Spearhead AGRICUT 180 Assembly instructions

8999153EN: v1.0 18/12/2020
1 Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
Spearhead Machinery
Operator Instruction Manual For
1.8m and 2.7m cut width, 540 PTO input

8999153EN: v1.0 18/12/2020
2 Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
IMPORTANT
Verification Of Warranty Registration
Dealer Warranty Information & Registration Verification
It is imperative that the selling dealer registers this machine with Spearhead before delivery to the end user.
Failure to do so may affect the validity of the machine warranty.
To register machines go to the Spearhead Machinery Limited web site at:
https://my.spearheadmachinery.com/warranty/machine-registration/
Should you experience any problems registering a machine in this manner please contact the Spearhead
Service Department on 01789 491867.
Confirm to the customer that the machine has been registered in the section below.
Registration Verification
Model Type:
Agricut 180/270
Model Number:
95612________
Serial Numbers:
Machine:
S__________
Cutting Implement:
S__________
Other:
Name Of Owner:
Name Of Installing Dealer:
Dealer Address:
Dealer Signature:
Date Of Delivery / Installation:
Date Of Warranty Registration:
IMPORTANT
At the point of transfer of ownership record the above information. Note the serial number of your machine and
always quote it in any communication with us or your dealer. (The serial number plate is located on the machine
mainframe.) This is particularly important when ordering spares. Remember to include all numbers and letters.
The information given throughout this manual is correct at the time of publication. However, in the course of
constant development of Spearhead machines, changes in specification are inevitable. Should you find the
information given in this book to be at variance with the machine in your possession, you are advised to contact
the Spearhead Service department where up-to-date information will be provided.
The manual can contain standard and optional features and is not to be used as a machine specification.
The machine has been tested and is considered safe if carefully used. Ensure your operator is properly trained
in its use and maintenance.

8999153EN: v1.0 18/12/2020
3 Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
(This pageis left blank intentionally)

8999153EN: v1.0 18/12/2020
4 Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
Agricut 180 and 270 Rotary Mowers
This manual includes instructions for installation, use and maintenance of the Agricut 180 and 270 rotary
mowers in the following sections.
The machine is intended for the topping of grass pasture land after grazing, or for weed and thistle control on
agricultural land. The machine is drawn by the tractor by means of a three-point hitch for the Agricut 180 and
the tractor lift arms on the Agricut 270. The machines work on the ground under their own weight and by
virtue of rotating rotors that are driven by the tractor‘s power take-off by means of a P.T.O shaft connection.
Any different use should be considered improper and therefore potentially dangerous to the safety of the
operator and any exposed persons. This manual is integral to the Agricut rotary mower, defines the purpose
for which it was built and contains all the information required for proper and safe use. Regular machine
operation depends on its correct use and adequate maintenance: it is advisable, therefore, to follow these
instructions carefully to prevent any situation that could compromise the machine’s operation and durability.
It is also important to follow that which is described in this manual since Spearhead declines any liability
resulting from negligence of from not observing these norms, since it would result in the warranty being
annulled.
It is mandatory to verify upon delivery that the Agricut rotary mower is integral and complete in all its parts.
Any complaints must presented in written within 8 (eight) days from receiving the machine. Spearhead can
however be contacted at any time for immediate and precise technical assistance and anything required for
optimum operation and maximum performance of the equipment. Upon receiving the product, carefully read
the manual and carefully follow the instructions contained in it.
IMPORTANT
This operator’s manual should be regarded as part of the machine. Suppliers of both new and second-hand
machines are advised to retain documentary evidence that this manual was provided with the machine.
This machine is designed solely for ground vegetation control and must not be used for any other purpose.
Use in any other way is considered as contrary to the intended use. Compliance with, and strict adherence
to, the conditions of operation, service, and repair, as specified by the manufacturer, also constitute
essential elements of the intended use.
This machine should be operated, serviced, and repaired only by persons who are familiar with its
characteristics and who are acquainted with the relevant safety procedures.
Accident prevention regulations, all other generally recognised regulations on safety and occupational
medicine, and all road traffic regulations must always be observed.
Any arbitrary modifications carried out to this machine may relieve the manufacturer of liability for any
resulting damage or injury.
It is potentially hazardous to fit or use any parts other than genuine Spearhead parts.
The company disclaims all liability for the consequences of such use which, in addition, voids the machine
warranty.

