Space Pole Atdec SafeGuard User manual

Securing the iPad to the MultiGrip™
Install selected Mounting Option before securing the iPad
4
A
Place iPad above the
MultiGrip™ (1). Gently
press the iPad in place.
If power cable is needed
insert it before placing
iPad in place!
B
Place the SafeGuard
Frame (2), from top.
Align the holes for the
tamper proof screws (5).
C
Using the tool (6),
secure the SafeGuard
Frame with tamper proof
screws (5), in four points.
D
The iPad is now secured
and ready to be used.
iPad SafeGuard Frames
Installation Instructions
®

snoitpOgnitnuoMtnetnoCxoB
2 3
(5) M4/6 tamper-proof screws (x 4)
(6) 2,5mm Allen key with hole for pin (x 1)
(4) M4/4 machine screws with cross recess (x 4)
(3) M4/5 counter-sink screws with hex recess (x 2)
(1)
MultiGrip™ plate for iPad, multiple
mounting options DuraTilt®mounting
Uses two screws (3) to attach the
MultiGrip™ (1) to a DuraTilt™
connection.
Tool (6) is included for use.
VESA mounting
Uses four screws (4) to
attach the MultiGrip™ (1) to a
VESA 75 monitor plate. Tool is
not included. Use a Phillips head
screw-driver. VESA 100
mounting also possible.
Wall mounting
Uses four self-tapper screws to
attach the MultiGrip™ (1) to a
wall/desk. Tool/screws are not
included.
Maximum diameter for the
screws: Ø5mm.
SafeGuard Frame
(2)