Steinberger Synapse EMGSYN-GP-1 User manual

MAT'L:
PART NO.:
PART:
645 MASSMAN DRIVE
STEINBERGER
[phone]
NASHVILLE, TN 37210
LTR REVISION DATEPCA NO.
DATE:SCALE:
DRAWN: CHK:
DIASYNGP
N/A
8/10/04
DIASYNGP
WIRING DIAGRAM - Steinberger Synapse EMGSYN-GP-1
.047uF
EXCEPT AS EXPRESSLY AUTHORIZED IN WRITING BY GIBSON, INC. MAY NOT BE REPRODUCED OR USED FOR ANY PURPOSE ARE THE CONFIDENTIAL PROPERTY OF GIBSON, INC. AND THIS DRAWING AND ALL OF THE INFORMATION HEREON NOTE:
RED WIRE FROM PICKUPS
AND BATTERY
(SOLDER TOGETHER AND COVER WITH HEAT SHRINK) BLACK (-)
BRIDGE P.U. (EMG 81)
NECK P.U. (EMG 85) BRIDGE GND
RED
RED RED
WHITE
SOLDER SHEILD WIRE TO GROUND
NOTE: A bridge ground wire should be installed in the
instrument but not soldered to the pot casing. EMG MODELS 81 AND 85 DO NOT REQUIRE A STRING GROUND.
A25K
A25K