Spearhead Sniper Series User manual

8999128: v1 03/09/2018
Page 1.1 of 1.12 pages Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
SNIPER 600 SHD
September 2018
8999128

8999128: v1 03/09/2018
Page 1.2 of 1.12 pages Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
Model type: Type modèle : Entwerfen Sie Typ:
SNIPER 600 SHD
Model number: Nombre modèle : Entwerfen Sie Zahl:
956225__
Serial numbers:
Numéros de série :
Seriennummern:
Machine: Machine:
Maschine:
S______
Cutting implement:
Instrument de coupe:
Schneidenwerkzeug
S______
Other: Autre: Anderer:
Name of owner:
Le nom de propriétaire :
Name des Eigentümers:
Date of delivery / installation:
La date de livraison/l'installation :
Datum der Lieferung / Installation:
IMPORTANT
At the point of transfer of ownership record the above information. Note the serial number of your machine and always quote it in any
communication with us or your dealer. (The serial number plate is located on the machine mainframe.) This is particularly important
when ordering spares. Remember to include all numbers and letters.
The information given throughout this manual is correct at the time of publication. However, in the course of constant development of
Spearhead machines, changes in specification are inevitable. Should you find the information given in this book to be at variance
with the machine in your possession, you are advised to contact the Spearhead Service department where up-to-date information will
be provided.
The manual can contain standard and optional features and is not to be used as a machine specification.
The machine has been tested and is considered safe if carefully used. Ensure your operator is properly trained in its use and
maintenance.
IMPORTANT
Au point de transfert de possession enregistre les informations ci-dessus mentionnées. Noter le numéro de série de votre machine et
mentionnez les dans toute communication avec nos services ou votre revendeur. (La plaque de numéro de série est localisée sur le
central demachine). Ceci est important pour la commande de pieces detachees. Pensez a noter tous les numeros et toutes les
letters.
Les informations donnees dans ce manuelsont correctes cependant, du fait de developpement constant des machines Spearhead.
Changements dans les caracteristiques sont inevitables. Sivous trouvez que les informations donnees ne correspondent pas a votre
machine veuillez contacter le service des reparations ou des informations plus recentes vous seront donnees.
Ce manuel peut montrer des caracteristiques optionnelles et ne peut pas etre considere comme specification de la machine. Cette
machine a ete testee, et elle est consideree comme fiable a condition d’une bonne utilisation. Assurez-vous que votre operateur est
qualifie en ce qui concerne l’utilisation de la machine ainsi que son entretien.
WICHTIG
Am Punkt der Übertragung des Eigentumsrecht zeichnet die oberen Informationen auf. Merken Sie die Seriennummer von Ihrem
maschine ein und geben sie diese immer an, wenn sie sich an uns oder ihren händler wenden. (Die Seriennummerplatte ist auf der
Maschinenzentraleinheit befunden). Das ist besonders beiersatzteilbestellungen wichtig. Vergessen sie nicht, alle zahlen und
buchstaben zu notieren.
Die angaben indiesem handbuch sind beiveröffentliching korrekt. Aufgrund der konstanten weiterentwicklung von Spearhead
maschinen sind jedochänderugden in der spezifikation unvermeidlich. Wenn die information in diesem handbuch nicht mit ihrer
maschine übereinstimmen, nehmen sie bitte kontakt mit der Spearhead kundendienstabteilung auf, die ihnen gerne die aktuellen
information zukommen lässt.
Das handbuch kann sowohl beschreibungen für die standard ausführung als auch für zubehör enthalten und ist nicht als
maschinenspezifikation zu verwended. Die maschine ist getestet und bei sachgemässem betrieb als sicher befunden worden.
Sorgen sie dafür, dass ihr bedienpersonal in anwendung und wartung richtig geschult wird.

8999128: v1 03/09/2018
Page 1.3 of 1.12 pages Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
This machine is produced by ZANON S.R.L. on behalf of
Spearhead Machinery Limited.
EC DECLARATION OF CONFORMITY
Conforming to EU Directive 2006/42/EC
We,
Of ZANON S.r.l., vIA Madonnetta, 30. 35011 Campodarsego (Padova) - Italy.
Declare with our exclusive responsibility that the interchangeable equipment to be coupled with an agricultural
tractor called:
FLAIL MULCHER SERIES TS-TWIN
MODEL
SERIAL NO
YEAR
TS-TWIN 600
To which this declaration refers, complies with the following legislative provisions and harmonised product
standards:
Directive 2006/42/EC (Machinery Safety)
In order to verify conformity, the following standardised technical specifications have been applied:
EN 349: 1993+A1:2008
EN 1037:1995+A1:2008
EN ISO 11202:2010
EN ISO 12100:2010
EN ISO 4254-12:2012
EN ISO 13849-1:2008
EN ISO 13857:2008
EN 15436-1:2008
EN ISO 13524:2009
CEN/TS 15436-3:2009
EN 15436-4:2009
EN 15436-2:2008
EN ISO 3746:2010
EN ISO 4254-1:2013
ZANON S.r.l.
Mr Franco Zanon
Signed …………………………………………
On behalf of Zanon S.r.l.
Date: / /

