Speco P-FA User manual

INSTRUCTION MANUAL
INSTRUCTION MANUALINSTRUCTION MANUAL
INSTRUCTION MANUAL
FOR ASSISTANCE OR REPAIR SERVICE CONTACT:
200 New Highway, Amityville, NY 11701-0726
631-957-8700 Toll Free: 1-800-645-5516
www.specotech.com
P
PP
P-
--
-FA
FAFA
FA
DIGITAL FM AM
DIGITAL FM AM DIGITAL FM AM
DIGITAL FM AM TUNER
TUNERTUNER
TUNER
Speco Technologies is constantly developing and improving products.
We reserve the right to modify product design and specifications without
notice and without incurring any obligation. Rev.4/02/20.
We are not responsible for typographical errors.
C
2018 Speco Technologies All rights reserved.
PROFESSIONAL SERIES
PROFESSIONAL SERIESPROFESSIONAL SERIES
PROFESSIONAL SERIES

1 10
P-FA P-FA
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE
OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
TO PREVENT ELECTRICAL SHOCK, MATCH WIDE BLADE PLUG TO WIDE SLOT FULLY INSERTE.O.
A
This lightning flash with arrow-
CAUTION
Warning: To reduce the risk of
A
The exclamation point within
head symbol, within an
equi-
e
lectric shock, do n
o
t
remove
an
equilateral
triangl
e
is
lateral
triangle, is intended to
alert the user to the presence
of uninsulated "dangerous
cover (or back)
.
There are no
user-serviceable parts inside.
Refer servicing to qualified service
intended to alert the user t
o
the presence of important
operating and maintenance
v
o
ltage
"
within the pr
o
duct
'
s
personnel.
(servicing) instructions in
enclosure that
may be of
the literature accompanying
sufficient
magnitude
to
the appliance.
constitute a risk of electric
shock to pers
o
ns
.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with drycloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two
blades with one wider thanthe other. A grounding type plug has two blades and a third grounding prong.
The wide blade and the third prong are provided for your safety. If the provided plug does not lit into
your outlet, consult an electrician for replacement of the obsolete outlet.
1 O. Protect the power cord from being walked on or pinched, particularly at the plugs, convenience
receptacles, and at the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug the apparatus during lightning storms or when unused for long periods of time.
14. Leave all servicing to qualified personnel. Servicing is required when the apparatus has been damaged
in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen
into the apparatus, or apparatus has been exposed to rain or moisture, does not operate normally,
or has been dropped.
15. This appliance shall not be exposed to dripping or splashing water and no object filled with liquid
such as vases shall be placed on the apparatus.
16. Caution: to prevent electrical shock, match wide blade plug to wide slot and fully insert.
17. Please keep a well ventilates environment around the entire unit.
WARNING

