Soundmatters foxL DASH a User manual

foxL DASH a Quick Start Guide
Power On/Off
1) Power On
Thank you for purchasing your
soundmatters foxL DASH a!
For features and warranty
information please visit us at:
www.soundmatters.com/
madeforkindle
Let’s get started!

To turn on or off, press
2) Connect
Your foxL DASH a comes
ready to Bluetooth pair, with
the LED flashing blue and
yellow. If it is not, hold the
power button for 5 seconds.
Hold for 5 seconds
On your Kindle Fire
HDX, open the
Settings menu and
select “Wireless &
Networks”.

In the Wireless
Settings menu,
select “Bluetooth”.

To end the phone call, press
Enable Bluetooth
connection by
selecting “On”.

319-xxxx rev a
Select “Pair a
Bluetooth Device”.

Press “Scan” and
wait a moment
while your Kindle
Fire HDX and foxL
DASH a recognize
each other.

When it appears
under “Devices”,
select the name
“soundmatters”.

That’s it!
You are connected.
Bluetooth is a registered
trademark of Bluetooth SIG, Inc.

3) Adjust volume
Press volume up or
down buttons as
desired.
4) Charging
To charge, connect the
foxL DASH a to a USB
AC power adapter or to
the USB port on a
computer using the
supplied cable.
or
Volume
Volume 
-

+

Buttons and Inputs Guide
LED Indicator (Flashes Blue for Bluetooth, White for Audio In):
Audio in
Volume +
Volume -
Power / Bluetooth
Bluetooth Pairing Mode
On and Connected
Low Battery
Battery Charging
Battery Charging Complete
Blue (0.5 sec) / Yellow (0.5 sec):
Blue or White (2 sec) / Off (3 sec):
Red (2 sec) / Off (3 sec):
Blue or White (2 sec) / Red (3 sec):
Blue or White (2sec) / Green (3sec):
USB Charger in