8999128: v1 03/09/2018
Page 1.4 of 1.12 pages Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
Sniper 600 SHD Flail Mower
This manual includes instructions for installation, use and maintenance of the Sniper 600 SHD flail mower in the
following sections.
The machine has been designed for use in the agricultural sector only, for shredding grass, the stalks of finished
crops, brush, growth on fallow land etc. The machine is drawn by the tractor by means of a three-point hitch and
works on the ground under its own weight and by virtue of rotating rotors that are driven by the tractor‘s power
take-off by means of a PTO shaft connection. Any different use should be considered improper and therefore
potentially dangerous to the safety of the operator and any exposed persons. This manual is integral to the Sniper
flail mower, defines the purpose for which it was built and contains all the information required for proper and safe
use. Regular machine operation depends on its correct use and adequate maintenance: it is advisable, therefore,
to follow these instructions carefully to prevent any situation that could compromise the machine’s operation and
durability. It is also important to follow that which is described in this manual since Spearhead declines any liability
resulting from negligence of from not observing these norms, since it would result in the warranty being annulled.
It is mandatory to verify upon delivery that the Sniper flail mower is integral and complete in all its parts. Any
complaints must presented in written within 8 (eight) days from receiving the machine. Spearhead can however be
contacted at any time for immediate and precise technical assistance and anything required for optimum operation
and maximum performance of the equipment. Upon receiving the product, carefully read the manual and carefully
follow the instructions contained in it.
IMPORTANT
All technical material or description in this manual is exclusively owned by Spearhead who prohibits
the complete or partial reproduction of the same unless written approval has been issued by the
Spearhead.
Data, illustrations and descriptions in the manual cannot be considered binding. Spearhead reserves
the right to make changes at any time that it considers to be suitable for improvement or for a
constructive or commercial requirement.
This manual reflects the state of techniques at the time of marketing the flail mower and cannot be
considered inadequate if updated at a later date due to modifications of related legal provisions.
Spearhead declines any and all liability for damages caused by the flail mower to persons,
animals or property, resulting from use other than that described in this manual, or due to
damage caused by negligence or by not observing the instructions contained in this manual.
The manualshould be carefully stored in a suitable area to guarantee its physical integrity; it should
be easy to access by anyone authorised to consult it. The manual is an important document that
should accompany the flail mower and all users should be held responsible for safeguarding it.
For additional information or clarifications regardinganything contained in this manual, or if the
manual deteriorates, is destroyed or lost, using the flail mower is prohibited and it is mandatory to
request a new manual as soon as possible exclusively through:
Spearhead Machinery Limited
Green View, Salford Priors,
Evesham, Worcestershire, WR11 8SW
Direct download via Spearhead’s online PDF manual library
http://dealerinside.spearheadmachinery.com/dealerinside/manuallibrary/default.aspx
For technical enquiries email: [e-mail] or call [phone]
For parts enquiries email: [e-mail] or call [phone]
The following manual is an integral part of the product and must be stored carefully, in order
that it keeps its integrity and can be consulted repeatedly throughout the entire life of the flail
mower.
The flail mower is manufactured to conform to the provisions contained in Directive 2006/42/EC. It is
therefore equipped with EC marking and accompanied by the following EC conformity declaration.