8999153EN: v1.0 18/12/2020
5 Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
(This pageis left blank intentionally)

8999153EN: v1.0 18/12/2020
6 Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
Contents List
1Machine Description...............................................................................................................................8
1.1 Intended Usage.........................................................................................................................8
1.1.1 Allowed Uses...............................................................................................................8
1.1.2 Improper Uses.............................................................................................................8
1.2 General Arrangement ...............................................................................................................9
1.2.1 General Arrangement –Agricut 180...........................................................................9
1.2.2 General Arrangement –Agricut 270...........................................................................9
1.3 Identification............................................................................................................................10
1.4 Machine General Specification...............................................................................................10
2Safety....................................................................................................................................................12
2.1 Level Of Danger......................................................................................................................12
2.2 Terminology.............................................................................................................................12
2.3 Safety Decals..........................................................................................................................13
2.4 Proposition 65 .........................................................................................................................14
2.5 Personal Protective Equipment ..............................................................................................15
2.6 Ecology And Pollution.............................................................................................................15
2.6.1 Disposal.....................................................................................................................15
2.7 Safe Use..................................................................................................................................15
2.7.1 For The Owner And Operator...................................................................................16
2.7.2 For the employer .......................................................................................................16
3Machine Transportation........................................................................................................................18
3.1 Lifting.......................................................................................................................................18
3.1.1 Lifting –Agricut 180...................................................................................................18
3.1.2 Lifting –Agricut 270...................................................................................................18
3.2 Unpacking ...............................................................................................................................19
3.3 Transportation.........................................................................................................................20
3.3.1 Putting Into Transport Position..................................................................................20
3.4 Public Roads...........................................................................................................................20
3.4.2 Before Driving On Public Roads ...............................................................................21
3.4.3 Driving On Public Roads...........................................................................................21
3.5 Machine Storage.....................................................................................................................21
3.5.1 Safely Preparing For Storage....................................................................................21
3.5.2 Storing The Machine.................................................................................................21
3.5.3 Removing The Machine From Packing Or Longer Term Storage............................22
4Use Of The Machine.............................................................................................................................24
4.1 Before Connecting To The Tractor And Using The Machine.................................................24
4.2 Connecting To A Tractor.........................................................................................................24
4.2.1 Connecting To A Tractor –Agricut 180.....................................................................24
4.2.2 Connecting To A Tractor –Agricut 270.....................................................................26
4.3 Running The Machine For The First Time..............................................................................27
4.4 Starting Work...........................................................................................................................28
4.5 Stopping The Machine............................................................................................................28
4.6 Disconnecting From A Tractor................................................................................................28
5Machine Adjustments...........................................................................................................................30
5.1 Cutting Height Adjustment......................................................................................................30
5.2 Headstock Position - Agricut 180............................................................................................31
5.2.1 Adjusting Headstock Position....................................................................................31
5.3 Shear Bolt Protection..............................................................................................................31
6Maintenance .........................................................................................................................................34
6.2 Lubricating Oil Precautions.....................................................................................................34
6.3 Maintenance Work That Can Be Performed By The Operator..............................................35
6.4 P.T.O Shaft..............................................................................................................................35
6.5 Gearbox –Agricut 180............................................................................................................35
6.5.1 Check And Tighten Fixing Bolts................................................................................35
6.5.2 Oil Level Check And Top-Up.....................................................................................36
6.5.3 Oil Drain And Refill....................................................................................................36
6.6 Outer Gearboxes –Agricut 270..............................................................................................37
6.6.1 Tightening Outer Gearbox Fixing Bolts.....................................................................37
6.6.2 Outer Gearbox Oil Level Check And Top-Up...........................................................37

