOTE: GO-SOUND player control panel also acts on your Bluetooth™ device;
so that, for example, by pressing the button , you play / pause the song;
pressing , you skip to the next track, and so on. The buttons (Stop)
and (Repeat), however, are deliberately disabled and can be managed
only by the Bluetooth™ device.
5. DUAL VHF WIRELESS MICROPHONE
As anticipated in the previous pages, these portable PA systems have two portable
wireless microphones. Below are the main features to better understand how they work.
1. GRILL:
It protects the microphone
capsule. Do not remove this cap
to prevent damage to internal
components.
2. LED:
This LED lights up briey when
you turn on the microphone.
Under normal operating
conditions (switch 2 in MUTE
or ON position) and batteries
in normal conditions, this LED
does not light. It ashes when
batteries charge level is low and
they must be replaced.
3. ON/OFF SWITCH:
It has 3 positions: when it’s all
down, transmitter is OFF. When
it is in central position (MUTE),
the transmitter is on but audio
is disabled; nally, when it’s
all up (ON), the transmitter is
working and the audio is active.
ON
OFF
BATT
2X1.5V-AA TYPE
1
2
3
4
5

16
ENGLISH
GO-SOUND AMW series User manual
NOTE: Standby central position allows the unit to transmit without audio.
This option is important to prevent interference in the receiver due to the
absence of a radio transmitting signal. It is, therefore, suggested to ALWAYS
use this MUTE position when you temporarily don’t sing or play but the
wireless microphone is connected to an audio system (e.g. during a pause in
a show). You can move the switch to OFF position (all down) only when you
are sure that the sound system volume is low.
4 BATTERY SLOT:
Batteries are housed inside the transmitter. Use 2x 1.5V AA type batteries (not includ-
ed), paying attention to their polarity.
5 BATTERY COVER:
For battery replacement follow the instructions below:
fApply a slight pressure at the top of the door (5) and pull down. Remove the cover.
fInsert or replace the batteries in the compartment, observing the +/- polarity marked
on the bottom.
fReplace the cover on the bottom of the battery slot.
fPush up the cover of the microphone in order to completely close it.
6. RECHARGEABLE BATTERY
These PA systems work with both AC or battery power. They feature a 12V - 7AH lead
rechargeable battery, housed inside the unit and accessible through the door on back
side of the unit.
Rimuover these
four screws
Note: If you power the unit with the external cable for an extended period,
you should remove the battery for longer life.

17
ENGLISH
GO-SOUND AMW series User manual
6.1. Battery Replacement
WARNING: This operation must be performed by professional personnel.
Please contact your local dealer or contact the SOUNDSATION after-sales
service
To remove or replace the battery, follow the instructions below:
• Turn o the unit, unplug the mains cable and/or the connection to a 12VDC exter-
nal power source.
• Unscrew the 4 screws shown in the previous picture and remove the plastic cover.
• Pull out the battery and disconnect the two wires paying attention to colors (red
for positive, black for negative).
• Replace the battery with a similar both in size and electrical characteristics (12V -
7AH).
NEGATIVE
POSITIVE
150mm
100mm max.
(including poles)
65mm
• Close the cover with the screws.
• Contact SOUNDSATION support service on https://www.soundsationmusic.com/
en/services/support in case of problems.
6.2. Charging the Battery
The battery, when fully charged has a duration of about 2.5 hours of continuous use at
maximum volume.
The full charge cycle lasts about 3 hours. For the rst charge cycle, however, it would be
better that it lasted more than 6 hours. This considerably lengthens battery life.
• Connect the unit to a power outlet through the supplied power cord. It is not nec-