8999128: v1 03/09/2018
Page 1.5 of 1.12 pages Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
Contents List
1Machine Description...............................................................................................................................7
1.1 Intended Usage.........................................................................................................................7
1.1.1 Allowed Uses...............................................................................................................7
1.1.2 Improper Uses.............................................................................................................7
1.2 General Arrangement ...............................................................................................................9
1.3 Identification ............................................................................................................................11
1.4 Machine general specification.................................................................................................11
1.4.1 Flail options................................................................................................................12
1.5 Sound Level............................................................................................................................12
2Safety......................................................................................................................................................1
2.1 Level of danger..........................................................................................................................1
2.2 Terminology...............................................................................................................................1
2.3 Safety Decals............................................................................................................................2
2.4 Personal Protective Equipment ................................................................................................3
2.5 Ecology and pollution................................................................................................................3
2.5.1 Disposal.......................................................................................................................3
2.5.2 Preparation for storage................................................................................................4
2.5.3 Removing the machine from packing or longer term storage.....................................4
2.6 Safe use....................................................................................................................................4
2.7 Firefighting measures................................................................................................................5
3Machine Transportation..........................................................................................................................1
3.1 Lifting.........................................................................................................................................1
3.2 Travelling on public roads.........................................................................................................2
4Setting up the machine...........................................................................................................................1
4.1 Before setting up the machine..................................................................................................1
4.1.1 PTO shaft operation....................................................................................................1
4.1.2 Hydraulic hoses –for machine folding........................................................................1
4.1.3 Hydraulic hoses –for opening rear doors (if fitted).....................................................1
4.2 Line of sight...............................................................................................................................2
5Use of the machine.................................................................................................................................1
5.1 Connecting the machine to the tractor......................................................................................1
5.2 Starting the machine.................................................................................................................3
5.3 Commencing work....................................................................................................................4
5.4 Stopping the machine...............................................................................................................4
5.5 Uncoupling the machine ...........................................................................................................4
5.6 Clogging....................................................................................................................................4
6Machine Adjustments .............................................................................................................................1
6.1 Adjusting ground speed............................................................................................................1
6.2 Adjusting cutting height.............................................................................................................1
6.2.1 Adjusting skid height....................................................................................................1
6.2.2 Adjusting rear roller height...........................................................................................2
6.2.3 Adjusting rear wheel height (if fitted)...........................................................................2
6.3 Adjusting the counter-knives (if fitted).......................................................................................3
6.4 Adjusting belt tension................................................................................................................3
7Maintenance...........................................................................................................................................1
7.1 Maintenance work that can be performed by the operator.......................................................1
7.2 Hot points on the machine........................................................................................................2
7.3 Greasing....................................................................................................................................2
7.3.1 Greasing requirements - daily.....................................................................................3
7.3.2 Greasing requirements –every 50 hours....................................................................3
7.3.3 Greasing requirements –every 400 hours..................................................................3
7.4 Hydraulic system.......................................................................................................................3
7.4.1 Replacing a hydraulic hose.........................................................................................4
7.5 Flails ..........................................................................................................................................4
7.5.1 Inspecting for wear......................................................................................................4
7.5.2 Replacing the flails.......................................................................................................4
7.6 Drive belts..................................................................................................................................5
7.6.1 Replacing drive belts...................................................................................................5
7.7 Extraordinary maintenance.......................................................................................................6
7.8 Scheduled maintenance table ..................................................................................................7

8999128: v1 03/09/2018
Page 1.6 of 1.12 pages Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
7.9 Cleaning the machine............................................................................................................... 7
8Accessories ............................................................................................................................................ 1
8.1 List of accessories .................................................................................................................... 1
8.2 Method for requesting accessories........................................................................................... 1
9Troubleshooting...................................................................................................................................... 1
10 Spare Parts............................................................................................................................................. 1
11 Warranty Information.............................................................................................................................. 1
11.1 Warranty policy......................................................................................................................... 1
11.1.1 Warranty registration................................................................................................... 1
11.1.2 Limited warranties....................................................................................................... 1
11.1.3 Remedies and procedures.......................................................................................... 2
11.1.4 Limitation of liability ..................................................................................................... 2
11.1.5 Miscellaneous.............................................................................................................. 2
11.2 How to make a claim ................................................................................................................ 3
11.3 How to obtain the correct spare part numbers......................................................................... 3