8999153EN: v1.0 18/12/2020
7 Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
6.6.3 Outer Gearbox Oil Drain And Refill...........................................................................38
6.6.4 Outer Gearbox Removal...........................................................................................38
6.7 Central Gearbox –Agricut 270...............................................................................................39
6.7.1 Check And Tighten Central Gearbox Fixing Bolts....................................................39
6.7.2 Central Gearbox Oil Level Check And Top-Up.........................................................39
6.7.3 Central Gearbox Oil Drain And Refill........................................................................40
6.8 Flexible Couplings –Agricut 270............................................................................................40
6.9 Blade Carrier...........................................................................................................................41
6.10 Blades......................................................................................................................................41
6.10.1 Replacing The Blades...............................................................................................41
6.11 Scheduled Maintenance Table...............................................................................................43
6.12 Cleaning The Machine............................................................................................................43
6.13 Recommended Lubricants......................................................................................................44
6.14 Torque Settings.......................................................................................................................44
6.14.1 General Torque Settings...........................................................................................44
6.14.2 Specific Torque Settings ...........................................................................................44
7Troubleshooting....................................................................................................................................46
7.1 Troubleshooting - Agricut 180.................................................................................................46
7.2 Troubleshooting - Agricut 270.................................................................................................46
8Spare Parts...........................................................................................................................................48
8.1 How To Obtain The Correct Spare Part Numbers.................................................................48
8.2 Spare Parts Ordering..............................................................................................................49
8.3 Dealer Network .......................................................................................................................49

8999153EN: v1.0 18/12/2020
8 Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
1 Machine Description
1.1 Intended Usage
1.1.1 Allowed Uses
The machine has been designed for use in the agricultural sector only, for the topping of grass pasture land
after grazing, or for weed and thistle control on agricultural land.
When the rotary mower works it guarantees the required level of safety even in the presence of an
insignificant malfunction of its components or hazardous operating conditions, however, always within the
permitted uses.
The rotary mower must not be used for purposes other than those described in this manual.
1.1.2 Improper Uses
The machine is not intended for grass mowing, or for the cutting of set-aside, or brush/woodland clearance.
DANGER! Under no circumstances should the machine be used for any purpose other than the
permitted uses (given above) or in any field other than the agricultural field. More specifically, it
must not be used for: Shredding woody stalked plants, grinding wood, or for similar applications
on hard materials, or working with blades in contact with the ground. Do not use the machine on
stony ground as this would mean the blades would come into contact with stones, with the
extremely hazardous result of stones being flung off at great speed. In addition, the blades
would fail mechanically straight away, with just as serious consequences. Failure to comply with
the instructions given shall result in serious safety hazards. If in any doubt, contact the
manufacturer.
WARNING! Failure to follow these rules may expose people to the danger of serious harm or even
death.
The P.T.O must be run at the required speed (540 rpm).
DANGER! Do not make sharp turns while the machine is working, making sure you always lift it when
changing direction and reversing.
Figure 1.1 Spearhead Agricut 180 and 270

8999153EN: v1.0 18/12/2020
9 Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
1.2 General Arrangement
Figure 1.2 to Figure 1.5, show the layout of the Agricut 180 and Agricut 270. The operator should familiarise
themselves with the various elements, as they are referred to in other sections of this manual.
The rotary mowers consist of the following parts:
1.2.1 General Arrangement –Agricut 180
POSITION
DESCRIPTION
POSITION
DESCRIPTION
1
Gearbox
1
Rotor hub
2
Transport strap
2
Blade carrier
3
Skid
3
Blade
4
P.T.O shaft
5
Headstock
Figure 1.2
Figure 1.3
1.2.2 General Arrangement –Agricut 270
POSITION
DESCRIPTION
POSITION
DESCRIPTION
1
Machine body
1
Rotor hub (2 off)
2
Top cover
2
Blade carrier (2 off)
3
Lift arm brackets
3
Blade (LH)
4
Skid
4
Blade (RH)
5
P.T.O shaft
Figure 1.4
Figure 1.5

