SQ Professional SQIM 4010 User manual

PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE USE.
SQIM 4010-4011 28-03-2023 V7 | ©2023 SQ Professional Ltd
instruction manual
ELECTRIC HOT PLATE

2
2
3
2
1
1
Due to hot parts and potential hazards, this
appliance should not be used by children
under 16 years old unless supervised
by an adult.
Please keep the appliance and mains cable
out of the reach of children. This is not a toy!
If used by persons with reduced physical,
sensory or mental capabilities, instruction
and supervision must be given to
understand the use of the appliance and the
hazards involved.
Always disconnect the appliance from the
power socket if it is left unattended and
before assembling, disassembling
or cleaning.
If the mains cable is damaged, it must be
replaced by qualified persons in order to
avoid any hazards.
FEATURES
1 Hot plate
2 Indicator lights
3 Heat controller
• This appliance is intended for household use only.
• Ensure that the appliance is always placed on a
firm and flat surface, away from any edges of the
worktop. Do not place the appliance onto a metal
tray or metal surface whilst in use. Do not place
the appliance on, or near, a hot gas or electric
burner or in a heated oven.
• Keep the appliance and mains cable away from
the edges of worktops and out of reach of
children. Route the mains cable so it does not
overhang, and cannot be tripped over or caught.
• Do not let the mains cable run across an open
space, such as between a low power socket and
a table, or across any hot area, such as a cooker.
Heat may damage the mains cable.
• The connections on both sides of the mains cable
(the appliance and the power socket) should
never be strained. If the mains cable is damaged
it must be replaced by a qualified person or
service to avoid any hazards.
• This appliance must not be operated by an
external timer or a remote control system.
• If a crack appears on the hot plate , switch off
the power supply immediately and do not use
the appliance.
• Do not use the hot plate near or under
cupboards, curtains or combustible materials.
• The appliance is designed only for heating and
cooking food and must be used only when
cookware is placed on the hot plates .
The diameter of the cookware should be the same
as the diameter of the hot plate .
• Do not touch the surface of the hot plate 
when the appliance is in use.
• Read all operating instructions before using the
appliance.
SAVE THESE INSTRUCTIONS
FOR FUTURE REFERENCE.
HOT SURFACE!
1
3
3
2
IMPORTANT SAFEGUARDS
Do not use the appliance in a bathroom, near
water, or outdoors. Do not operate the appliance
with wet hands or bare feet.
Do not immerse any of the parts (appliance,
mains cable, plug) in water or other liquids
during use to protect from fire, electric shock and
personal injury.
Do not use the appliance if damaged or
malfunctioning.
Do not leave the appliance unattended whilst in
use. Use and store it out of reach of children.
Do not leave the appliance unattended when
heating oil.

3
BEFORE FIRST USE
Before using the appliance make sure the mains
cable is unplugged from the socket and heat
controller e is in the ‘0’ position.
• Cure the hot plates  by turning the heat
controller e to the highest setting (position
5) for 5 minutes to burn off their protective
coating. Ensure the room is well ventilated.
Switch the appliance off and let it cool
completely before wiping any residues from the
hot plates .
OPERATING INSTRUCTIONS
• Place cookware on the hot plate  then switch
the appliance on by turning the heat controller e
clockwise to desired position. The indicator light
wwill glow while the hot plate is heating up.
• Turn the heat controller eto the required position
(1-lowest temperature, 5-maximum temperature,
OFF-switched off), to achieve the desired
temperature. The indicator light wwill go off
when the set temperature is reached.
• When not in use, ensure that the heat controller e
is in the OFF position and disconnected from the
power outlet.
• Use cookware with flat, heavy base to ensure
good contact with the hot plates . Always
place the cookware centrally on the hot plates 
and position the handles safely out of the way.
Oversized pots which cover both hot plates will
overheat the hob and reduce its working life.
CARE AND MAINTENANCE
• Switch the appliance off, unplug the mains
cable from the socket and let the hot plates 
cool down completely.
• Mop up any spillage as soon as possible and do
not leave it to harden. Wipe all surfaces with a
damp cloth and a mild detergent.
• Do not use harsh or abrasive detergents or
scourers to avoid scratching the surface.
SPECIFICATIONS
Rated Voltage: 220-240V~
Frequency: 50Hz
Rated Power: 4011........ 1000W
4010 ..... 2500W (1000W + 1500W)
ELECTRICAL
The product must not be used without the fuse
cover fitted.
Should the power cable or the power plug
become damaged, arrange for these to be
replaced by Customer Service or a qualified
person before continuing to use the appliance.
The appliance is fitted with a 13A fuse (BS1362) in
a 13A plug (BS1363).
ENVIRONMENTAL
To reduce environmental and
health problems due to hazardous
substances in electrical and electronic
goods, appliances marked with the
symbol below must not be disposed of
with unsorted municipal waste. Please
repair, reuse or recycle appropriately.
SERVICE
The product is not user-serviceable. If it is not
working, read the instructions, check the plug
fuse and main fuse/circuit breaker. If it is still not
working, consult your retailer. If that does not solve
the problem ring Customer Service – they may be
able to offer technical advice.
Please have the Model Number to hand, as
they will not be able to help you without it. If you
are advised to return the product to us, pack it
carefully, include a note with your name, address,
day phone number, and description of the problem.
If under a guarantee, say where and when it was
purchased and include a valid VAT receipt. Send it
to SQ Professional Ltd.
GUARANTEE
The guarantee for this product is covered by
SQ Professional Limited. Any faults with this
product arising through a manufacturer defect will
be covered for 1 year from the date of purchase,
subject to a valid VAT receipt being presented.
This does not include faults or damage caused by
misuse of general wear and tear.
SQ Professional Ltd will not be held liable for
general wear and tear, or eventual damages to
persons, animals or objects caused by incorrect
installation or deriving from improper, erroneous or
unreasonable use.
Please contact customer services on 01992 716
070 or send an e-mail to [e-mail],
Monday to Friday from 09:30 - 17:30.
This does not affect your statutory rights.
All images are for illustration purposes only. Actual products may vary.

SCAN THE QR CODE TO EXPLORE
OUR FULL PRODUCT RANGE.
Voltage Business Centre, Units 1 - 3
6 Mollison Avenue, Enfield, EN3 7XQ
T: 01992 716 070 | F: 01992 700 538 |E: [e-mail]
WWW.SQPROFESSIONAL.COM