9 2
P-FA P-FA
S PECIFICATIONS
TUNER SECTION
Tuning Range.
Antenna Input.......................................
....................FM 87.5MHz 108.0MHz
AM 530KHz 1620KHz
FM 300 ohms Twin Lead or 75 ohms Coax AM
Single Conductor Lead Wire
P-FA
Usable Sensitivity ....................................................................FM 2uV,AM4.5uV
Signal to Noise Ratio.
Output Level
FM 60dB AM 50dB
Congratulations and thank you for your purchase of the PFA Digital multifunction
commercial tuner. These tuners are designed to provide quality sound
Line Output Level ................................................. 775mV (0dBm) Unbalanced
Music on hold Output Level ....................................... 775mV (0dBm) balanced
Memory Back-up ...............................................For 45 days (After AC Power Off)
GENERAL
Power Source
reproduction and to produce the best and highest quality audio at an affordable
price. We wish you great enjoyment and satisfaction when using your tuner, whether
you are an installer or reinforcement engineer.
Although it is neither complicated to install nor difficult to operate your tuner,
AC ..... ....................................................... 120V 230V 50/60Hz a few minutes of your time is required to read this manual for a properly wired
DC ..... ..................................................................... 12V - 24V DC Installation and familiarity with its many features. Please take great care in
Power Consumption............................................................................................... 15W
Dimensions....................................................................... 420 (W) 44 (H) 210 (D) mm
16.5 (W) x 1.7 (H) x 8.3 (D) in
unpacking your tuner and do not discard the carton or other packing materials.
These may be needed when moving your tuner or in the unlikely event it ever
becomes necessary return your tuner for service. To avoid damage, never place
the unit near radiators, in front of heating vents, in direct sunlight, or in
excessively humid or dusty locations. Connect your tuner as illustrated in the
Weight (Net)............................................................................................... 6.6lbs
For rack mounting use included rack mount kit
NOTE: Specifications and design subject to change without notice.
3Kg following page.
• 6+6+6 FM Presets.
• 6+6 AM Presets.
• Tuner retains Presets When Power is Off.
• Large LCD Digital Display.
• SCAN and SEEK Functions.
• Auto Store Memory Function (A/PS).
• Preset Memory SCAN Function (A/PS).
• Signal Strength Meter.
• Balanced Music on hold Output.
• Unbalanced RCA Output.
• AC and DC 12-24V operation.
• Standard 1 Rack Unit EIA Rack Chassis.

3 8
P-FA P-FA
AM/
FM DIPOLE ANTENNA
SYSTEM
ANTENNA
MUSIC
DC12V GND 75
n
300
n
ON
HOLD
MADE IN KOREA
FUSE6A250VA
AC 120
-
220V 50/60Hz
FM/AM TUNER & CD DECK P-FA. CD-600R
CONNECTIONS
The use of solid state circuitry and advanced manufacturing techniques built in
your unit results in very high reliability. Under normal operating conditions, your
amplifier should not require service other than an occasional external cleaning.
Keep the original carton and packing material to use if you need to return your unit
for service. Merchandise to be returned for out-of-warranty or in-warranty repair
requires prior written authorization. Please write or call toll free 1-800- 645-5516
(or in METRO NEW YORK 631-957-8700). We request you enclose a packing slip
with the shipment with a complete description of the problem and dated proof of
purchase, if in warranty. When shipping the unit to the factory, please be sure to
pack the unit well enough to withstand rough handling and use return shipping
label supplied by Speco Technologies. Ship the unit, FREIGHT PREPAID, TO:
200 NEW HIGHWAY- P.O. BOX 726
AMITYVILLE, NEW YORK 11701-0726
When ordering parts, please give a description or the part number, if available.
Direct your order to the PARTS DEPARTMENT. We will then advise total cost for
remittance including shipping and handling.
MC-
565066CHANNELPO WE RAM P LIF I
ER
PEAK LEVEL
-40 dB
POW ER
CCHH--11CCHH--22CCHH--33CCHH--
44CCHH--
55CCHH--66
PROT-A
PEAK LEVEL
-40dB
PROT-B
POWER
CD - 6 00 R 6 CD PLA Y E R
RE C EI V E R
OP O P E N E N
DI SCU P
DO W N D O DO
12
TRA C
K
S CA N
RE PR E PE A E AT T
PWR
MEMO
1
MEM
O 4
M
6
ME M OM
EMO 55
F M/AMF M/A M DIGIT
DIG ITALA L T U N E RTU
NE R
DOWN
UP
MEMORY
P O P O WE R W E R
I/ OI / O