8999153EN: v1.0 18/12/2020
10 Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
1.3 Identification
Each machine is equipped with a serial plate; see Figure 1.6 that includes the following data in this order:
1. UKCA Conformity Marking.
2. Machine Whole Goods Code (WGC).
3. Serial number of the machine.
4. Mass in kg.
5. Production Year (year of construction).
6. Design conformity standard.
7. Machine Product Group Code.
8. EU Authorised Representative QR scan code.
9. Manufacturer marking with name and address.
10. EAC Eurasian/Russian Conformity Marking.
11. EC European Conformity Marking.
Figure 1.6 –Serial Plate
Data on the Spearhead manufacturer’s plate should always be referred to when requesting assistance and/or
requiring replacement spare parts.
This data can identify the machine and its characteristics and specification for its particular time of manufacture,
certifying that it responds to current regulations. For this reason the plate should never therefore be removed nor
be used for other purposes; if the machine is dismantled, it should be destroyed to prevent any form of abuse.
By utilising a smart phone and scanning the Authorised Representative QR scan code found on the right-hand
side of the serial plate (ref 8, Figure 1.6) using a suitable QR scanning App, you can find details for Spearhead
Machinery authorised representatives for its various territories.
1.4 Machine General Specification
Agricut Series (1)
Agricut 180
Agricut 270
A
Overall Width
1970mm
See Figure
1.7
2971mm
See Figure
1.8
B
Overall Length
2320mm
2035mm
C
Overall Height (max)
1141mm
665mm
Weight
290kg
430kg
Number of Rotors
1
2
Number of Blades
2
4
Cutting Width
1800mm
2800mm
Linkage Mounting
Cat I & II
Cat II
P.T.O Speed
540rpm
Power Requirements
22kW (30hp) at P.T.O
Cutting Height
30-150mm
Notes: (1) Spearhead constantly reviews and improves product designs and reserve the right to change this
information. Actual machines may vary from the above specification. Contact your Spearhead
Sales representative if you have any queries.

8999153EN: v1.0 18/12/2020
11 Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
Figure 1.7
Figure 1.8

8999153EN: v1.0 18/12/2020
12 Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
2 Safety
2.1 Level Of Danger
The safety of the operator and exposed persons is the main concern of the designer and the manufacturer of the
machine. When designing a new machine, one tries to plan for all possible danger situations and risks
connected to using the machine, adopting the steps necessary to make the equipment as safe as possible. The
number of accidents remains very high however, especially due to incautious and awkward use of the machine.
It is therefore recommended to carefully read this manual and this section in particular, regarding safety
standards, avoiding behaviour that is inappropriate or in contrast with the instructions contained in this manual.
Pay attention to the following danger signal where contained in this manual and follow safety instructions.
DANGER! Level 1 - This signal warns that if the described operations are not carried out
properly, they will cause serious injury, death or long-term health risks.
WARNING! Level 2 - This signal warns that if the described operations are not carried out
properly, they may cause serious injury, death or long-term health risks.
CAUTION! Level 3 - This signal warns that if the described operations are not carried out
properly, they may cause damage to the machine.
2.2 Terminology
The indicated levels of danger refer to specific risk situation that may occur during machine use and may involve
the same machine, the operator and any exposed persons. With the purpose of highlighting situations or
operations that may result in risks, the meanings of terms used in this manual are indicated here:
- HAZARDOUS AREA: Any area in and/or around a machine where the presence of an exposed person
constitutes a risk to the health and safety of said person
- EXPOSED PERSON: A person fully or partly in a hazardous area
- OPERATOR: The person or personnel in charge of the installation, the operation, the adjusting, the cleaning,
the repairing and the moving of the machine.
- SPECIALISED PERSONNEL: any person specifically trained and approved to carry out maintenance or repair
interventions that require particular knowledge of the machine, its operation, the installed safety devices,
intervention modes. It must be capable of recognising danger present on the actual machine, therefore avoiding
at risk situations.
- RISK: a combination of the probability and seriousness of injury or damage to health which can arise in a
dangerous situation.
- GUARD: a part of the machine that is used to specifically guarantee protection by way of a material barrier.
- PROTECTION DEVICE: a device that reduces risk (unlike the guard) either on its own or together with the
guard.
- INTENDED USE: the use of the machine in accordance with the information provided in the operating
instructions.
- REASONABLE FORESEEABLE MISUSE: the use of the machine different to the information provided in the
operator’s instructions, which may be the result of readily predictable human behaviour.
- AUTHORISED ASSISTANCE CENTRE: The Authorised Assistance Centre, legally authorised by the
Manufacturer, is formed by specialised staff able to carry out all types of assistance, maintenance and repair
work, even of a certain complexity, required to maintain the machine in perfect working order.
WARNING! Carefully read the following rules. If the instructions described are not followed, a
situation may arise which causes irreparable damage to the machine or property, or injury -
even severe - to people or animals. Spearhead declines all responsibility for damage caused by
not complying with the safety and injury prevention regulations described below. Spearhead
also declines any responsibility for damage caused by improper use of the machine and/or as a
result of modifications made without authorisation by the manufacturer.