8999128: v1 03/09/2018
Page 1.7 of 1.12 pages Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
1 Machine Description
1.1 Intended Usage
1.1.1 Allowed Uses
The machine has been designed for use in the agricultural sector only, for shredding grass, the stalks of finished
crops, brush, growth on fallow land etc.
When the flail mower works it guarantees the required level of safety even in the presence of an insignificant
malfunction of its components or hazardous operating conditions, however, always within the permitted uses.
With reference to the above, the following are considered allowed uses:
- Using the flail mower to mow crop residue.
The flail mower must not be used for purposes other than those described in this manual.
1.1.2 Improper Uses
The machine manufactured has been designed for use in the agricultural field by trained personnel and is intended
for the following operations only: shredding maize stalks, straw, chard and soy leaves, brush, grass and non-
woody stalked plants in general provided they are found on level, non-stony ground and are evenly distributed.
DANGER! Under no circumstances should the machine be used for any purpose other than the permitted uses
(given above) or in any field other than the agricultural field. More specifically, it must not be used for:
Shredding woody stalked plants, grinding wood, or for similar applications on hard materials, or
working with tools in contact with the ground. Do not use the machine on stony ground as this would
mean the tools would come into contact with stones, with the extremely hazardous result of stones
being flung off at great speed. In addition, the tools would fail mechanically straight away, with just as
serious consequences. Failure to comply with the instructions given shall result in serious safety
hazards. If in any doubt, contact the manufacturer.
Remember that the rear doors should only be opened for maintenance purposes, for instance to remove clogging,
replace broken or missing tools, remove foreign matter, etc. Before opening the doors, make sure you have
disengaged the tractor‘s PTO and that the rotors have come to a halt (bear in mind that inertia can mean the rotor takes
even a few minutes to stop once the power take-off has been disengaged). Also make sure nobody is anywhere near
the machine. Once the rear hoods have been opened, switch off the tractor and remove the keys (and keep them in a
safe place) before going near the rear of the machine or allowing other people to come near.
WARNING! Failure to follow these rules may expose people to the danger of serious harm or even death. The
hydraulic operation of the rear door can cut off people‘s limbs if they are allowed near.
While working, the parking stands must not interfere with the machine‘s proper operation: they must be turned
upside down and fastened in their relevant mounts. When work is finished, the parking stands must be returned to
their original position, resting on the ground. The PTO must be run at the required speed (540 rpm).
DANGER! Do not make sharp turns while the machine is working, making sure you always lift it when changing
direction and reversing. Do not lift the machine more than 40 cm off the ground, see Figure 1.2.

8999128: v1 03/09/2018
Page 1.8 of 1.12 pages Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
Figure 1.1 Spearhead Sniper 600 SHD
Figure 1.2

8999128: v1 03/09/2018
Page 1.9 of 1.12 pages Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
1.2 General Arrangement
With reference to Figure 1.3, The Sniper flail mower is a piece of farming equipment comprising a hard-wearing sheet
metal structure with tubular bracing to give it lasting dimensional stability.
The structure supports the A-frame for connecting the machine to the tractor and the drive assembly that incorporates a
gearbox and two belt drives to transfer power from the tractor‘s power take-off to the rotors.
The flail mower consists of the following parts:
POSITION
DESCRIPTION
1
Frame with three-point hitch
2
Three-point hitch top linkage
3
Three-point hitch lower linkage
4
Protective hood
5
Drive shafts
6
PTO guard
7
Gearbox
8
Rotor shaft
9
Flail
10
Rear roller
11
Skid
12
Machine stand
13
PTO shaft guard
14
PTO shaft coupling
15
Front safety flap
16
Hydraulic lift rams
17
Light bar for road use (optional extra)

8999128: v1 03/09/2018
Page 1.10 of 1.12 pages Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
Figure 1.3

8999128: v1 03/09/2018
Page 1.11 of 1.12 pages Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
1.3 Identification
Each flail mower is equipped with a serial plate; see Figure 1.4 that includes the following data in this order:
- EC Marking.
- Manufacturer marking.
- Name and address of the manufacturer.
- Machine Whole Goods Code (WGC).
- Machine Product Group Code.
- Serial number of the machine.
- Year of construction.
- Mass in kg.
- Model year.
Figure 1.4
Data on the manufacturer’s plate should always be referred to when requesting assistance and/or supply of spare
parts.
This data can identify the flail mower and its characteristics, certifying that it responds to current regulations. For this
reason the plate should never therefore be removed nor be used for other purposes; if the flail mower is dismantled, it
should be destroyed to prevent any form of abuse.
1.4 Machine general specification
Sniper Series (1)
600 SHD
Working Width
6000mm
HP Power Requirement
150-320
Weight
2870kg
Width
6300
Length
1600
Height
1060
Hitch To Tractor
3-point Universal
PTO Speed
540 rpm
Primary Transmission
PTO Input Shaft
Secondary Transmission
Belts
Cut Height Adjustment
Mechanical
Notes: (1) Spearhead constantly reviews and improves product designs and reserve the right to change this
information. Actual machines may vary from the above specification. Contact your Spearhead Sales
representative if you have any queries.
Supplier Information
Machine
Whole Goods
Code (WGC)
Product Group Code
Machine Serial
Number
Production Year
Weight (kg)
Model Year

