StarTech.com SCSI2CASE1 User manual

SCSI Drive Case
SCSI2CASE1
SCSI2CASE2
SCSI2CASE4
SCSI3CASE1
SCSI3CASE2
SCSI3CASE4
SCSI3CASE8
External Drive Case for 5.25" SCSI Device
Installation Manual

1
General Description
The StarTech.com SCSI/SCSI2/SCSI3 external drive cases provides a fast and easy way
for PC or Mac users to add between 2 and 8 additional 50 pin hard drives, CD-ROMs,
CD-RWs, or tape backup drives to their system. It provides 2 5.25 inch bays for
SCSI/SCSI2/SCSI3 devices. 3.5 inch hard drives can be installed by using a 5.25 to 3.5
inch drive adapter bracket (not included). These sleek looking cases feature a built-in
80W power supply with high capacity cooling fan to keep the drives running cool.
Getting Started
This section is designed to help you prepare the SCSI Case for installation. Please read
through this section carefully before attempting to install and SCSI Case.

Parts Description
For Single Cases
Overview
1) Cover 6) 5V/12V Power
2) Front panel frame 7) Key lock
3) Front panel 8) Lock pin
4) Power shield plate 9) HDD working LED
5) Wires cover box 10) Power LED
2

3
Top View
Back View
1) Working indicator 4) Audio output
2) ID Switch 5) Cooling fan
3) 50 pin cable (SCSI I/II), 68 pin cable (SCSI III)
12
3 4
5
6
1) Power output 4) ID Switch a) 0~7 for SCSI I/II
b) 0~15 for SCSI III
2) Power input 5) Connector - SCSI I/II/III
3) Power switch 6) Audio Output (for CD ROM only)

4
For Multicase
Overview
1
2
1) Chassis (Including panel and LEDs)
2) Cover

5
Top View
8
6
4
371
2
5
1) Power 5) HDD working indicator
2) Power switch 6) 50 pin cable (SCSI I/II),
68 pin cable (SCSI III)
3) Power cord 7) Audio outpu
4) Cooling fan 8) ID switch (4 pin for SCSI I/II)
(5 pin for SCSI III)

6
1
2
3 5
4
Rear View
1) Audio output (for CD ROM only)
2) Power output 4) Connectors
3) Power input 5) ID selector

Installing SCSI devices into the Drive Case
1. Locate the arrow buttons on both sides of the case. Press the buttons and lift the cover.
2. To install your devices:
a) For CD-ROM - Install the CD-ROM and join the connector, power & RCA jack
then fasten the enclosed screws on both sides of the interior side panels, securing
the device into place.
b) For Hard Drive Drawers - Install the Hard Drive Drawer and join the
connector & power then fasten the enclosed screws on both sides of the interior
side panels, securing the device into place. (To install drive drawers that are 3.5
inches requires an adapter bracket, such as the StarTech.com BRACKET)
c) For other devices, read the instructions on your device manual.
3. Join the connectors with the following descriptions:
ID Switch (SCSI I/II)
ID Switch (Wide SCSI)
HDD LED Out
Audio
Power
4. Close the cover.
Color Red Blue Yellow Black
Color Red Blue Yellow Brown Black
Color Yellow White
Color Red White Black
Color Red Black Black Yellow
ID SW 124COM
ID SW 124 COM
8
Yellow
LED +-
RCA
Jack Right Len COM
DC
power +5 COM COM +12
7