Integra DLB-5 User manual

Network Surround Sound Bar
DLB-5
> Before Start > Part Names > Install > Initial Setup > Playback
Advanced Setup | Firmware Update | Others
Instruction Manual

2
> Before Start > Part Names > Install > Initial Setup > Playback
Advanced Setup | Firmware Update | Others
Before Start
Contents
Before Start
What's in the box ...............................................................................................3
Part Names
Main Unit (Front Panel) .....................................................................................5
Main Unit (Rear Panel) .....................................................................................6
Remote Controller .............................................................................................7
Main Unit (Display) ............................................................................................8
Sound Bar .........................................................................................................9
Subwoofer .......................................................................................................10
Install
1. Connect the Speakers ................................................................................. 11
2. Connect the TV ...........................................................................................13
3. Connect the HDMI AV Components ............................................................14
4. Connect the Audio Components .................................................................15
5. Connect Other Cables ................................................................................16
Initial Setup
Initial Setup with Auto Start-up Wizard ............................................................17
Playback
AV Component Playback ................................................................................19
Internet Radio .................................................................................................20
Spotify .............................................................................................................22
Music Server ...................................................................................................23
USB Storage Device .......................................................................................25
AirPlay® ...........................................................................................................27
BLUETOOTH® Playback ................................................................................28
Listening to the FM Radio ...............................................................................29
Listening Modes ..............................................................................................30
Quick Menu .....................................................................................................39
Other Functions ..............................................................................................40
Advanced Setup
Setup Menu......................................................................................................41
Control Function Settings .................................................................................51
Firmware Update
Firmware Update .............................................................................................52
Others
Troubleshooting ...............................................................................................55
General Specifications ....................................................................................60
About HDMI .....................................................................................................62
License and Trademark Information ................................................................63

3
> Before Start > Part Names > Install > Initial Setup > Playback
Advanced Setup | Firmware Update | Others
What's in the box
AV Receiver (Main unit/HT-D03) (1)
Sound bar (LB-43) (1)
Subwoofer (SLW-43) (1)
Remote controller (RC-954S) (1), batteries (AAA/R03) (2)
Speaker setup microphone (1)
Indoor FM antenna (1)
Sound bar connection cable (1)
Power cords (for main unit/for subwoofer) (2)
Non-skid pads (4)

4
> Before Start > Part Names > Install > Initial Setup > Playback
Advanced Setup | Firmware Update | Others
0 The power cord must be connected only after all other cable connections are completed.
0We will not accept responsibility for damage arising from the connection of equipment
manufactured by other companies.
0Functionality may be introduced by firmware updates and service providers may cease
services, meaning that some network services and content may become unavailable in
the future. Furthermore, available services may vary depending on your area of
residence.
0Specifications and appearance are subject to change without prior notice.
0Quick Start Guide (1)
＊This document is an online instruction manual. It is not included as an accessory.

> Before Start >PartNames > Install > Initial Setup > Playback
Advanced Setup | Firmware Update | Others
5
Part Names
Main Unit (Front Panel)
1. ÍOn/Standby button: Turns the unit on or into standby mode.
2. Hybrid Standby indicator: Lights if the unit enters standby mode when the features are
enabled that continue to work when this unit is in standby, such as HDMI Standby
Through (ÄP46) and Network Standby (ÄP50).
3. Display (ÄP8)
4. Remote control sensor
5. Volume dial: Allows you to adjust the volume.
6. USB port: A USB storage device is connected so that music files stored in it can be
played. You can also supply power (maximum 5 V/1 A) to USB devices with a USB cable.
7. Phones jack: Stereo headphones with a mini plug (φ3.5 mm) are connected.
8. Input button: Switches the input to be played. (BD/DVD / CBL/SAT / GAME / STRM BOX /
CD / TV / FM / NET / USB / BLUETOOTH)
9. Listening Mode button: Allows you to select the listening mode. (ÄP30)
10. Tuning43buttons: Select the frequency of FM radio stations.
  
    


6
> Before Start >PartNames > Install > Initial Setup > Playback
Advanced Setup | Firmware Update | Others
Main Unit (Rear Panel)
1. TUNER FM 75Ω jack: Connect the supplied antenna.
2. Wireless antenna: Raise for Wi-Fi connection or when using a BLUETOOTH enabled
device. The diagram shows the movable range for the wireless antenna. Do not try to
force it beyond this range otherwise you may break it.
3. AUDIO IN jacks: Input AV component audio signals with an analog audio cable.
4. DIGITAL IN OPTICAL jack: Input digital audio signals from a TV, for example, with a digital
optical cable.
5. IR IN port: Allows you to connect a multiroom remote control kit.
6. SETUP MIC jack: The supplied speaker setup microphone is connected.
7. AC INLET: The supplied power cord is connected.
8. ETHERNET port: Connect to the network with an Ethernet cable.
9. HDMI OUT jack: Connect a HDMI cable to transfer video signals and audio signals to a
TV.
10. HDMI IN jacks: Input video signals and audio signals with a HDMI cable connected to an
AV component.
11. SPEAKERS terminal: Connect the included sound bar using the included sound bar
connection cable.
12. SUBWOOFER PRE OUT jack: Connect a powered subwoofer with a subwoofer cable.
180°
90°