8999128: v1 03/09/2018
Page 1.12 of 1.12 pages Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
1.4.1 Flail options
Single
Double with blade
Double with spacer
Cupped knife
Hammer
x144
x72+144
x72+144
x76
x76
1.5 Sound Level
The sound level emitted by the machine has been measured on a similar model with the equipment working under no-
load conditions.
Sound pressure level at driver‘s seat with cab-less tractor: LwA = 90 dB (A)
Sound power level at driver‘s seat with cab-less tractor: LpA = 95 dB (A)
Sound pressure level at driver‘s seat with cab tractor: LwA = 70 dB (A)
Sound power level at driver‘s seat with cab tractor: LpA = 75 dB (A)

8999128: v1 03/09/2018
Page 2.1 of 2.5 pages Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
2 Safety
2.1 Level of danger
The safety of the operator and exposed persons is the main concern of the designer and the manufacturer of the
machine. When designing a new machine, one tries to plan for all possible danger situations and risks connected to
using the machine, adopting the steps necessary to make the equipment as safe as possible. The number of accidents
remains very high however, especially due to incautious and awkward use of the machine. It is therefore recommended
to carefully read this manual and this section in particular, regarding safety standards, avoiding behaviour that is
inappropriate or in contrast with the instructions contained in this manual.
Pay attention to the following danger signal where contained in this manual and follow safety instructions.
DANGER! Level 1 - This signal warns that if the described operations are not carried out
properly, they will cause serious injury, death or long-term health risks.
WARNING! Level 2 - This signal warns that if the described operations are not carried out
properly, they may cause serious injury, death or long-term health risks.
CAUTION! Level 3 - This signal warns that if the describedoperations are not carried out
properly, they may cause damage to the machine.
2.2 Terminology
The indicated levels of danger refer to specific risk situation that may occur during machine use and may involve the
same machine, the operator and any exposed persons. With the purpose of highlighting situations or operations that
may result in risks, the meanings of terms used in this manual are indicated here:
- HAZARDOUS AREA: Any area in and/or around a machine where the presence of an exposed person constitutes a
risk to the health and safety of said person
- EXPOSED PERSON: A person fully or partly in a hazardous area
- OPERATOR: The person or personnel in chargeof the installation, the operation, the adjusting, thecleaning, the
repairing and the moving of the machine.
- SPECIALISED PERSONNEL: any person specifically trained and approved to carry out maintenance or repair
interventions that require particular knowledge of the machine, its operation, the installed safety devices, intervention
modes. It must be capable of recognising danger present on the actual machine, therefore avoiding at risk situations.
- RISK: a combination of the probability and seriousness of injury or damage to health which can arise in a dangerous
situation.
- GUARD: a part of the machine that is used to specifically guarantee protection by way of a material barrier.
- PROTECTION DEVICE: a device that reduces risk (unlike the guard) either on its own or together with the guard.
- INTENDED USE: the use of the machine in accordance with the information provided in the operating instructions.
- REASONABLE FORESEEABLE MISUSE: the use of the machine different to the information provided in the
operator’s instructions, which may be the result of readily predictable human behaviour.
- AUTHORISED ASSISTANCE CENTRE: The Authorised Assistance Centre, legally authorised by the Manufacturer,
is formed by specialised staff able to carry out all types of assistance, maintenance and repair work, even of a certain
complexity, required to maintain the machine in perfect working order.
WARNING! Carefully read the following rules. If the instructions describedare not followed, a
situation may arise which causes irreparable damage to the machine or property, or injury - even
severe - to people or animals. Spearhead declines all responsibility for damage caused by not
complying with the safety and injury prevention regulations described below. Spearhead also declines
any responsibility for damage caused by improper use of the machine and/or as a result of
modifications made without authorisation by the manufacturer.