18
ENGLISH
GO-SOUND AMW series User manual
essary to turn on the unit.
• The four LEDs start blinking as the level of charge increases from the rst LED
(25%) to the maximum level (100%).
• After a charging time of about 3 hours for a full charge, the LEDs stop blinking and
you can disconnect the power cable. Once reached the maximum level, however,
the charging circuit turns o, even if you leave it plugged.
• When the unit is turned on, it is possible to check the status of the charge (even
during the charging process) based on the number of LEDs lit on the 4 present.
When the red LED starts blinking and the other three LEDs are o it means that the
battery is at 20% and that it is necessary to recharge as soon as possible.
6.3. Battery safety and disposal instructions
Please follow the instructions below for safe handling of and proper disposal of us-
er-serviceable batteries.
• Do charge rechargeable batteries with the instructions and correct charging equip-
ment supplied with your SOUNDSATION product.
• Do store batteries in a cool, dry place at normal room temperature. Remove bat-
teries from devices that will be stored unused for extended periods.
• Do dispose of batteries according to the local laws and regulations of your region.
Some batteries may be recycled, and may be accepted for disposal at your local
recycling center.
• Do contact SOUNDSATION Customer Support if you have questions about the
proper handling of batteries. Batteries may present a risk of re, explosion, or
chemical burn if mistreated.
• Do not disassemble, puncture, modify, drop, throw, or cause other unnecessary
shocks to batteries.
• Do not dispose of batteries in a re or trash incinerator, or leave batteries in hot
places such as an automobile under direct sunlight.
• Do not store batteries near a stove or any other heat source.
• Do not connect batteries directly to an electrical source, such as a building outlet
or automobile power-point.
• Do not place batteries into a microwave oven, or into any other high-pressure
container.
• Do not immerse batteries in water or otherwise get them wet.
• Do not short circuit batteries; for example, do not carry loose batteries in a pocket
or purse with other metal objects, which may inadvertently cause a battery to short
circuit.
• Do not use batteries, or charge rechargeable batteries, that appear to be leaking,
discolored, rusty, deformed, emit an odor or are otherwise abnormal.
• Do not touch leaking batteries directly; wear protective material to remove the
batteries and dispose of them properly immediately.
• Do not reverse the polarity (positive and negative terminals) of batteries.

19
ENGLISH
GO-SOUND AMW series User manual
• Do not continue to charge batteries beyond the specied time.
• Do not give batteries to young children, or store batteries where children may
access them.
• Do not put batteries in the mouth. If swallowed, contact a physician or local poison
control center immediately.

20
ENGLISH
GO-SOUND AMW series User manual
7. SPECIFICATIONS
GO-SOUND 12AMW GO-SOUND 15AMW
Speaker Type Portable 2-way active speaker with rechargeable battery
Frequency response 68Hz-19KHz 60Hz-19KHz
Max.SPL 112dB* 114dB*
LF 12” 15”
HF 1” Compression Driver (1” v.c.)
Directivity (HxV) / Horn Type 90° x 40° - 60° / Asymmetric
Amp.Max.(Progarm/Peak) - Class 400 W* / 800W* - AB Class
Controls Mic1&2 level, Line level, Echo level, Bluetooth/MP3 level, Master level,
Wireless Mics On, W. Mic1 level, W. Mic2 level
5-Band Graphic EQ 100Hz, 330Hz, 1KHz, 3,3KHz, 10KHz (+/- 12dB)
Connections Mic 1&2 6.3mm TS Jack, Line In L&R RCA, Line Out L&R RCA
LED Indicators Power, Clip, Wireless Mic On, RF Mic1, RF Mic2, Battery Charge
Media player USB, SD-Card, Bluetooth™
Media player controls Stop, Play/Pause, Next track, Previous track, Mode, 2x16 LCD Display
Power Supply
Mains Power: 230VAC-50Hz
Fuse: T1A-250V
Mains Connector VDE + Fuse holder
Add. Power (no charge function): 12Vcc (No charge function)
Add. Fuse: T10A-250V
Add. Power Connector 12Vcc Push-in Spring Terminal
Rechargeable Battery: 12V-7AH Lead Battery (TC12-7.0 type)
Battery Dimension (WxHxD): 151 x 100 (poles Included) x 65 mm
Wireless Microphones
Frequencies MIC1 / MIC2: VHF 174.4MHz / 175 MHz
Frequency Response: 40Hz – 16kHz / ±3dB
Transmitter Power: 10mW
Modulation Type: FM
Battery Voltage: 3V (2x1.5V AA)
Continuous Using: 7 Hours
Hand-held Mic. Size (W/DxH): Ø33 (min) - Ø48 (max) x 265 mm
Hand-held Mic. Net Weight: 0.218 kg (including batteries)
Mechanics
Housing / Grille material: Polypropylene / 0-8mm Steel
Trolley & Handles Trolley System with 2 Handles on sides and 1 Handle telescopic on top
Pole Mount Standard D36 mm
Speaker Dimension (WxHxD) 375 x 588 x 320 mm 440 x 703 x 370 mm
Packing Dimension (WxHxD) 420 x 633 x 340 mm 485 x 745 x 400 mm
Net Weight 13,4 kg 14,0 kg
Gross Weight 15.4 kg 17.2 kg
Vales referred to the unit connected to mains.
Our products are subject to change. Modications to technical features remain subject to change without notice.