Spanarci Zeta 2000 User manual

材质：105g铜版纸

尺寸：215 x95 mm

印刷：单黑

装订：骑马钉

注：封面封底背面不印刷

ZETA 2000

JUMP STARTER

Read this manual carefully before use and keep it for future reference

User Manual

Contents

1. PRODUCT OVERVIEW

2. PACKAGE CONTENTS

3. HOW TO USE

4. SPECIFICATIONS

5. HOW TO CHARGE THE ZETA2000

6. FAQ

7. TOXIC AND HAZARDOUS SUBSTANCES

8. TROUBLESHOOTING

9. SAFETY INSTRUCTIONS

10. WARNING

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

- 01 -

1. PRODUCT OVERVIEW

Thank you for choosing Spanarci.

Thank you for purchasing Spanarci Jump Starter. It is a portable power bank with USB quick charge.

Display Screen

USB-C Port (IN/OUT)

LED: Toggles the LED light through 4 light

modes: 50%-100%-SOS-Strobe

USB-A Port (OUT)

LED Button: Press 2s to turn the unit "ON"&"OFF"

Power Button: Press 2s to turn the unit "ON"&"OFF"

12V Smart Jumper Socket

- 02 -

2. PACKAGE CONTENTS 3. HOW TO USE

- 03 -

Start the car engine.

Connect the jump clamps with the car battery

correctly.

01 02

0403

The green indicator light on

Connect the jumper cables with the ZETA 2000

jump starter.

START

STOP

ZETA 2000 ×1 12V Booster Clamps ×1 USB-C TO C Cable ×1

USB-A TO C Cable ×1 User Manual ×1 Warranty Card ×1

Warranty Card

- 04 -

DISPLAY SCREEN DESCRIPTION

USB-C input voltage.

Battery power percentage.

30W fast input or output.

USB-A or USB-C output voltage.

5. “START” in green, the device is ready to start your car.

“START” in yellow, the voltage of car battery is too low, press the and

together to use the boost function, then jump start your car when the “START”

in green.

“START” in red, the positive and negative is connected reversely between

the jump clamps and car battery, please reconnect it correctly.

HOW TO USE THE BOOST FUNCTION

ZETA 2000 is designed to jump start 12-Volt lead-acid batteries, the “START”

will be in yellow if the voltage of the car battery is too low. You can press the

power button and the light button at the same time for 3s to activate the

BOOST FUNCTION.

WARNING: Disable safety protection and manually forces "BOOST

FUNCTION", only for use when a battery voltage is too low to be detected.

4. SPECIFICATIONS

- 05 -

Specifications

212*92*45

Lithium Ion

2000A

44.4Wh

PD30W (5V 3A, 9V 3A, 12V 2.5A, 15V 2A, 20V 1.5A) / 5V 1A / 5V 2A

QC3.0 (5V 3A; 9V 2A; 12V 1.5A) / 5V 1A / 5V 2A

14°F to 140°F

32°F to 113°F

-4°F to 122°F

Items

L × W × H (mm)

Internal Battery

Peak current

Battery Capacity

Input USB-C

Output USB-C

Output USB-A

Working Temperature

Charging Temperature

Storage Temperature

Performance index

Dimensions

Main Parameters

With Wall Charger

Plug the wall charger into the universal socket.

Plug the end of the wall charger into the Type-C input port of ZETA 2000.

With External Power Supply

Note：The ZETA 2000 is equipped with a PD 30W Type-C Input/Output port. It can be charged with a 5-30W wall charger. Please check the full charging time in the

following excel. It supports the maximum 30W charging power. You can choose the SPANARCI original wall charger to get the better charging experience!

Plug the Type-C cable into the Type-C Port of the device.

Plug the other end of the Type-C cable into an external power supply.

5. HOW TO CHARGE THE ZETA 2000

- 06 -

Recharge Time

10h

2.5h

1.5h

Charger Rating

10W

20W

30W

6. FAQ

- 07 -

How do I turn off ZETA 2000?

Simply press the power button to turn it off.

Note that ZETA 2000 is able to detect its own battery status and can take

steps to save power, such as going into sleep mode when the battery is

very low.

When fully charged, how long will charge remain in the battery when

ZETA 2000 is not in use?

If left in storage, the battery will hold its charge for around 2 years.