7 4
P-FA P-FA
CONNECTION OF THE ANTENNA AND THE GROUND CABLE
FRONT PANEL CONTROLS
AM/FM ANTENNA
AM/FM broadcasting is weakened by hills and valleys, around tall buildings and in
iron- reinforced buildings.
INSTALLATION OF FM ANTENNA USING 300 OHM TWIN LEAD
Connect the leads from the antenna of the terminals marked 300 ohm.
Rotate antenna to direction of strongest reception. (Fig. 1-1)
INSTALLATION OF AM/FM ANTENNA USING COAXIAL CABLE (75 OHM)
Connect center conductor to 75 ohm terminal and shield to GND.
INDOOR ANTENNA
In regions where AM/FM broadcasting is heard comparatively well due to the near
proximity of stations, you can receive broadcasting of good quality by using
a T- type (FM dipole) antenna. Mount the antenna at the best location for
reception after connecting it to the terminals marked 300 ohm. (Fig. 1-1)
1. POWER SWITCH (MAIN &TUNER DISPLAY)
Pressing this switch to ON will light LCD/LED indicator and supply power to the
unit.
2. VOLUMECONTROL
This control is used for adjusting output level min - max (0dB - 50dB)
3. OUTPUT LED LEVELDISPLAY
This display indicates the output level in 3dB increments.
4. TUNERDISPLAY
Indicates frequency of station selected.
5. SEEK UP/DOWN TUNINGCONTROL
These buttons are used to manually tune stations.
6. BAND SELECTOR AM OR FM /EQ
This switch is used for selecting AM 1, or 2, or FM 1, 2 or 3.
Tone control (EQ) Lou-n, Lou-f
7. SCAN/UP MONITOR (SEEK)
When SCAN/UP button is pressed, the frequency increases by one channel step
with station detection.
If a valid signal is detected, the current frequency blinks every 0.5 sec for 5
seconds.
The scan/up will automatically continue until the scanning function is released. the
tuner will remain at the selected frequency.
8. MEMORYSWITCH
1) Directly accesses the preprogrammed station within the selected
frequency band.
2) Performs preset memory read/write functions:
• WRITE function: If one of the M2-M3 buttons are pressed for more than 2
seconds, the current frequency will be stored to corresponding memory area.
• When saving a station, the tuner will mute for 0.5 seconds.
• READ function: If one of the M2-M3 buttons are pressed for less than 2
3
8 6
1
2
9
10 11 5
7
4
ANTENNA
AM FM
MUSIC
GND 75 300 ON HOLD

7 4
P-FA P-FA
seconds, the tuner will tune to the frequency stored in memory.

5 6
P-FA P-FA
ANTENNA
MUSIC
DC12V GND 75
n
300
n
ON
HOLD
MADE IN KOREA
AC 120
-
220V 50/60H z
9. MUTE /POWER
Power switch LCD displayed off and output off
R EAR PANEL CONTROLS
10. CH PRESETTINGSTATIONS
The unit can store a total of 18 preset for FM band & 12 preset for AM.
When a station is stored, a preset number is assigned to the station. Use
the preset number to tune in to a preset station directly
Ex1) Current receiving frequency: FM1, CH3.
11. PS/AS
1).PS/AS to auto scan the station
1. ACINLET
AC 120V or 220V AC Voltage operation. Then plug AC cord into AC
outlet.
2. FUSE HOLDER (AC)
The fuse holder contains the AC power fuse. Replace only with same type fuse when
it is blown. If it continuously blows, stop replacing fuse and refer servicing to qualified
personnel.
VOLTAGE AC
1 2 0 VAC 220 V
FUSE RATING 0. 5A
250V 0. 25A 250V
3. ANTENNA TERMINALS
AM/FM Terminal: You can connect 75 ohm coaxial cable or 300 ohm TV cable
according to the antenna system you have. You may also use an FM dipole antenna
in strong signal areas, (included)
GND Terminal: Ground this terminal if noise or hum is present and when using an
outdoor antenna.
NOTE: When using an outdoor antenna (FM or AM) always provide for lightning
protection.
4. OUTPUTRCA
For connection to an amplifier AUX input.
5. MUSIC ON HOLD OUTPUT TERMINALS
These terminals are to be used for connection to a telephone system for music on
hold. (600 ohm)
6. DC 12-24V INPUT SCREW TERMINAL
This is terminals for DC 12-24V battery power supply, when
unexpected AC power failure.
IMPORTANT NOTICE:
Please note the "+","-" polarity connecting DC 24V. For the connection of battery
connect"+" polarity terminal after"-" polarity terminal connection