Southco AV Series User manual

• Enhances the user experience combining, smooth intuitive
operation with secure holding
• Precise operating efforts with no adjustment or maintenance
• Integrated wire management for a clean look
The Southco Dynamic Mounting Arm

Dimensions in millimeters (inch) unless otherwise stated
Wire channel in open position
50 (1.96)
100 (3.9)
115 (4.52)
75 (2.95)
100
(3.9)
75
(2.95)
215
(8.46) 245
(9.64)
49.9 (1.96)
1800
Swivel 1800
Tilt ±200
Force to move arm
21 (.83)
L
R
e
v
e
r
s
e
F
o
r
w
a
r
d
• Intuitive grab and
move operation enhances
the user experience
No knobs or tools required to
reposition the display
Precise control of operating
effort ensures ideal “feel”
and eliminates “drift”
Holds securely, even in
applications with dynamic
loading
• Low profile in the
stowed position
Folds to within 50 mm of
the wall
• Snap-open channels
simplify wire management
Easy display installation
and replacement
• Factory assembled and
ready for use
AV Series Dynamic Mounting Arm
Tilt, Swivel and Swing
www.southco.com/AV
Product Detail
VESA MIS-D, 100, C

Dimensions in millimeters (inch) unless otherwise stated
AV - D30 - K A S - F
Step 1
Determine display weight and distance (d) from
mounting surface to center of gravity.
Step 2
Use chart below to select model (101 or 102).
Step 3
Complete part number by selecting length and color
options below.
Display Weight
Center of
Gravity
d
Display Mass kg (lbf)
AV Series Dynamic Mounting Arm
Tilt, Swivel and Swing
www.southco.com/AV
• Smooth operation
enhances the user
experience
• Adjust the display without
knobs or tools
• Holds securely in every
position
Material and Finish
Aluminum alloy, powder coated
Performance Details
Cycle performance: 20,000 cycles
within ± 20% of static torque
specification
Max. dynamic working load:
Model 101: 66N (15 lbf)
Model 102: 98N (22 lbf)
Average ultimate load: See table
Part Number
See table
Part Number Example
AV-D30-25A101-50 = Dynamic
mounting arm, Model 101, 250mm
Length, black
Specification and Selection
3 (6.6)
3.5 (7.7)
4 (8.8)
4.5 (9.9)
5 (11)
5.5 (12.1)
6 (13.2)
6.5 (14.3)
7 (15.4)
7.5 (16.5)
8 (17.6)
8.5 (18.7)
9 (9.8)
9.5 (20.9)
10 (22.1)
10.5 (23.2)
11 (24.3)
20 (7.87)
18 (7.09)
16 (6.30)
14 (5.51)
12 (4.72)
10 (3.94)
8 (3.15)
6 (2.36)
4 (1.57)
2 (0.79)
0.0
Display mounting surface to CG distance cm (in)
K Length (L) Average ultimate
load N (lbf)
15 150 (5.9) 1780 (400)
25 250 (9.8) 1560 (350)
35 350 (13.8) 1000 (225)
45 450 (17.7) 890 (200)
F Color
50 Black
76 White
Model S
Force to
move arm
N (lb)
Tilt Torque
N•m (in lbf) Swivel
Torque
Reverse Forward
101 22.2 (5) 7.9 (70) 1.13 (10) 2.3 (20)
102 33.8 (7.6) 15.4 (136) 2.26 (20) 3.4 (30)
Model 102
Model 101

Southco© AV ARM NA 10-09
Dimensions in millimeters (inch) unless otherwise stated
Installation
1. Determine desired mounting location
2. Mark upper and lower mounting holes. For ideal hole location, mark upper hole first, then
use a plumb line to ensure vertical orientation between the upper and lower holes
a. For thru-bolt installation, drill or punch holes as indicated on trade drawing and install using
1/4-20 or M6 screws.
b. For installation in wood studs, drill a 3/16 inch pilot hole and install using a 1/4 inch lag bolt.
Do not over tighten.
c. For compliant mounting surfaces (gypsum board, etc.) use optional wall plate, sold separately.
Caution: Because of the wide variety of available wall materials, it is the installer’s responsibility to ensure
that the materials, and structure to which the arm is mounted, and the hardware selected will provide
adequate support.
3. Slide on mounting hardware covers and attach display using manufacturer’s recommended hardware.
4. Route wiring as needed
215 (8.48)
Screws M6 or 1/4 X 2
Optional Wall Plate
Part number AV-D30-X101- F
• Smooth operation
enhances the user
experience
• Adjust the display without
knobs or tools
• Holds securely in every
position
AV Series Dynamic Mounting Arm
Tilt, Swivel and Swing
Global Corporate Headquarters and Americas Customer Service & Technical Support Center
Concordville, PA – USA · Tel: [phone] · Fax: [phone]
www.southco.com/AV
For complete installation and operation instructions please consult the product manual included in every package or available
to download from www.southco.com
1
3
2
4