However, it's recommended that you recharge it every three months, as

this will prolong the overall lifespan of the battery.

How long does it take to recharge ZETA 2000's battery from flat?

It takes around 2.5 hours to fully charge the battery using a PD20W

charger or 1.5 hours to fully charge the battery using a PD30W charger.

What is the expected lifespan of ZETA 2000?

It could last for around five years if kept in good condition. The battery

should support around 500 recharges from 0 to 100%.

Can I use ZETA 2000 to charge my phone or tablet?

Yes, ZETA 2000 includes both standard USB and Type-C output ports. You

can charge any mobile device simply by connecting it to one of these two

ports. For high-power charging via the Type-C port, a cable that supports

fast charging will be required. For more information on output current and

voltage, see page 6.

Indicate all homogeneous materials’ hazardous substances content are below the MCV limit specified in the Standard 2002/95/EC(RoHs).

7. TOXIC AND HAZARDOUS SUBSTANCES

If the following operations can not solve your problems, please stop using the device and contact the manufacture with E-mail: [email protected]

8. TROUBLESHOOTING

- 08 -

TOXIC AND HARMFUL SUBSTANCES

Lead (Pb) Mercury (Hg) Cadmium (Cd)

Hexavalent

Chromium

(Cr (Vi))

Polybrominated

Biphenyls (PBB)

Polybrominated

Diphenyl Ethers

(PBDE)

1. Read the user manual carefully before using this device.

2. Do not use this device as a car battery charger.

3. Do not use this device as a toy.

4. Be careful to use it when there are children around to avoid injury.

9. SAFETY INSTRUCTIONS

- 09 -

Problem Solution

No response when pressing

the power button

Unit fails to jump-start

USB power port fails to power

• The voltage of the ZETA 2000 is really low and triggers the low power protection to shut down the device.

• Plug the wall charger into the ZETA 2000 to recharge it.

• Make sure the power switch is in the ON position.

• Check that jump-starter is fully charged. Recharge unit if necessary.

• Make sure a proper polarity cable connection is established.

• Make sure the USB charging port power button is in the ON position.

• Has been fully charged. Recharge unit if necessary

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

The product only works with 12V battery.

Use the clamps that come with the device. When the clamp or wire is damaged, stop using it immediately to avoid injuries caused by fire or electric shock.

Do not connect the positive and negative clamps to each other.

Before starting, make sure there is no rust or foreign matter on the interface. Connect the device with the clamp tightly to make sure the device starts properly.

Remove the clamps from the car battery within 30 seconds after successfully starting the car. Otherwise, it may cause damage.

Do not start the device more than three times in a row, and the interval between each start should be at least two minutes, otherwise the product will be overheated and

damaged.

Do not use the clamps to power other devices.

Do not place the device in an environment where the temperature exceeds 140°F.

The device shall be charged at a temperature between 32°F and 113°F.

Do not put the device in water or expose it to rain.

Do not expose the device to high temperature or fire.

Do not use the device in explosive environment with flammable liquid, gas or dust.

Make sure that someone around is available to help you when using the device.

Do not wear metal jewelry such as rings, bracelets, and necklaces while using the device.

Disconnect the jump starter and the clamp at the battery clamp plug to reduce the risk of damage to the power plug and power cord.

Do not use damaged or modified battery packs to avoid the danger of fire, explosion, and injury.

Use the original charger or a charger with the same input terminal as the jumper starter to charge.

Do not charge this device immediately after starting the car.

Do not start the car while charging the device.

The battery may leak in extreme cases. Do not touch the leaked liquid directly with your hands or skin. Rinse immediately with soap and water in case of contact. If the

leaked liquid comes into contact with your eyes, rinse your eyes with cold water for at least 10 minutes and seek medical advice immediately.

- 10 -

This product is for 12-Voltage vehicle (equipment) batteries. It may be dangerous if used with other types of batteries. Read and understand the safety instructions

before using the jump starter. Fail to follow the safety instructions may cause damage to the jump starter, and may also result in electric shock, explosions, fire,

property damage, and personal injury.

10. WARNING

- 11 -

25.

26.

At the end of the product life, lithium battery should be disposed in accordance with local regulations.

If your car battery is in low voltage(below 8V), press the power button and the LED button of the jump starter simultaneously for 3 seconds to force start your car.