8999153EN: v1.0 18/12/2020
13 Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
2.3 Safety Decals
The rotary mower is equipped with safety decals warning about residual risks present on the machine that were
not possible to eliminate. Figure 2.1 specifies the meaning of symbols contained in the decals. The operator
must memorise the meaning of these decals. The labels should always be kept clean and replaced immediately
if they are fully or partially detached or damaged.
Read and Comply
with Operator’s
Manual
Read and understand
the Operator’s Manual
before attaching and
operating this
machine.
Beware of Rotating
Blades
Danger of cutting or
severing of limbs under
covered rotating parts.
Do not reach or probe
under the machine
when it is driven by the
tractor.
Stop the Tractor
before Working on
the Machine
Always let the tractor
come to a stop, and
remove the starter key
before you adjust,
lubricate, repair or
carry out any
maintenance work on
the machine.
Machine Lifting
Points
When lifting the
machine with other
than approved tractor
attachment points, use
the marked lifting points
for safe and balanced
lifting.
Keep a Safe Distance
from the Machine
Danger of flying
objects when the
machine is working.
Bystanders must keep
a safe distance when
machine is being used.
Input P.T.O. Speed
The rated P.T.O. speed
for this machine is
540 rpm. For optimum
performance, the
machine should be
driven at this speed.
Under no
circumstances, should
this speed be
exceeded.
Risk of Hand Entanglement
Rotating parts under cover.
P65 cancer and reproductive harm
Operating, servicing and maintaining
this equipment can expose you to
chemicals which are known to the
State of California to cause cancer
and birth defects or other reproductive
harm.
Figure 2.1

8999153EN: v1.0 18/12/2020
14 Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
Figure 2.2 shows an indication of the precise points on the machine where the safety decals and serial plate are
usually applied by the manufacturer.
Agricut 180
Agricut 270
Figure 2.2
2.4 Proposition 65
Figure 2.3
Operating, servicing and maintaining this equipment can expose you to chemicals including gasoline, diesel fuel,
lubricants, petroleum products, engine exhaust, carbon monoxide, and phthalates, which are known to the State
of California to cause cancer and birth defects or other reproductive harm.
To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle
in a well-ventilated area and wear gloves and wash your hands frequently when servicing your vehicle. Battery
posts, terminals and related accessories contain lead and lead compounds, chemicals known to the state of
California to cause cancer, birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov.
This website, operated by California's Office of Environmental Health Hazard Assessment, provides information
about these chemicals and how individuals may be exposed to them.