8999128: v1 03/09/2018
Page 2.2 of 2.5 pages Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
2.3 Safety Decals
The flail mower is equipped with safety decals warning about residual risks present on the machine that were not
possible to eliminate. Figure 2.1 specifies the meaning of symbols contained in the decals. The operator must
memorise the meaning of these decals. The labels should always be kept clean and replaced immediately if they are
fully or partially detached or damaged.
1. WARNING - DANGER:
Ensure the hood is fitted to the
machine before commencing
work.
7. WARNING - DANGER:
Moving part hazard. Wait for moving
parts to stop.
2. ATTENTION
Do not perform adjustment and maintenance
work until you have read the operating and
maintenance manual, stopped the machine
and removed the key.
8. WARNING - DANGER:
Rotating tool hazard. Keep clear.
3. ATTENTION
Do not perform adjustment and maintenance
work until you have read the operating and
maintenance manual, stopped the machine
and removed the key.
9. LIFTING POINT
10. WARNING - DANGER:
Shear hazard. Keep hands clear.
4. ATTENTION
Use the required
Personal
Protective Equipment.
11. WARNING - DANGER:
Entanglement and dragging hazard.
Keep hands clear of drive shaft
while operating.
5. ATTENTION
Do not climb on the machine or allow anyone
to be carried on it.
12. WARNING - DANGER:
Crush hazard. Do not stand
between the tractor and the
implement.
6. WARNING –DANGER:
Flying debris hazard. Keep clear.
13. WARNING - DANGER:
PTO shaft hazard: shaft rotates at
540 rpm.
Figure 2.1
Figure 2.2 shows an indication of the precise points on the machine where the safety decals and serial plate are usually
applied by the manufacturer.

8999128: v1 03/09/2018
Page 2.3 of 2.5 pages Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
Figure 2.2
2.4 Personal Protective Equipment
In general it is necessary to wear suitable clothing for the work to be carried out. In particular, as far as flail mowing use,
obey the following provisions:
- It is mandatory to use clothing which is as suitable as possible, meaning not too loose and without any protruding or
moving parts (for example ties or necklaces). Do not wear belts, rings and chains. Always use sturdy safety footwear.
Long hair must betied using a specific cap.
- It is mandatory to use protective goggles or a mask before proceeding with the work in order to protect the face and
eyes from vegetable fragments which may be projected outwards during flail mowing.
- It is mandatory to use protective muffs in order to safeguard hearing from noise from the equipment during work.
2.5 Ecology and pollution
DANGER! Comply with laws in force in the country the machine is being used in regarding use and
disposal of products employed in cleaning and servicing the machine, and comply with the instructions
issued by the manufacturer of said products and featured in the warnings on the relevant packaging.
Keep products used for cleaning and maintenance out of reach of children.
2.5.1 Disposal
When the time comes to scrap the machine, it must be disposed of through a suitable rubbish tip, in compliance with
current legislation. Beforescrapping, sort the machine’s components into plastic or rubber parts, electrical and
electronic material.

8999128: v1 03/09/2018
Page 2.4 of 2.5 pages Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
Parts made entirely from plastic, aluminium or steel can be recycled when collected by special recycling centres.
Collect up waste oil and dispose of it through relevant collection centres.
DANGER! Waste oil qualifies as hazardous waste according to current law and, as such, must not
be released into the environment; it should be recovered and disposed of through suitable collection
centres.
You must contact the relevant environment agency in your country for the collection of waste oil.
2.5.2 Preparation for storage
If the machine is due to be left unused for a long period, it should be stored in a place where it will not be exposed to
the elements and should be protected to avoid deterioration.
Before storing, we recommend cleaning the whole machine thoroughly and suitably lubricating all mechanical parts to
protect them from rust.
Make sure storage temperature is in the range 0°C to 50°C.
Before mothballing the machine, it is advisable to proceed as follows:
2.5.2.1. Clear any shredding debris off therotors and flails;
2.5.2.2. Clean the machine thoroughly;
2.5.2.3. Perform a general inspection, looking out for possible damage to the structure and areas where paintwork has
been scraped off or worn away; make sure the original safety decals are attached in their relevant positions and
are intact and legible;
2.5.2.4. Securely tighten all screws and bolts, especially those fastening the flails; see Section 6.0.
2.5.2.5. Thoroughly grease any parts that usually require this kind of attention, see Section 7.3; smear all non-painted
parts with lubricant; lastly, protect all equipment with a plastic tarpaulin, while making sure there is sufficient
ventilation. Once you have finished this treatment, store the equipment in a dry place;
2.5.2.6. Where possible, store the machine indoors or under shelter, on a level, stable surface.
2.5.2.7. When carried out with due care, this procedure will ensure the equipment is in full working order and in a
perfect state of repair when the time comes to put it back into operation.
2.5.3 Removing the machine from packing or longer term storage
Before using the machine for the first time, or when it has not been used for long periods, proceed as follows:
2.5.3.1. Make sure the machine has not been damaged;
2.5.3.2. Make sure mechanical parts are in a good state of repair and not rusted;
2.5.3.3. Check the flails for wear;
2.5.3.4. Thoroughly grease all moving parts; see Section 7.3;
2.5.3.5. Make sure there is no oil leaking from fittings or hoses;
2.5.3.6. Make sure all guards are correctly fitted.
2.6 Safe use
DANGER! Using the machine correctly, following the rules listed below to the letter and strictly applying all
precautions to avoid hazardous situations will avoid the danger of accidents or injury, helping the machine to
work better, last longer and suffer minimal breakdowns.
Spearhead Machinery disclaims any objective or subjective liability in the event of any failure to apply and comply with
the rules of conduct given herein.
•The machine is not suitable for use in any field other than the agricultural sector.
•The machine must be used by a single operator driving the tractor.
•Any use other than for the specified purpose is seen as misuse.
•Only authorized, suitably trained personnel issued with appropriate instructions must be allowed to use the
machine.
•In addition to reading and understanding the contents of this manual, the appointed operator must be
sufficiently trained in the correct use of the machine and must have a driver’s licence. Operators are advised to
contact the manufacturer if in any doubt as to how to use the machine and what the instructions herein mean.
•The manual must be kept handy at all times so that it can be consulted when necessary. If it is misplaced or
damaged, you must order a replacement copy from Spearhead Machinery.

