Space Pole U-Frame User manual

Landscape
Mode
Portrait
Mode
Medium/Large Tablets Small Tablets
Medium/Large Tablets Small Tablets
MK15-0318 version 0.2 07/2021
SpacePole
U-Frame
Installation Guide

~2.5mm
2x
10mm M4
Buon Cap screw
4x
6mm M3
Hex Socket screw
1 x 2,5mm Allen Key
1x
90mm M4
Pan Head screw
WORD OF CAUTION
Make sure the Tablet is fully pressed
up against the backside
Risk of recoil
Risk of damage to hardware
DuraTilt Installaon
Portrait / Landscape
Use Buon Cap screws
1
Fixings
40 x 40 mm Installaon
Portrait / Landscape
Use Hex Socket screws
Screw in approx. 2,5mm
2a Slide U-Frame into place
Tighten fully using Allen Key
2c
CAUTION!
Do not mount Tablet before securing
U-Frame soluon rmly
If security screw is used, rst
screw 90mm Pan screw into
socket approx. 5-10mm
4a
Insert Tablet - See step 3
4b
It is not recommened to ghten
security screw more than 0.5N m
to elimnate risk of hardware damage
When fully inserted,
ghten screw (0.5N m)
4c
Insert Tablet by leveraging in
and push up against spring.
Keep both hands rmly on the
tablet at all mes
3a Lower Tablet under control
Do NOT just let go!
3b
Insert U-Frame on screws
Larger keyhole rst
2b