SPL Dynamics ICE-150.2 User manual

ICE-150.2
ICE-150.4

SPL Dynamics new ICE - series Class AB full frequency amplifiers provide
high sound performance reinforcement for your car audio system without
compromise.
To achieve optimum performance,it is highly recommended that you read this
Owner’s Manual before installation. Check also our web-pages to have more
information about different system configurations.
WARNING
High power audio systems in the vehicle are capable of generating “ Live
Concert ” high levels of sound pressure. Continued exposure to excessively
high volume sound levels may cause hearing loss or damage. Also operation
of motor vehicle while listening to audio equipment at high volume levels may
impair your ability to hear external sounds as horns, warning or emergency
vehicles. For safety driving Consumer Electronics recommends at lower
sound levels while driving.
MOUNTING YOUR AMPLIFIER
The mounting position your amplifier has a great effect on its ability to
dissipate heat generated during normal operation. It has a large heat sink for
removing heat and also designed with a thermal shut-down circuit. Any
configuration, which allows moving air to be directed over the cooling fins will
improve cooling feature dramatically. DO NOT enclose the amplifier in a small
box or cover it that air cannot flow around the fins.
Temperatures in the car trunks have been measured as high as 79 degrees
Celsius in the summer. To achieve maximum flow in enclosed trunk,mount the
car amplifier to vertical position.

SPL Dynamics new ICE - series Class AB full frequency amplifiers provide
high sound performance reinforcement for your car audio system without
compromise.
To achieve optimum performance,it is highly recommended that you read this
Owner’s Manual before installation. Check also our web-pages to have more
information about different system configurations.
WARNING
High power audio systems in the vehicle are capable of generating “ Live
Concert ” high levels of sound pressure. Continued exposure to excessively
high volume sound levels may cause hearing loss or damage. Also operation
of motor vehicle while listening to audio equipment at high volume levels may
impair your ability to hear external sounds as horns, warning or emergency
vehicles. For safety driving Consumer Electronics recommends at lower
sound levels while driving.
MOUNTING YOUR AMPLIFIER
The mounting position your amplifier has a great effect on its ability to
dissipate heat generated during normal operation. It has a large heat sink for
removing heat and also designed with a thermal shut-down circuit. Any
configuration, which allows moving air to be directed over the cooling fins will
improve cooling feature dramatically. DO NOT enclose the amplifier in a small
box or cover it that air cannot flow around the fins.
Temperatures in the car trunks have been measured as high as 79 degrees
Celsius in the summer. To achieve maximum flow in enclosed trunk,mount the
car amplifier to vertical position.

We recommend minimum AWG 15# (1,5mm2) speaker cable. The detailed connection
ways are shown in page 7~9.

We recommend minimum AWG 15# (1,5mm2) speaker cable. The detailed connection
ways are shown in page 7~9.

ICE-150.2 40A 20mm2 (AWG 4-5)
ICE-150.4 80A 20mm2 (AWG 4)
ICE-150.2
use with high electric current.

ICE-150.2 40A 20mm2 (AWG 4-5)
ICE-150.4 80A 20mm2 (AWG 4)
ICE-150.2
use with high electric current.

RMS @ 4OHM (THD<1%)
RMS @ 2OHM (THD<1%)
RMS @ 4OHM Bridged
(THD<1%)
THD at 4ohm load 30%
rated power
Gold-plated isolation
terminals
Frequency Response
Measured with operation
voltage 14.4V 14.4V
53x228x40753x228x300

RMS @ 4OHM (THD<1%)
RMS @ 2OHM (THD<1%)
RMS @ 4OHM Bridged
(THD<1%)
THD at 4ohm load 30%
rated power
Gold-plated isolation
terminals
Frequency Response
Measured with operation
voltage 14.4V 14.4V
53x228x40753x228x300