8999128: v1 03/09/2018
Page 2.5 of 2.5 pages Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
•The operator must make sure no person or animal comes within range of the machine while it is operating.
Never operate the machine near people standing or passing within range of the machine.
•Do not use the machine if you are tired, sick or under the influence of alcohol, medicine or drugs.
•This machine is designed to be used during the day normally; if, in exceptional cases, you need to use it at
night or when visibility is poor, you must use the lighting system supplied with the tractor, or an auxiliary lighting
system, where necessary.
•Any arbitrary change made to this machine shall relieve Spearhead Machinery of any liability for damage or
injury to operators, third parties or property.
•Check the machine carefully each time before putting it into operation. Spearhead Machinery cannot provide
for every possible foreseeable misuse that might result in a potential danger.
•The decals attached to the machine, see Section 2.3 give a series of important instructions: you are advised to
observe them for your own safety.
•Make sure all safety decals are legible. Clean them and, where necessary, replace them with new labels; see
Figure 2.2.
•Before using the machine, make sure all safety devices are fitted in their proper positions and are in a good
state of repair; if any guards are not working or damaged, replace them immediately.
•Before getting out of the tractor and before performing any maintenance work, apply the parking brake, switch
off the engine, remove the key from the ignition and keep it in a safe place.
•Personnel are required to use safety gear and personal protective equipment while using and servicing the
vehicle; see Section 2.3 and Section 2.4.
•The machine operator is strongly advised not to wear any item of clothing that could get caught in machinery.
•Operating the machine may result in dust being generated when working with dry products (hay, straw, etc.).
You are advised to check the filters on the cab ventilation system at regular intervals, or to use suitable
respiratory system protection, such as dust masks.
•During use, the operator must have a sufficiently good view of work areas classed as danger zones;
consequently, you must keep the tractor’s mirrors clean and in an optimum state of repair.
•The machine must not be left unattended while the tractor is running.
•Keep the machine clean of foreign matter (debris, tools, other foreign objects), which could interfere with its
operation and injure the operator.
•Do not work on muddy, sandy or loose soil.
•Check hydraulic hoses for wear. If they have deteriorated (or at least every 5 years), have them replaced.
•Do not use controls or hoses as something to hang on to: these parts move and do not provide a stable
handhold.
•Any changes to the machine could pose a safety hazard. In this case, the user alone will be liable for ensuing
accidents.
•Removing or tampering with safety devices is strictly prohibited.
•Make sure the safety decals are in good condition. If the decals have deteriorated, they must be replaced with
other originals to be ordered from the manufacturer and attached in the position illustrated; see Figure 2.2.
•Be aware of the risk of the machine accidentally touching high voltage overhead lines.
•Never use the machine to carry or lift people, animals or objects.
2.7 Firefighting measures
•It is advisable to ensure that personnel given the task of operating the tractor are familiar with the main courses
of action to be taken in the event of fire.
•All fuels and most lubricants and hydraulic fluids are flammable.
•Do not smoke while refuelling or topping up fluid levels; do not refuel near naked flames; do not siphon off fuel.
•Switch off the tractor’s engine before refuelling; do not refuel indoors.
•Before starting the tractor’s engine, make sure there are no fuel/ lubricant/fluid leaks or spills that could result in
small fires.
•Do not store flammable substances in places that are not suitable for the purpose; do not pierce or burn
pressurized containers or spray cans; do not leave materials soaked in flammable substances lying around in
piles.
•Be careful where you place rags or material that contains flammable residues.
•To minimize the risk of combustion, clean the machine at regular intervals with suitable equipment (water
blaster or compressed air).
•Use appropriate extinguishing means: carbon dioxide, foam, dry chemical.
•Do not use water jets. Only use water jets to cool surfaces exposed to fire.
•Never use petrol, solvents or other flammable or toxic fluids to clean mechanical parts: use approved
commercial solvents, which must be non-flammable and non-toxic.
•Do not perform welding near tanks, pipes, jerry-cans, electrical cables or flammable material in general.
•When performing welding work, use suitable shielding to protect flammable parts.