8999153EN: v1.0 18/12/2020
15 Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
2.5 Personal Protective Equipment
In general it is necessary to wear suitable clothing for the work to be carried out. In particular, as far as rotary
mowing use, obey the following provisions:
- It is mandatory to use clothing which is as suitable as possible, meaning not too loose and without any
protruding or moving parts (for example ties or necklaces). Do not wear belts, rings and chains. Always use
sturdy safety footwear. Long hair must be tied using a specific cap.
- It is mandatory to use protective goggles or a mask before proceeding with the work in order to protect the
face and eyes from vegetable fragments which may be projected outwards during rotary mowing.
- It is mandatory to use protective muffs in order to safeguard hearing from noise from the equipment during
work.
2.6 Ecology And Pollution
DANGER! Comply with laws in force in the country the machine is being used in regarding
use and disposal of products employed in cleaning and servicing the machine, and comply with
the instructions issued by the manufacturer of said products and featured in the warnings on the
relevant packaging. Keep products used for cleaning and maintenance out of reach of children.
2.6.1 Disposal
When the time comes to scrap the machine, it must be disposed of through a suitable rubbish tip, in compliance
with current legislation. Before scrapping, sort the machine’s components into plastic or rubber parts, electrical
and electronic material.
Parts made entirely from plastic, aluminium or steel can be recycled when collected by special recycling centres.
Collect up waste oil and dispose of it through relevant collection centres.
DANGER! Waste oil qualifies as hazardous waste according to current law and, as such, must
not be released into the environment; it should be recovered and disposed of through suitable
collection centres.
You must contact the relevant environment agency in your country for the collection of waste oil.
2.7 Safe Use
NOTE: All references to ‘tractor’ equally apply to any power sources used to drive the machine.
WARNING! All guards must be correctly fitted. Always ensure that all guards are in position, properly
fitted and properly maintained. Do not attempt to operate the machine before making this check each
time the machine is used.
WARNING! Fit the Power Take Off (P.T.O) shaft guard & check chains. P.T.O guard check chains
must always be attached to a suitable point on the tractor and machine to prevent movement of the
outer plastic shields.
WARNING! Beware of bystanders and animals. Before starting the tractor engine and moving off,
check that it is safe to do so. Never operate the machine with bystanders or animals near or on the
machine or tractor. Never stand in or walk through the flow of any material being discharged. Never
stand between tractor wheels and the machine.
WARNING! Always operate safely. Never operate the machine without maintaining full control of the
tractor.
WARNING! Never wear loose fitting or ragged clothing. Avoid injury - always wear clothing which
cannot get caught in machinery.
WARNING! Never operate the machine with any parts missing. Check the machine regularly for loose
or damaged parts. Pay particular attention to the condition of all safety guards. Always use genuine
Spearhead Machinery replacement parts in the interest of safety. Failures caused by the use of

8999153EN: v1.0 18/12/2020
16 Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
unapproved replacement parts will not be covered by our warranty, nor will any liability be accepted for
damages or injury thus incurred.
WARNING! Always carry out safe maintenance. Before attempting any repair or maintenance to the
machine, always switch off the tractor engine and remove the P.T.O. shaft. Do not work under any
machine raised on hydraulics unless it is supported by a solid safety support.
WARNING! Beware of dust. Keep tractor cab windows and doors closed at all times to reduce the risk
of dust and flying debris from entering. In dusty conditions the use of a suitable mask, to EN 149, is
strongly recommended.
WARNING! Certain tractor implement combinations, dependant on operating conditions, may generate
a noise level in excess of 90db at the operator’s ear, even in a 'Q' cab. In these circumstances ear
defenders should be worn. Keep cab windows and doors closed at all times to reduce noise levels.
WARNING! Certain tractor implement combinations, dependant on operating conditions, may generate
a noise level in excess of 90db at the operator’s ear, even in a 'Q' cab. In these circumstances ear
defenders should be worn. Keep cab windows and doors closed at all times to reduce noise levels.
2.7.1 For The Owner And Operator
WARNING! Always have this operator’s manual available for quick and easy reference.
WARNING! Do not start or carry out maintenance on this machine until you have read all the safety
precautions to be observed and until you fully understand the controls and functions of the machine as
detailed in the following sections. If you do not understand any part of this manual, ask your dealer for
assistance.
WARNING! Never operate the machine with any of the rotor blades missing or damaged. To prevent
injury when changing the blades, always block the rotor to stop it rotating.
WARNING! Never stand on the machine, attempt any maintenance or adjustments with the tractor
engine running or P.T.O. shaft connected.
WARNING! The operator must retain full control of machine and tractor functions at all times whilst the
machine is in operation.
WARNING! A four leg chain sling is required to hoist the machine. The sling should be approved to a
minimum lift capacity of one tonne. The lifting points are clearly marked with 'hook' symbols.
WARNING! Always ensure the tractor front end weight is sufficient to give proper front wheel contact
and safe steering when machine is raised on tractor hydraulics.
WARNING! Never operate the machine when bystanders are present as foreign objects could be
ejected at very high speed from underneath it.
WARNING! It is the owner's/operator's responsibility to ensure that the machine is fitted with correct
lighting and safety markings when moving it on the public highway during the hours of darkness.
CAUTION! Spearhead Machinery will not be held responsible for failure caused by the use of incorrect
lubricants. For further information, refer to the lubrication chart; see Section 6.13.
2.7.2 For the employer
Every employee must be given training at regular intervals on how to use this machinery (at least once a year) in
accordance with the guide lines issued by the employer’s insurance. Untrained or unauthorised members of staff
must not use this machine.

