SoundDigital SD600.1D User manual

SD600.1D
OWNER´S MANUAL

Dear customer,
Congratulations on acquiring your SounDigital!
You've just purchased a product of high quality and technology. The SounDigital products are developed to assure
maximum efficiency and reliability to your sound system.
Class D Amplifiers:
The main characteristics of Class D amplifiers are: audio quality, efficiency, versatility and compact design. Here are the
advantages of these characteristics:
Audio Quality – Class D amplifiers used to have a limited response in the past and they used to have a worse
performance regarding higher frequencies than Class AB amps, despite being more efficient. Introducing new
technologies, SounDigital developed a Class D amplifier superior to the Class AB ones in efficiency and performance.
Efficiency – The SounDigital Class D amplifiers have a total efficiency (power source + output) higher than 70%,
assuring a battery consumption and a heating lower than the expected.
Versatility of uses –The flat response of all the frequencies of SounDigital amplifiers allows them to be used in all the
kinds of systems: SPL, Sound Quality, and Pancadao, meeting the needs with extreme quality.
Compact design – The high efficiency and technology allow our amplifiers to be really compact, making it easy to install
them in vehicles where you have limited space.
IMPORTANT INFO
Read this manual and follow its instructions and information carefully. It contains extremely important information to have your
amplifier working properly. If you feel the need to contact our Tech Support, you can reach our technicians through the e-
mail [e-mail] ..
We recommend the use of SounDigital original accessories for a batter performance. The crossovers, power supplies
and voltmeters offered by SounDigital follow the same quality standards as our amplifiers, assuring an excelent quality
and high power sound system to our customers.
To know our complete line of amplifiers and accessories, visit www.soundigitalusa.com .

TECHNICAL SPECS
SPECS
RMS Power @ 12.6V
Low Pass crossover
High Pass crossover
Standby current draw
Maximum current draw
Musical current draw
Net weight
Gross weight
Lenght
Width
Heigth
RMS Power @ 14.4V
Peak Music Power
Eficiency
Impedance versions
Frequency response
Input sensivity
Operating voltage
Dumping factor
60A
60A
10mm²
1.5mm²
THD
0.5V to 6V
10VDC to 16VDC
400
1 x 600WRMS
SD250.1D SD250.1D
1 x 700WRMS
1 x 7000W
95%
1Ω or 2Ω
0.01% THD+N @ 60W
5Hz a 20kHz (+/- 3dB) 0.5Kg
<0.3A
60A
30A
Variable 50Hz to 20kHz
Variable 5Hz to 1kHz
0.6Kg
123mm (4.8")
100mm (3.9")
35mm (1.4")
Minimum capacity of the battery
Recommended fuse/circuit breaker
Size of recommended power cable
Size of recommended speaker cable

GND
+12V
HIGH IN
RCA INPUT
GAIN
CROSSOVER LP
CROSSOVER HP
REMOTE
SPEAKER
OUTPUT
+
-
Warning: Never use the high in input and RCA input together. If the main unit have
RCA output, use only this ouput, if doesn´t have, use the high output.
Wiring connections

Manual SD600.1 Revisão 1.2
Protection and monitoring systems
Soundigital amplifiers are micro-controlled. You can check the diagnostic of the monitoring of the
electronic functions through the LED Installed inside of the amplifier.
It indicates a short circuit or low output impedance.
It indicates the input tension is under 10 volts.
3 Blinks
4 Blinks

SounDigital warrants the original purchaser that this product shall be free of defects in materials an
workmanship for a period of twelve (12) months from the original date of purchase. Some countries have
extended warranty in case the product is installed by an authorized dealer. This warranty is not transferrable
and applies only to the original customer from an authorized SounDigital dealer.
ŸDefect or problem caused by misuse of the product;
ŸIncorrect installation or non-conformity with the Manual;
ŸMaintenance made by unauthorized personnel;
ŸAlteration or removal of the seal/serial number;
ŸExposure to adverse conditions (weather, humidity, etc);
ŸDamage caused by fall, impact or natural depreciation, caused by transport and/or handling, risks, or
smashings;
ŸProduct was purchased more than 12 months ago.
Ÿ Component or material with manufacturing defects;
Ÿ Workmanship/service needed to repair the equipment;
Ÿ If you need service on your SounDigital amplifier, send it to SounDigital's Amplifier Repair Center through
an authorized SounDigital dealer (must be accompanied by proof of purchase);
Ÿ Any extra information you can get by contacting us at the e-mail address: [email protected];
Ÿ In case of manufacturing defect or bad quality of raw material the max compensation will be the
replacement of the product, not allowing any kind of compensation payment;
Ÿ New modifications/iterations on a product don't obligate the manufacturer to modify products formerly
produced.
Warranty covers:
LIMITED WARRANTY