8999128: v1 03/09/2018
Page 3.1 of 3.2 pages Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
3 Machine Transportation
3.1 Lifting
The vehicle used to transport the machine must be sufficiently powerful, of an appropriate size and suitably prepared
for the purpose.
Before transporting the machine, see Section 1.4 giving the weights and dimensions of the machine. Transportation
should be carried out by qualified haulage contractors who guarantee correct handling of the material being carried.
The Manufacturer accepts no liability for transportation arranged by the Customer or by haulage contractors appointed
by the latter. The machine must be loaded, taking care to avoid damage to the same by any other loads.
Before using, check that the available means are intact and suitable. Select ropes and/or chains of suitable lifting
power, attaching them only to the lifting points designed for that purpose and marked with the relative symbol; see
Figure 2.2 and Figure 3.1.
DANGER!
•Ensure that a crane of suitable lifting power for the machine is available.
•Before proceeding with lifting operations, make sure that any mobile machine elements have been secured
properly.
•Lift the machine with extreme caution and transfer it slowly, without any abrupt movements.
•Lifting and transportation operations may be extremely dangerous unless carried out with the utmost caution.
•Personnel assigned to work should be specialised and fitted out with the relative Individual Protective Devices.
•Unauthorised personnel should be kept at a safe distance.
•Clean, clear andmark out the area of transfer.
•Do not touch suspended loads and remain at a safe distance.
•During handling, loads should not be lifted more than 20 cm from the ground.
•Ensure that the danger area in which the machine is being handled is free from obstacles and that there is a wide
safe area to the side for the transit of persons.
•Under no circumstances should persons pass below suspended loads.
•The surface on which the machine is placed should be level in order to avoid possible shifting of the load.
•When the machine is placed on a means of transport it should be firmly secured to the surface on which it is resting
by means of ropes or chains suitable for the weights to be anchored; see Section 1.4.
•For travel with the tractor, see the warnings given in the Section 3.2 below.
Figure 3.1

8999128: v1 03/09/2018
Page 3.2 of 3.2 pages Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
3.2 Travelling on public roads
CAUTION! When needing to travel on public roads, you must comply strictly with the local Highway Code,
making extra sure you keep your speed to an appropriate level.
Before driving on roads, the relevant lights bar (optional extra) must be installed. You must fit the tractor with a flashing
yellow or orange light. Before driving onto a public road from an unsealed or unclean area, you must clean the tractor‘s
tyres of any mud still on them.
When travelling on public roads, the machine must be kept in the transport position, see Figure 3.2 and the tractor‘s
PTO must be disengaged.
DANGER! Visually inspect the two couplers, see Figure 3.2 (1) to ensure they are positioned correctly. Under
no circumstances should the PTO be engaged while the machine is in the folded position to prevent inevitable
damage to the driveline.
Check that the rear lights units are working correctly as the machine covers the tractor‘s rear lights units when in the
folded position. If the tractor‘s number plate cannot be seen properly, fit an additional duplicate number plate on the
relevant plaque, also located on the lights bar, see Figure 3.2(2).
The weight of the machine alters the stability of the tractor machine unit, affecting steering and braking capacity, and
you should reduce speed accordingly. More specifically, bear in mind that at least 20% of the tractor-machine unit‘s
total weight must be across the front axle at all times.
Check the tractor‘s lifting capacity and stability with the following formula and, where necessary, apply counterweights
on the front, see Figure 3.3.
Figure 3.2
Figure 3.3