 










> Before Start >PartNames > Install > Initial Setup > Playback
Advanced Setup | Firmware Update | Others
7
Remote Controller
1. Í button: Turns the unit on or into standby mode.
2. Input selector buttons: Switches the input to be played.
3. Q (Quick Menu) button: You can perform common settings on the TV screen. (ÄP39)
4. Cursors, Enter button: Select the item with the cursors and press Enter to confirm.
5. button: Displays the Setup menu.
( Ä P41)
6. Volume buttons: Allows you to adjust the volume. This button also cancels the muting.
7. button: Temporarily mutes audio. Press again to cancel muting.
8. Listening mode buttons: Allows you to select the listening mode. (ÄP30)
9. Play buttons: You can start play of the Music Server or USB.
10. button: You can start repeat or random play of the Music Server or USB.
Clear button: Deletes all characters you have entered when entering text on the TV
screen.
11. Dialog button: Switches the Dialog Enhancement setting. ( Ä P39)
12. Dimmer button: You can adjust the brightness of the display in three steps. It cannot be
turned off completely.
13. button: Switches the information on the display.
14. button: Returns the display to the previous state during setting.
15. Mode button: Switches tuning to an FM station between automatic tuning and manual
tuning.
16. Memory button: Used to register FM radio stations.
















30°
30°
Approx.5 m
(16 ft.)

8
> Before Start >PartNames > Install > Initial Setup > Playback
Advanced Setup | Firmware Update | Others
Main Unit (Display)
1. Lights in the following conditions.
HDMI: HDMI signals are input and selected.
ARC: Audio signals from the ARC compatible TV are input and selected.
USB: When "USB" is selected with the input selector and the unit is connected by USB
and the USB device is selected. Flashes if the USB is not properly connected.
NET: When "NET" is selected with the input selector and the unit is connected to the
network. It will flash if the connection to the network is not correct.
DIGITAL: Digital signals are input and the digital input selector is selected.
2. Lights when operating the "NET" or "USB" input selector indicating remote controller
cursor operations are possible in screens showing list of tracks, for example.
3. Lights when headphones are connected.
4. Lights when operating the "NET" or "USB" input selector when tracks are played or
paused.
5. Lights according to the type of input digital audio signals and the listening mode.
6. Lights in the following conditions.
AUTO: When tuning mode is auto.
TUNED: Receiving FM radio.
FM STEREO: Receiving FM stereo.
SLEEP: Sleep timer has been set.
ASb: When Auto Standby function is enabled. (ÄP49)
7. Flashes when muting is on.
8. Displays various information of the input signals. Characters that cannot be displayed on
this unit are replaced with asterisks ( ＊).





 

> Before Start >PartNames > Install > Initial Setup > Playback
Advanced Setup | Firmware Update | Others
9
Sound Bar
1. Height left speaker
2. Height right speaker
3. Front left speaker
4. Center speaker
5. Front right speaker
6. Speaker jacks: Connect to the main unit using the included sound bar connection cable.
7. Holes for attaching to the wall: The sound bar can be attached to the wall by putting these
holes on wood screws, etc., that are fixed to the wall. The holes for attaching to the wall
are on the rear of the sound bar, in two places 580 mm (22-7/8") apart.
0The wood screws, etc., to fit the brackets to the wall are not included. Consult with a
professional to make sure you select the type, material, length, etc., that will provide
sufficient support. Add a reinforcing plate or anchor if reinforcement is necessary.
0We accept no responsibility for damage or injury that arises due to incorrect fitting,
incomplete fitting, incorrect use, or acts of nature.
  
 
10 mm (3/8")
5 mm (3/16")



10
> Before Start >PartNames > Install > Initial Setup > Playback
Advanced Setup | Firmware Update | Others
Subwoofer
1. LINK LED: Lights when paired with the main unit.
2. LINK button: Used to pair the subwoofer and the main unit.
3. AC INLET: The supplied power cord is connected.
The wireless connection setting between the subwoofer and the main unit was completed at
the time of shipping. You need only connect the power cord to start using the unit.
0If LINK LED is flashing and you do not hear sound from the subwoofer, go to
"Troubleshooting" and check "The subwoofer produces no sound" (ÄP56).