8999153EN: v1.0 18/12/2020
17 Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
(This pageis left blank intentionally)

8999153EN: v1.0 18/12/2020
18 Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
3 Machine Transportation
3.1 Lifting
WARNING! Only use approved lifting equipment which is correctly fastened to the machine. This will
increase your personal safety. Failure to follow the safety instructions could result in accidents and
serious injuries.
The vehicle used to transport the machine must be sufficiently powerful, of an appropriate size and suitably
prepared for the purpose.
Before transporting the machine, see Section 1.4 giving the weights and dimensions of the machine.
Transportation should be carried out by qualified haulage contractors who guarantee correct handling of the
material being carried.
The Manufacturer accepts no liability for transportation arranged by the Customer or by haulage contractors
appointed by the latter. The machine must be loaded, taking care to avoid damage to the same by any other
loads.
Before using, check that the available means are intact and suitable. Select ropes and/or chains that have a
minimum Safe Working Load (SWL) of 1.5 tonnes, attaching them only to the lifting points designed for that
purpose and marked with the relative symbol.
3.1.1 Lifting –Agricut 180
CAUTION! Guides are provided on the machine to enable movement by forklift; see Figure 3.1. It is
essential that the blade carrier and blades are positioned parallel with the fork lift tines. The tines should
be fully inserted, angled downwards slightly, with the tips engaging underneath the cross member.
Failure to position the blade carrier and blades correctly can result in damage to the machine.
Figure 3.1
3.1.2 Lifting –Agricut 270
CAUTION! Guides are provided on the machine to enable movement by forklift. It is essential that the
blade carrier and blades are positioned parallel with the fork lift tines. The tines should be fully inserted,
angled downwards slightly, with the tips engaging underneath the cross member. Failure to position the
blade carrier and blades correctly can result in damage to the machine.
Access to two fork guides are provided through the lift arm channels at the front of the machine. This enables
movement of the complete unit by forklift; see Figure 3.2.

8999153EN: v1.0 18/12/2020
19 Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
Figure 3.2
3.2 Unpacking
Figure 3.3
Remove the P.T.O. shaft from its storage position, and place it safely away from machine; see Figure 3.3.
Ensure the manufacturer’s instruction book is kept in a safe place for future reference.
Figure 3.4
Remove any stacking/transport legs attached to the machine; see Figure 3.4.

8999153EN: v1.0 18/12/2020
20 Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
Figure 3.5
Check underneath the machine and remove any restrainer wire or cable ties used to prevent blade movement
during transport; see Figure 3.5.
Inspect the underside of the machine for damage and ensure the blade rotates freely and does not foul on the
body.
WARNING! Before attempting to access the underside of the machine, ensure it is adequately and
safely supported. Do not rely on the tractor’s hydraulics. Use safety supports that have a minimum Safe
Working Load (SWL) of 1.5 tonnes.
3.3 Transportation
3.3.1 Putting Into Transport Position
Figure 3.6
With the P.T.O. shaft correctly connected, raise the machine to a safe transport position. Ensure there is a
clearance of at least 100mm between the underside of the shaft and the body of the machine whilst in the
transport position. Lock the lift arm stop in this position; see Figure 3.6.
CAUTION! Raising the tractor lift arms too high may cause damage to the P.T.O. shaft if the tractor
was to drive over any bumps and the machine was to bounce on the lift arms.
Check that there is no lateral movement on the machine when it is in the raised position. Adjust the tractor
stabiliser chains (or bars) if required.
3.4 Public Roads
WARNING! Read all the safety instructions carefully before driving on the public road. This will ensure
that dangerous situations and accidents are avoided. Lack of information can cause accidents.